Quantcast
Jump to content

Recommended Posts

Posted

Shift Happens

Jo was a new customer referred by an old-time regular. Her little KIA had a transmission problem that seemed to be getting the best of the transmission shop. The story goes that the SUV was constantly in limp mode, and would never shift properly… ever. As it always seems to be the case when a simple problem can’t be solved simply, somebody started the diagnostics off in the wrong direction. Little did I know this was a simple problem…. But, as I see it, each and every type of diagnostic work that you do requires a certain step by step procedure that you must follow. Miss a step, or completely overlook a step, usually means you’re going to miss that simple problem all together. This was no exception.

From what information I could gather the person who diagnosed it at the transmission shop wasn’t the same person who installed it. So after the tech put the last bolt in the transmission, he set the car out front, and told the front office, “Got the transmission in that KIA.” The front office considered it done, and the call went out for Jo to pick it up. She didn’t make it around the block before she was back at the front counter in a “not-so” pleasant mood. You can just imagine the situation at the counter… not pleasant I’m sure. After some deliberation, and very little diagnostics the transmission shop came up with the conclusion that it must be a bad transmission. Luckily, Jo’s ride that had brought her there was still in the parking lot, so she left the KIA for them to re-do the whole job again.

A week later, it was supposedly done. This time a different tech had installed the second transmission. Unfortunately, he made the same mistake as the first tech. When Jo came to pick up her car the shop owner took her for a ride to be sure that the repairs were made to her satisfaction. It was a short drive… This time, the owner said he was going to pay for the transmission, and would even purchase one from the dealership just to be sure it wasn’t their mistake in rebuilding it. But even the dealer transmission failed to shift properly. The tranny shop was at a loss, they decided to make a few calls for some help, and that’s when my phone rang.

Now, I’m not one to diagnose anything over the phone. I just don’t think it’s a smart way of taking care of such problems, because you never quite know what you’re getting into. But the tranny shop owner sounded desperate, and now the repair costs were coming out of his pocket. From his frantic explanations of no codes, no shift, and no idea of the problem, he kind of put me on the spot … so … I suggested a computer. Heck, why not… ya’ changed the tranny 3 times for Pete’s sake, obviously that ain’t’ it. I probably shouldn’t have done that, but I think he wanted to try and save as much money as possible without resorting to taking it to another shop.

Well, a new TCM didn’t work either…. Now, the car is finally coming my way. Jo was a little unsure whether or not there was anyone out there who could find the problem, but her friend told her that it couldn’t hurt to let me see what I could do for her. I’ll give it a try.

When the car showed up at the shop I took it around the block once to verify the condition, and then put it up on the lift. While it was on the lift I decided to drop it into gear and check it against the scanner. To my surprise, it shifted perfectly. I’m not kidding… absolutely perfect. I dropped it back on the ground, and went for a ride again. I didn’t even make it around the first corner… stuck in limp mode just as it was before, this dang thing can’t pull itself out of a pot hole.

Back up on the lift, and wouldn’t ya know it, shifts perfectly… AGAIN! What’s the deal here? I did it several times, just so I could be sure of the results I was getting. After a few trips I checked the wiring to the transmission while it was on the ground. Oh, oh, the main ground to the TCM wasn’t there. How in the world was it there when it was in the air? AH HA! It’s moving the wire! Yes, it was moving the wire alright, and a few more than just the TCM ground lead. The locator page showed the TCM ground wire was bundled with several other ground leads that were all attached to the main chassis ground… which wasn’t attached to a thing, but was dangling by the battery box.

Turns out the whole problem started when she had her battery changed at a department store repair shop, and they didn’t have the right size to fit the car. They disconnected the chassis ground wire, so the taller battery would fit.

When I told Jo what I found, the two of us pieced together the how and why it happened. Her only comment was, “Well, shift happens”.

All said and done with, the transmission shop paid for the entire repair, and gave her back what she spent with them. Everyone involved was glad to have the problem solved, and the car back on the road as good as new. I like this gal, she’s become a regular at the shop these days. What a card! Always has some sarcastic comment for me, but at the same time a very understanding nature and takes life in stride. I’d love to have a couple of dozen customers just like her.

As she always tells me… “If you can’t live on the bright side of life… start polishing the dull one.”

 

 


View full article

  • Like 3
Posted

Last week I got an email from a repair shop in Ohio that used this story as a way to fix their customers car. Almost identical situation.

Makes a guy smile from ear to ear thinking that a silly little story helped out a fellow repair shop.

 

awesome.

  • Like 1
Posted

For the old timers around here, you've seen this story before. Ok Ok, got lazy this week... LOL didn't get anything worthwhile wrote down, but... this story kept me thinking of what the other repair shop did to fix the car. So, I thought I'd share it again.

  • Like 2
Posted

Gonzo, I loved it! You had me reminiscing about a 2006 Nissan Altima that came in with a crazy electrical problem.

 

I am an electronics kinda guy, so I will give the $1,000,000 dollar secret away to you guys. After I tell you about this Altima.

 

The customer came in and told us the car had been to the dealer and other numerous shop and they could not fix her car. The problem was that the car would go into limp mode from time to time and it would become "undriveable".

 

It didn't do it all the time, but just some times when it would rain or the weather was cold. There would be no codes, but when it failed it would light up like a Christmas tree and a whole slew of codes would pop up on the scanner.

 

When we checked it, the first thing I noticed was that the battery terminals were heavily sulfated. This was the first clue that the prior techs checking this car didn't do proper diagnostics. I also noticed that there had been some cosmetic repair work. I asked the customer if the car had been in an accident, and she said that yes, there had been a fender bender that required the car a/c condenser replaced and some other "front" parts.

 

I used Mitchell to find all the grounding points and found a plastic shim on one of the main ground points for the wire harness. Having seen a problem similar to this before, I took the car for a drive to see if I could reproduce the problem. I turned on all electrical loads and while driving on a vacant back road slammed on the brakes. Guess what, when the ABS activated the car when berserk, lights flickered and then shut off. I knew right then, I had an electrical grounding problem.

 

Limped back to the shop, cleaned the battery terminals and re-grounded the harness, went back out and did my little test, no problem. Had the master tech give it the "second pair of eyes" once over, and called the customer to pick up her car, She has been a regular for about four years, and has become one of our biggest fans.

 

So, the $1,000,000 secret is to always begin with the very basics, don't assume anything, always check for clean solid power, this will solve a good 80% of your problems.

  • Like 3
Posted

Last week I got an email from a repair shop in Ohio that used this story as a way to fix their customers car. Almost identical situation.

Makes a guy smile from ear to ear thinking that a silly little story helped out a fellow repair shop.

 

awesome.

 

Great story, and I agree - that's the best feeling in the world getting an email like that.

  • Like 1
Posted

Gonzo, I loved it! You had me reminiscing about a 2006 Nissan Altima that came in with a crazy electrical problem.

 

 

HarrytheCarGeek, I had a similar problem not to long ago, a 3.5 nissan don't recall if it was a maxima or altima, but it kept having multiple cylinder missfires that kept changing cylinders. The car had been two at least two other shops and along the way it had all the coils and plugs replaced the owner was told it had a bad computer.

 

I got the car in the shop took it for a test drive noticed two things right off the bat, when first started the instrument cluster was a second or so behind the starting of the engine (didn't register for a split second), then when driving the car it didn't feel right shifted a little funny just felt off.

 

Pulled the car back in the shop and started with basics power and ground connections, found that the ground cable from the battery goes to a little bracket bolted to the back of the transmission, the bracket and the cable end were very rusted. I took the bracket and cable off took them over to the wire wheel cleaned them nice and shiny gain took some sand paper cleaned the trans up applied a very thin coat of dielectric grease put everything back together presto car started fine gauges right in time with the engine and it drove great.

 

The customer came back two days after picking the car up and gave me a $100 dollar tip said he had spent hundreds of dollars trying to get the car fixed and I charged him 1.5 hours labor . He said the car had not run that well in a long time he was so pleased with the price and the out come. I find that now a days with all the electronics in cars a lot of people over look the basics and that is where we all need to start sometimes the strangest problems are the easiest to fix. We have to learn to crawl before we walk , start with the basics first.

  • Like 4
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics

    • By carbtech72
      our fall downturn has reared its ugly head and we've had a pretty rough summer as well. Losing a lot of the general repair/maintenance/gravy work to mobile mechanics and their traveling side shows. So our bank account took a huge kick to the bag and we need to do a little more advertising. We gone the Craigslist route, a customer referral program and well made postcards that we place everywhere that they will let us. Anyone else have any ideas when you are operating on a shoestring budget but need to advertise
    • By ncsvoboda7
      Hey guys anyone using an online one stop shop for marketing?
       
      There are some really cool website developers out there that are web-based and also offer marketing solutions such as mswebpros.com.
       
      Would like to find some others that also do marketing online, social media and even locally.
    • By carmcapriotto
      Thanks to our Partners, NAPA TRACS, Today's Class, KUKUI, and Pit Crew Loyalty Watch Full Video Episode A viral social media clip about ADAS calibrations sparked thousands of comments and exposed a troubling reality: many automotive professionals still misunderstand when and why calibrations are required. In this episode, Carm Capriotto welcomes technical specialists and industry leaders Keith Perkins and Matt Fanslow to examine the industry's response, separate fact from fiction, and explain why following OEM repair procedures is essential for both vehicle safety and professional credibility.
      What You'll Learn The difference between static and dynamic ADAS calibrations, and why confusing the two leads to costly mistakes. Why programming, configuration, initialization, and calibration are separate procedures with different purposes. How fear of losing a sale often outweighs concerns about vehicle safety and liability. The real-world consequences of skipping OEM-required calibration procedures. How a properly calibrated vehicle helped protect Keith's wife and children during a serious highway rollover crash. How elevating the role of theCalibration Specialistreinforces professionalism and builds customer confidence.
      ADAS calibrations are not optional add-ons or revenue generators; they are critical safety procedures designed by vehicle manufacturers to ensure advanced safety systems perform as intended. Professional repair shops protect their customers by following OEM repair information, completing every required calibration, and returning every vehicle to the road safe and ready to perform. Why ADAS Calibrations Are Being Ignored in Auto Repair Shops [THA 484]: https://remarkableresults.biz/remarkable-results-radio-podcast/a484/
      Keith Perkins, Previous episode HERE. L1 Automotive, https://www.l1diagnostics.com/, L1 Automotive Training: https://l1training.com/
      Matt Fanslow, Riverside Automotive, Red Wing, MN, Diagnosing the Aftermarket A to Z Podcast: https://mattfanslow.captivate.fm/
      Thanks to our Partner, NAPA TRACS NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Thanks to our Partner, Today's Class Optimize training with Today's Class: In just 5 minutes daily, boost knowledge retention and improve team performance. Find Today's Class on the web at https://www.todaysclass.com/ Thanks to our Partner, KUKUI Stop juggling multiple marketing tools. KUKUI’s integrated platform delivers 4x better website conversions, automated follow-up, and real-time ROI tracking. Get industry-leading customer support with KUKUI at https://www.kukui.com/ Thanks to our Partner, Pit Crew Loyalty You’re probably tired of chasing new customers who never return. We understand. Pit Crew Loyalty ends the one-and-done cycle, turning first visits into lasting, reliable revenue at https://www.pitcrewloyalty.com/ Connect with the Podcast: Download and Listen on Our Mobile App: https://automotiverepairpodcastnetwork.com/app/ Visit the Website:https://remarkableresults.biz/ Subscribe on YouTube:https://www.youtube.com/carmcapriotto Follow on Facebook:https://www.facebook.com/RemarkableResultsRadioPodcast/ Follow on LinkedIn:https://www.linkedin.com/in/carmcapriotto/ Follow on Instagram:https://www.instagram.com/remarkableresultsradiopodcast/ Join Our Virtual Toastmasters Club:https://remarkableresults.biz/toastmasters Join Our Private Facebook Community:https://www.facebook.com/groups/1734687266778976 Join our Insider List:https://remarkableresults.biz/insider All books mentioned on our podcasts:https://remarkableresults.biz/books Our Classroom page for personal or team learning:https://remarkableresults.biz/classroom Buy Me a Coffee:https://www.buymeacoffee.com/carm Special episode collections:https://remarkableresults.biz/collections
      The Automotive Repair Podcast Network: https://automotiverepairpodcastnetwork.com/ Remarkable Results Radio Podcast with Carm Capriotto: Facilitating Wisdom Through Story Telling and Open Discussion. https://remarkableresults.biz/ Diagnosing the Aftermarket A to Z: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. https://mattfanslow.captivate.fm/ Business by the Numbers: Understand the Numbers of Your Business with CPA Hunt Demarest. https://huntdemarest.captivate.fm/ The Auto Repair Marketing Podcast: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. https://autorepairmarketing.captivate.fm/ The Weekly Blitz: Weekly Inspiration with Business Coach Chris Cotton from AutoFix – Auto Shop Coaching. https://chriscotton.captivate.fm/ Speak Up! Effective Communication: Develop Interpersonal and Professional Communication Skills with Craig O’Neill. https://craigoneill.captivate.fm
          Click to go to the Podcast on Remarkable Results Radio
    • By TradeHop
      Hey all — long-time lurker, first post. I'm building something called TradeHop and want to sanity-check the idea with people who actually run shops before I go further.
       
      The concept: traveling or independent mechanics book your spare bay time by the day instead of you hiring them full-time. You set the price and hours, they book, and you keep the bay filled on slow days instead of empty.
       
      Before I build more, I'm curious: would any of you actually consider doing this, and what would make you say no? Not trying to sell anything here, genuinely want the reality check from people who run shops for a living.
    • By CAautogroup
      Hello all,
       
      I am looking for some feedback for what most shops use to advertise and get the word out about their business. We are currently looking into running promotions online (facebook, twitter, etc) and possibly Yelp ( but have not heard many good things about using their services and that it is somewhat costly). Perhaps craigslist?
       
      We have introduced new signage in our waiting area, put a marquise sign outside, and have started calling past customers for return work.
       
      Any thoughts? We have had a lot of downtime lately... more than usual to be honest.
       
      Thanks in advance for your thoughts and opinions.
       
      Nick.


  • Our Sponsors

×
×
  • Create New...