Quantcast
Jump to content

Recommended Posts

Posted

When you take in all fees, discounts etc what is your all in discount rate on a monthly basis? What type of volume do you do?

 

We have a company who charges all in 1.44%.....everything...

Posted

When you take in all fees, discounts etc what is your all in discount rate on a monthly basis? What type of volume do you do?

 

We have a company who charges all in 1.44%.....everything...

 

Thats very low! Would it be ok if I msged you for a referral to your merchant provider?

Posted

Everyone pays the same bank processing fees . What you pay above that is the secret. After two weeks researching We choose Dharma merchant services . Saved us $200 the first month we changed over merchant service. No contract check out there website

Posted

Everyone pays the same bank processing fees . What you pay above that is the secret. After two weeks researching We choose Dharma merchant services . Saved us $200 the first month we changed over merchant service. No contract check out there website

True. We use WorldPay (First Mile). We pay a flat Fee per month ($200) no matter how many we process, then the bank fees. Have saved as much as $500 in both stores from old system (EPX)

Posted

True. We use WorldPay (First Mile). We pay a flat Fee per month ($200) no matter how many we process, then the bank fees. Have saved as much as $500 in both stores from old system (EPX)

 

 

Not true! I have been in the game almost 30 years and thought this was true. Had a close friend who did my processing at cost plus. When my current provider was referred to me I had my friend call him and find out that "catch" there was none and he told me he oculd find no reason not to go with this new company and had no idea how they could provide service below cost.

 

I have been with them almost 4 years and it's still 1.44% all in. Not above....I know he does this for the automotive industry only as I have wanted to refer him to others. E mail me and I will forward his info [email protected]

Posted

1.44% on all cards seems to good to be true. Many types of cards charge more than that. There are set interchange rates charged by the card companies (visa, mc, etc...) and for many types of cards it is higher than 1.44% (rewards cards, fleet cards, Amex, Disc), some are lower (debit cards and some others). Not sure how anyone could charge 1.44% all in for everything unless you are doing a whole lot more debit cards. We are doing over 10 million a year in credit cards and I have shopped many times over the last 30+ years and never seen anything that is one fixed flat rate. I have seen cost (interchange) plus plans and tiered rate plans (usually with 3-4 different rates on different types of cards). Would be interesting to see how this works.

  • Like 3
Posted

1.44% on all cards seems to good to be true. Many types of cards charge more than that. There are set interchange rates charged by the card companies (visa, mc, etc...) and for many types of cards it is higher than 1.44% (rewards cards, fleet cards, Amex, Disc), some are lower (debit cards and some others). Not sure how anyone could charge 1.44% all in for everything unless you are doing a whole lot more debit cards. We are doing over 10 million a year in credit cards and I have shopped many times over the last 30+ years and never seen anything that is one fixed flat rate. I have seen cost (interchange) plus plans and tiered rate plans (usually with 3-4 different rates on different types of cards). Would be interesting to see how this works.

 

FYI: I am not in any way affiliated with any CC processor.

 

That being said if you've never seen it I guess it cant be true.....but....if it is.....cant I get 50% of what you save the first year?

Posted

 

FYI: I am not in any way affiliated with any CC processor.

 

That being said if you've never seen it I guess it cant be true.....but....if it is.....cant I get 50% of what you save the first year?

Not saying it is not true, just saying I have never seen anything like it. Would like to see a statement or contract that showed how it worked. Is that your average rate or fixed rate for all cards processed? Do they charge the same for Amex, & Discover? What about debit cards, are they the same?

Posted

Not saying it is not true, just saying I have never seen anything like it. Would like to see a statement or contract that showed how it worked. Is that your average rate or fixed rate for all cards processed? Do they charge the same for Amex, & Discover? What about debit cards, are they the same?

So no 50%.... sigh........ e mail me

 

 

Sent from my iPhone using Tapatalk

Posted

A girl called me yesterday, made an appt. for today and came to see me. So I listened to her as I'm going to change my processor by March 31( my self-imposed deadline.) She told me that she (the company she works for) will process ALL my credit cards for 1 %, and process ALL my debit cards (Pin #) for 0%. Will charge me $129 per month for machine, plus a $31 fee, and that's it. *** She did say that AMEX is 1.77%. Others are 1% and 0 for debit cards.

 

I'm going to call some of her referrals and check her out. She's local and works out of an office 30 mins. from my shop.

 

Have any of you EVER heard of a processor this cheap? Any recommendations of what I should look for or questions I should ask her??

 

Thank you in advance!!

 

Hi-Gear

Posted

A girl called me yesterday, made an appt. for today and came to see me. So I listened to her as I'm going to change my processor by March 31( my self-imposed deadline.) She told me that she (the company she works for) will process ALL my credit cards for 1 %, and process ALL my debit cards (Pin #) for 0%. Will charge me $129 per month for machine, plus a $31 fee, and that's it. *** She did say that AMEX is 1.77%. Others are 1% and 0 for debit cards.

 

I'm going to call some of her referrals and check her out. She's local and works out of an office 30 mins. from my shop.

 

Have any of you EVER heard of a processor this cheap? Any recommendations of what I should look for or questions I should ask her??

 

Thank you in advance!!

 

Hi-Gear

Haven't heard that one. Visa/MC interchange rates are higher than 1% and I don't know of a way to get around them, unless she is saying she will charge you 1% on top of the interchange rates. $129 per month for a machine is expensive, Most lease rates are in the $30-45 range and the cost to buy outright maybe in the $400-$800 range depending on the machine. If you aren't doing a lot of volume, maybe the extra that is being charged for the machine and the monthly fee makes up for what would be lost on the interchange rates. They seem to be always trying to come up with a way to say and do things to make it look cheaper than what you have. I wouldn't change processors without seeing a comparison based on my current statement and an explanation of exactly how they get to their price based on my statements transactions. Also I wouldn't go into any kind of contract without being able to get out, if what they say doesn't pan out in the first month or two. One problem we had when changing processors once, was not getting out of our contract with the processor, but getting out of an equipment lease early, as these are usually done through a leasing company and done on a 36 or 60 month term with automatic renewals. Lots of things to check into when making a change, seem to learn something new every time we change.

  • Like 1
Posted

A girl called me yesterday, made an appt. for today and came to see me. So I listened to her as I'm going to change my processor by March 31( my self-imposed deadline.) She told me that she (the company she works for) will process ALL my credit cards for 1 %, and process ALL my debit cards (Pin #) for 0%. Will charge me $129 per month for machine, plus a $31 fee, and that's it. *** She did say that AMEX is 1.77%. Others are 1% and 0 for debit cards.

 

I'm going to call some of her referrals and check her out. She's local and works out of an office 30 mins. from my shop.

 

Have any of you EVER heard of a processor this cheap? Any recommendations of what I should look for or questions I should ask her??

 

Thank you in advance!!

 

Hi-Gear

$129 is really expensive for the lease and that is probably where they are making up the difference. I pay $29 each a month for my machines and they are new.

  • Like 1
Posted

I have learned that these middleman process companies can be very decieving. We switched to "Retreiver" recenlty. Rep is Jason Woodward. He has signed up

hundreds of Tire Pros dealers in last couple of years. They are a "direct processor" No middleman. Analysis said they will save is about $503 per month from our $4k bill.

  • 6 months later...
  • 4 weeks later...
Posted

We pay a flat 1.5 + .25 per swipe and 2.4 for keyed. Monthly fee is $20. Equipment is owned outright and was $75 shipped. Average is 1.5 to 1.8. We do key the occasional card. No contract. I have my money within 3 days. Integrates well with QuickBooks. 

  • 3 weeks later...
Posted
On ‎9‎/‎29‎/‎2017 at 5:13 AM, marentetteservice said:

We pay a flat 1.5 + .25 per swipe and 2.4 for keyed. Monthly fee is $20. Equipment is owned outright and was $75 shipped. Average is 1.5 to 1.8. We do key the occasional card. No contract. I have my money within 3 days. Integrates well with QuickBooks. 

What service are you using?

Posted
On 2/20/2017 at 10:02 AM, Richard Ehler said:

I have learned that these middleman process companies can be very decieving. We switched to "Retreiver" recenlty. Rep is Jason Woodward. He has signed up

hundreds of Tire Pros dealers in last couple of years. They are a "direct processor" No middleman. Analysis said they will save is about $503 per month from our $4k bill.

Been with retriever just a little over a year. First few months were great, with a net after all fees at 1.43 to 1.65. However starting this summer we have started to see fee creep. Last 4 months were 1.59, 1.65, 1.74, 1.96. I called Jason last week and he said that I'm probably doing more AMEX. I told him no, we haven't been processing any AMEX. He seemed puzzled and said he'd check it out and have an answer by the 17th. We'll see but apparently other Tire Pros dealers have noticed the same thing.

 

Posted

This is definitely something my husband and I need to research further before opening the shop.  I found this article that is specific to auto shops that I am going to look into further.  Thought this might be useful to others, as well.  I would love to know if any of you have used any of these and your opinions of them.  Someone had recommended Swipe and Square to me a while back so I thought this was something we would not really even need to research but it looks like we might be back at the "research" part on this (when I compare their rates to those y'all have listed above, they seem rather high).  Anyway, here's the link:  https://www.cardpaymentoptions.com/credit-card-processing/best-automotive/

 

  • Like 1
Posted

That is an interesting website that I will have to explore further. We are using our bank which averages overall about 2%. They provided the machine free of charge with no contract. Square is more expensive and seems to be suited better to small sales. 

Posted
10 minutes ago, MINI4U said:

That is an interesting website that I will have to explore further. We are using our bank which averages overall about 2%. They provided the machine free of charge with no contract. Square is more expensive and seems to be suited better to small sales. 

Yes, I agree...Square sounds expensive compared to the others many have listed in this post.  I have a friend who runs a local window tint shop and another friend who runs a local auto detail shop.  Both use Square...or at least they did the last time I was in their shops which has been a year or two.  I could see, though, where spending a little time researching these options could save a business quite a substantial amount of money each month.  

Posted

Square is way too expensive. I think the only places that use them are the ones that don’t research. I see small businesses using them, but they are not busy / high traffic businesses. We use Heartland Payment Systems for the last few years. My fee 1.59%, swipe fee is .05 or .10, and statement fee. After reading this post I am going to do some more research myself.


Sent from my iPad using Tapatalk

  • 3 weeks later...
Posted (edited)

Remember some companies break up the charges to deceive customers. I studied a colleagues account because I wanted 1% processing. Turns out he got a monthly statement that was fixed at 1.2% on all transactions; swiped, typed, cvc not present you name it. Looked good until we checked his bank statement😦. They deducted the interchange rate before depositing funds. All part of the contract. I had a similar  system when I first started, trust me I paid for that free equipment.  I didn't do a complete analysis but it ended up around 4% total. 

We pay about 2.7% average because we accept Amex, discover, over the phone. Pin entry with chip inserted is the best and cheapest way to get paid. 

What burns me is I'm paying 2.7% to collect sales tax for the state. Do the math. It costs us money to collect sales tax. The credit caps out fast if we do even moderate volume. 

Some months it's below 2% but being in a college town keyed entries are common, as are multiple cards for a relatively low purchase. It all adds up. 

Edited by alfredauto
  • Thanks 1
Posted
6 hours ago, alfredauto said:

Remember some companies break up the charges to deceive customers. I studied a colleagues account because I wanted 1% processing. Turns out he got a monthly statement that was fixed at 1.2% on all transactions; swiped, typed, cvc not present you name it. Looked good until we checked his bank statement1f626.png. They deducted the interchange rate before depositing funds. All part of the contract. I had a similar  system when I first started, trust me I paid for that free equipment.  I didn't do a complete analysis but it ended up around 4% total. 

We pay about 2.7% average because we accept Amex, discover, over the phone. Pin entry with chip inserted is the best and cheapest way to get paid. 

What burns me is I'm paying 2.7% to collect sales tax for the state. Do the math. It costs us money to collect sales tax. The credit caps out fast if we do even moderate volume. 

Some months it's below 2% but being in a college town keyed entries are common, as are multiple cards for a relatively low purchase. It all adds up. 

Wow! That's slick, taking the charges before depositing the money. Surely he should have caught that as he was reconciling the bank statement though! I use Paul, as recommended by xrac. Great guy. He'll tell you more than you care to know. I'm consistently around 2% total, out the door, everything. The only thing I don't like is being under a contract, but given the fact that there are so many shady credit reps that will lie to get you to come on board with them, I can understand it. I'd highly recommend Paul.

  • Like 1
Posted
1 hour ago, xrac said:

Paul is a good guy but he is hard to get off the phone with. 

😂 He will keep you on the phone longer than you really want to. But such a nice guy! You can tell he really cares about his clients and getting them the best deal. Night and day difference between him and some of the scum I've dealt with in the past.

  • 4 weeks later...
Posted

So I never thought to do an out the door price evaluation. I just did one and found I am hovering between 2.2% and 2.3%  I pay nothing on my machine. I am pretty happy with this rate. I am not interested in making a change as I trust these folks. The owner drove up here to drop a new machine off to me once.  I call and speak with the same two women every time I have an issue.

Posted
5 minutes ago, xrac said:

We have the same person to talk to any time we call and he is very helpful. We also receive all of our equipment for free and have no contract.  We average about 1.74% versus the 2.2% you are paying.  That is .46% which means at least $460.00 more for every $100,000 in credit card sales.  For us that cost would be in excess of $2,000.00. 

Any chance you would be willing to PM me a statement? This just sounds to  good to be true.

Posted (edited)
9 minutes ago, xrac said:

Here is cover page of the October statement. 

IMG_1028[1].JPG

So, I rounded up, I am actually like 2.174......  So I wuld look at you as being 1.8 if I rounded up.  And if you read that statement at the bottom there, looks like you are about to be bumped up to 2.0 unless you have worked that out with them.  Still better, but I duno if it is enough to make the jump, and what happens next year when it goes up another .02%  Does this include AMEX?

Edited by Hands On
Posted

I have posted two to show how a rate can vary from month to month. One thing that will make it vary is average RO. Since many cards to have a cost per swipe, if you have to swipe it twice as many times in a month to make the same amount of money, you will pay more.   Also, if all of your customers use some huge major rewards card for every transaction in a month you are going to pay more.  And if everyone comes in with Debit you will pay less. One thing I would like is if my merchant offered a free debit transaction deal, but I have not looked into it yet. I would need a pin pad I think.  I forget which is which, but one of these shows about 2.2% and the other shows about 2.1%, which puts me so close to you once your .02% increase hits that we may be dead even and I had a lower RO or more folks with Fancy cards. This does include my AMEX fees.

20171204_143125.jpg

Posted
16 minutes ago, xrac said:

I have been with this provider about 7 years and fees have stayed stable.  The switched to chipped cards has created some increase in costs related to security. I suspect that is across the board with all vendors.  One of the things is every month they run a security scan on our system to see if we pass.  This is through something called Trustwave.   

I imagine they all do this, its part of the PCI compliance I imagine we all have to do.

 

I think these statements are good for the folks thinking of starting up also, this might be one of the many hidden costs of ownership that are forgotten when dreaming of all the money you will be making starting your own shop.

Posted
12 minutes ago, xrac said:

Amex is through Amex.  Car-x has a national account deal with Amex.

So that is another thing to take into consideration when comparing our two statements.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Drivi
      Hey everyone,
      I'm building a tool that helps auto repair shops plan preventive maintenance automatically — it predicts when each customer should come back, sends reminders, and helps keep the shop busy year-round.
      But before I go any further, I’d rather hear it from real shop owners:
      How many hours or bays do you usually have sitting empty every month?
      What percentage of your work is planned maintenance vs emergency jobs?
      Do you use any system right now to remind customers about service? How well does it work?
      What would make you not trust an AI system that claims to schedule customers automatically?
      I’m not here to pitch vaporware — I want to understand how shops actually think about preventive work and downtime.
      If a few of you are curious, I can share a short demo and would love your honest feedback.
      Thanks for sharing your experience — it’s worth way more than any market research report.
    • By Hands On
      The emailed me a form to sign up to be a "service provider" The company Service Up will send me the client. They will bill the client and pay me after the repair. Look at some of the highlights from the terms:
       All transactions completed through the Platform are subject to a transaction fee ranging from 1.99% to 10% of the gross amount of each repair, with a baseline marketplace fee of 3.99% unless otherwise specified in a fleet-specific addendum.
      The marketplace fee applicable to a given repair is one of the following:
      • 3.99% (baseline) of the gross amount of all repairs completed through the Platform for all other customers, including customers to whom ServiceUp has referred you.
      • A rate specified in a fleet-specific addendum, which overrides the baseline, provided such rate falls within the 1.99%–10% range stated above.
      In addition to the marketplace fee, the following optional fee may apply:
      • QuickPay fee — an additional 3.50% of the gross amount of the repair if you elect to receive early payment (typically next business day). In the event a credit card is used by the customer for payment, the 3.50% QuickPay fee will be automatically applied.
      So, the fee they charge is any where from 1.99% to 17% if they pay credit card and you want funds next day
      Company reserves the right, in its sole discretion, to modify, increase, decrease, or otherwise change the transaction fees, early payment fees, or any other amounts payable under these Terms at any time. 
      But those fees could go up with no notice at all
      The Company shall remit payment to you net of any applicable transaction fees as promptly as practicable after, and contingent upon, Company’s receipt of payment from the applicable fleet customer for the services rendered by you. 
      They will pay you for the work you did, as long as they are able to get paid.
      You acknowledge and agree that the Company shall not be responsible for any delays or failure to pay that may be caused by a fleet customer.
      And if the customer fails to pay them, too bad.
      You further acknowledge and agree that (i) the Company may withhold funds in the event of any dispute between you and the Company pending the resolution of such dispute, (ii) you shall not collect any fees for services rendered hereunder directly from a fleet customer and shall receive payment for such services solely from the Company, (iii) in the event the Company determines that you have violated the foregoing subsection (ii), the Company shall have the right to charge a penalty of 10% of the gross value of the applicable services and may withhold that amount from future payments or debit your bank account to recover the penalty and any applicable fees for services.
      AND if they customer fails to pay them and you go directly after the customer yourself, tack on another 10%
      So basically, you fix our cars, and we maybe pay you after we take fees.
      Has anyone used this platform? What do you think?
    • By carmcapriotto
      Thanks to our Partners, NAPA TRACS, Today's Class, KUKUI, and Pit Crew Loyalty Watch Full Video Episode Recorded live at VISION 2026, this episode highlights the General Service Technician Academy (GSTA), a two-day training program offered at VISION designed to build strong foundational skills for early-career automotive technicians. Host Carm Capriotto speaks with industry leader and shop owner Travis Troy and two young technicians who completed the program about how mentorship and structured training are shaping their careers.
      The discussion emphasizes that great technicians are distinguished not by advanced tools alone, but by how well they execute fundamental skills. The GSTA curriculum covers essential, practical topics including OSHA training, lift safety, fluids and oil, tire safety and repair, alignments, thermal management (A/C), and hands-on electrical training.
      The academy addresses a critical training gap in the industry through a hands-on learning model that encourages participants to learn it, practice it, and teach it, reinforcing both understanding and communication. Mentorship plays a key role in guiding young technicians who often face unclear career paths and discouraging workplace experiences, helping them build confidence, opportunity, and long-term direction.
      Ultimately, the conversation reinforces a culture of continuous learning, highlighting that both new and experienced technicians benefit from revisiting the fundamentals to maintain safety, productivity, and professional growth in an increasingly high-tech automotive industry.
      VISION Hi-Tech Training & Expo: https://visionkc.com/
      Travis Troy, Honest Wrenches, Akeny and Des Moines, IA. Listen to Travis’ other episodes HERE
      Kreon Golden, All Star Automotive, Columbia, MO
      Jose Franssen, Skalackys Auto Repair, Fargo, ND
      Thanks to our Partner, NAPA TRACS NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Thanks to our Partner, Today's Class Optimize training with Today's Class: In just 5 minutes daily, boost knowledge retention and improve team performance. Find Today's Class on the web at https://www.todaysclass.com/ Thanks to our Partner, KUKUI Stop juggling multiple marketing tools. KUKUI’s integrated platform delivers 4x better website conversions, automated follow-up, and real-time ROI tracking. Get industry-leading customer support with KUKUI at https://www.kukui.com/ Thanks to our Partner, Pit Crew Loyalty You’re probably tired of chasing new customers who never return. We understand. Pit Crew Loyalty ends the one-and-done cycle, turning first visits into lasting, reliable revenue at https://www.pitcrewloyalty.com/ Connect with the Podcast: - Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ - Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters - Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 - Subscribe on YouTube: https://www.youtube.com/carmcapriotto - Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ - Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ - Follow on Twitter: https://twitter.com/RResultsBiz - Visit the Website: https://remarkableresults.biz/ - Join our Insider List: https://remarkableresults.biz/insider - All books mentioned on our podcasts: https://remarkableresults.biz/books - Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom - Buy Me a Coffee: https://www.buymeacoffee.com/carm - Special episode collections: https://remarkableresults.biz/collections - The Automotive Repair Podcast Network: https://automotiverepairpodcastnetwork.com/ - Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion. https://remarkableresults.biz/ - Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. https://mattfanslow.captivate.fm/ - Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. https://huntdemarest.captivate.fm/ - The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. https://autorepairmarketing.captivate.fm/ - The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. https://chriscotton.captivate.fm/ - Speak Up! Effective Communication with Craig O'Neill: Develop Interpersonal and Professional Communication Skills when Speaking to Audiences of Any Size. https://craigoneill.captivate.fm     Click to go to the Podcast on Remarkable Results Radio
    • By carmcapriotto
      Thanks to our Partners, NAPA TRACS, Today's Class, KUKUI, and Pit Crew Loyalty Watch Full Video Episode "I think the push back is more in our head than it is in the pocketbook."
      In this episode, host Carm Capriotto talks with Andy Fiffick and Chris Letendre about the perceived affordability crisis in auto repair. Both guests challenge the idea that customers can’t afford repairs, suggesting that price resistance often stems from the service advisor's mindset rather than customer reality.
      The discussion highlights practical strategies for improving repair approvals, including repackaging repairs with different parts or warranty options, presenting financing as “payment option plans,” and avoiding the “Sophomore Jinx,” where advisors begin to pre-judge what customers can afford. They also address the “maintenance-free” myth promoted by automakers and encourage shops to proactively educate customers with long-term maintenance planning.
      Ultimately, the episode reinforces a key truth: auto repair is a relationship business. When shops build trust and focus on helping people, price objections become far less common.
      Andy Fiffick, CEO Rad Air, Listen to Andy’s other episodes HERE
      Chris Letendre, American Pride Automotive
      Thanks to our Partner, NAPA TRACS NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Thanks to our Partner, Today's Class Optimize training with Today's Class: In just 5 minutes daily, boost knowledge retention and improve team performance. Find Today's Class on the web at https://www.todaysclass.com/ Thanks to our Partner, KUKUI Stop juggling multiple marketing tools. KUKUI’s integrated platform delivers 4x better website conversions, automated follow-up, and real-time ROI tracking. Get industry-leading customer support with KUKUI at https://www.kukui.com/ Thanks to our Partner, Pit Crew Loyalty You’re probably tired of chasing new customers who never return. We understand. Pit Crew Loyalty ends the one-and-done cycle, turning first visits into lasting, reliable revenue at https://www.pitcrewloyalty.com/ Connect with the Podcast: - Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ - Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters - Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 - Subscribe on YouTube: https://www.youtube.com/carmcapriotto - Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ - Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ - Follow on Twitter: https://twitter.com/RResultsBiz - Visit the Website: https://remarkableresults.biz/ - Join our Insider List: https://remarkableresults.biz/insider - All books mentioned on our podcasts: https://remarkableresults.biz/books - Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom - Buy Me a Coffee: https://www.buymeacoffee.com/carm - Special episode collections: https://remarkableresults.biz/collections - The Automotive Repair Podcast Network: https://automotiverepairpodcastnetwork.com/ - Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion. https://remarkableresults.biz/ - Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. https://mattfanslow.captivate.fm/ - Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. https://huntdemarest.captivate.fm/ - The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. https://autorepairmarketing.captivate.fm/ - The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. https://chriscotton.captivate.fm/ - Speak Up! Effective Communication with Craig O'Neill: Develop Interpersonal and Professional Communication Skills when Speaking to Audiences of Any Size. https://craigoneill.captivate.fm     Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors

×
×
  • Create New...