Quantcast
Jump to content

Recommended Posts

Posted

When you all interview a potential technician, do you have a specific series of technical/behavioral questions you use to determine his/her diagnostic aptitude? The reason I ask is we have had technicians in the past who have been mechanics for 10+ years but after hiring them we find out they are not very strong in diagnostics, especially electrical. Just trying to see if there was something you all do during the interview process that helps you identify if the candidate is going to be strong in diagnostics.......

Posted

The few people I have had apply I always put through a working interview. I always have at least 1 car that I am flipping and have them do a repair to the vehicle. One guy that I though was more of a parts changer I put on head gaskets on a toyota 3.4 and now I have to put it back together.

 

Another one said he was a good electrical guy and I pulled the ATC fuse on a chevy truck and the service 4WD light came on. He scanned it, had no communication, sat down in front of a wiring diagram and then walked over to the truck to look for the fuse and saw where I pulled it. He got a job.

  • Like 1
Posted

I just spoke to my lead technician today and we are going to implement that idea on my personal vehicle for our next interview with a potential technician. I think it will give us a better understanding of if the technician's thought process for diagnostic work is what we are looking for or not.

  • Like 1
Posted (edited)

That's why I insist on ASE certification. In my opinion the company lacks severely in marketing us but if a guy can't pass the tests I don't want him working on my car. The tests are easy for anyone who knows what they are doing. I hire people that are ase certified and can pass a drug test, that last one seems to be the most difficult for some. Lately I've put new hires on a 2-4 week trial, their work ethic and attitude shows itself quickly. Everyone starts like I did, at the bottom. Some guys are too good to sweep or fix flats, they would prefer to watch the guy who signs their checks do the bs work. Lol

 

I like the idea of the skills test, but do you pay the applicant while he's proving himself?

Edited by alfredauto
  • Solution
Posted

5 star, I developed a pre employment questionnaire for a client that asks specifically about their experience with the following scale.

 

1. no experience

2. not frequently performed

3. need help performing

4.. need little help

5. no help needed

 

Next I have questions about 20 plus tasks routinely done at this shop. Then a technician tool inventory , ASE Certs, 20 ASE style questions that indicate specific skills for this shop. This is filled out with the application on site and never leaves the shop.

 

The following admonishment is listed at the top :" Failure to answer the following questions truthfully could result in reduced wages or termination if you are hired and it is discovered you were not truthful" .

 

 

This has help the shop enormously, After reviewing a few of these you will interview ONLY the great applicants .

  • Like 1
Posted

Passing a drug test is the biggest hurdle.

Is there a drug test you can test someone to see if they are doing drugs on the job? No there isn't. What someone does at home is there business is it not. Until there is a test that will I don't support these so called drug test. Don't you think its against peoples rights?

Posted

I would also like to get a copy of the questions.

 

In Rhode Island the law states that you can not send an employee for drug testing after hire. Only before you hire can you test for drugs.

Posted

So I have a tech coming in for an interview this Friday so I decided to put together my own written test. I tried to attach it, but I received an error. Here it is pasted below for you all to use:

 

 

 

1. Technician A says constant-running release bearings are used with hydraulically controlled clutches. Technician B says release bearings move away from the pressure plate to disengage the clutch. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

2. All of the following are true about removing a differential assembly EXCEPT:
A. the axle shafts must be removed.
B. the bearing caps should be marked to the housing.
C. the bearing races and shim pack should not be mixed up.
D. the pinion gear always stays in the axle housing.

3. Which of the following is the best way to check component wear when assembling a transfer case?
A. Prelube the components
B. Clean components thoroughly
C. Clean all sealing surfaces
D. Measure clearances

4. The ignition module uses the digital signal received from the PCM for:
A. rpm input.
B. Hall effect timing.
C. #1 cylinder signal.
D. Computed timing signal.

5. While testing a vehicle for no-start, Technician A says that since there is battery voltage at the electric fuel pump connector with no fuel pump operation it must be a bad fuel pump. Technician B disagrees stating that a voltage drop check should be made at the fuel pump connector before the fuel pump is replaced. Who is right?
A. Technician A only
B. B only
C. Both A and B
D. Neither A nor B

6. A 12-volt battery has just failed a capacity test and is being charged at 40 amps. After three minutes of charge, with the charger still operating, a voltmeter is hooked up across the battery and reads 15 .8 volts. What does this indicate?
A. The battery should be slow charged and put back into service.
B. The battery’s electrolyte should be replaced.
C. The battery is sulfated and should be replaced.
D. This is normal; continue fast charge and return to service.




7. During a stall test, the stall speed is above specifications. Technician A says the exhaust system may be restricted. Technician B says the engine may have low compression. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

8. A customer explain that, “Intermittently the MIL will come on, and transmission will only have one forward speed.” Sometimes after the ignition is cycled the transmission functions normally until the same scenario reappears. While pressure testing, pressure in all ranges are found to be high. Technician A says the problem could be intermittent loss of electrical power to the transmission. Technician B says out-of-range turbine-to-output shaft speed sensor ratio during a shift could be the cause. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

9. During a main line pressure test, the pressure gradually decreases at higher engine speeds. The MOST likely cause of this problem could be:
A. a worn oil pump
B. a restricted oil filter.
C. a stuck pressure regulator.
D. a plugged modulator hose.

10. The headlights on a vehicle go out intermittently and come back on in a few minutes. Technician A says this problem may be caused by an intermittent short to ground. Technician B says this problem may be caused by high charging system voltage. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

11. With the ignition switch off, the ohmmeter leads are connected from the starter solenoid S terminal to the solenoid case. The ohmmeter provides an infinite reading. The cause of this reading could be:
A. the solenoid pull-in winding is grounded.
B. the solenoid hold-in winding is open.
C. the solenoid pull-in winding is shorted.
D. the solenoid hold-in winding is shorted.

12. While diagnosing the cause of a blown fuse in the blower motor circuit, Technician A says a short in the blower motor circuit could cause the fuse to blow. Technician B says an open field winding in the blower motor could have caused the fuse to blow. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B
13. A technician finds that an air-conditioning system has excessive high-side pressure. The low-side pressure is normal to high. A probable cause of this problem cause of this problem is:
A. the condenser air passages are restricted.
B. a leaking thermostatic expansion valve.
C. an open bypass valve.
D. a malfunctioning vapor control switch.

14. Technician A says that excessive steering wheel play can be caused by worn tie-rod ball sockets. Technician B says that steering wheel play can be caused by a worn idler arm. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

15. The thrust angle on a front-wheel drive vehicle is more than specified, and the thrust line is positioned to the left of the geometric centerline. This problem could be caused by:
A. Excessive toe-out on the left rear wheel.
B. Excessive toe-out on the right rear wheel.
C. Excessive positive camber on the left rear wheel.
D. Excessive wear in the left rear lower ball joint.

16. A voltage-drop test is performed on the fuel pump circuit. Technician A says a low-voltage drop across the fuel pump indicates that the fuel pump is serviceable. Technician B says that a high-voltage drop across the fuel pump relay switch indicates that the switch is serviceable. Who is right?
A. Technician A only
B. Technician B only
C. Both A and B
D. Neither A nor B

17. Engine Coolant Temperature integrity is being discussed. Technician A says the ECT readings can be compared with the IAT readings after the vehicle has set for at least eight hours. Technician B says the ECT should set a fault code if it is faulty. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

18. During a cylinder leakage test, the engine is found to have 90 percent leakage on two cylinders next to one another. Neither cylinder will stay at top dead-center during the test. Which of these is the Most-Likely cause?
A. Burned exhaust valves on both cylinders
B. Holes in the top of the pistons
C. A damaged head gasket
D. A collapsed lifter or lash adjusters both cylinders




19. A loud thumping noise is present during all engine speeds. If the oil pressure is normal, which of these would MOST likely be the cause?
A. Worn pistons and cylinders
B. Loose flywheel bolts
C. Worn main bearings
D. Loose camshaft bearings

20. Undercar Specialist A says an oxygen sensor can be a voltage-producing sensor. Undercar Specialist B says an oxygen sensor is a thermistor sensor. Who is right?
A. A only
B. Specialist B only
C. Both A and B
D. Neither A or B

21. Undercar Specialist A says if vacuum is applied to a positive back pressure EGR valve when the engine is off, a good valve will open. Undercar Specialist B says if vacuum is applied to a negative back pressure EGR valve when the engine is off, a good valve will open. Who is right?

A. A only
B. Specialist B only
C. Both A and B
D. Neither A or B

Posted

We do something very similar. A test is the only way to test real knowledge, but it doesn't test for anything else. The interviews and personality test must be completed also.

Posted

I have the pre employment questionnaires ready to send. I will be emailing them today. If you would like one, and have not contacted me yet, just sent me your email address. Thanks

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics

    • By Chuy Reyna
      One of my goals this year is to "Brand" the shop and really push my marketing! One of the local attorneys in town is using a billboard and he said it's the best move he's made for marketing.
       
      My shop is In a small town of about 25k population. There is about 5 large "poster" boards around town, Once you pull into town about 1 mile before our shop there's a billboard, Our shop is on one of the main streets in town behind a gas station(hidden) The land lord will not let me put up a big sign on the road. So the alternative, is billboards??
       
      My question is, has anyone ever used one?? If so, do they work?
       
      It's pretty expensive, 800 a month.
    • By Bob K
      One year ago we signed a 12 month contract with Dexmedia to build our first website for 140.00 per month. Until recently, we really didn't do much with customizing it with our own pics and new content. I just didn't make it a priority. So now that I am making marketing a part of my day, do you think I should end it and build one myself ? I just wonder if I'm paying too much. The score the site has is 55 out of 100. The rep showed me that the site had 1700 views and generated just over 700 calls. What do you think?
    • By brian61
      I am thinking of changing my internet advertising company. Has anyone used justthebestmarketing.com before and what kind of results did you get?
    • By Riccardo

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By babyhydro
      Looking to do mail outs to new customers in specific areas. Does anyone know how or where to obtain mailing lists for specific areas/subdivisions?


  • Our Sponsors

×
×
  • Create New...