Quantcast
Jump to content

Recommended Posts

Posted

I can tell you Joe working for Honda for so long that if you use anything but the OEM replacement, they will come back on for cat codes. I am not sure why but I think it has to do with the aftermarket ones not being efficient enough. I don't do a lot of cats here but whenever possible, I do try to sell the oem ones if they aren't too far out of range just for that reason.

  • 2 months later...
Posted

We sell a fair amount of catalytic of catalytic converters. In the past we have not had a real issue. We had 6 failures of replacement cats since fall 2009. Our supplier has told us he is not seeing a lot of failures. He actually recommended a seminar on diagnosing cats (a little insulting). I told him that after the second cat, the car is ok, so why is my shop and not his cat?

 

We don’t replace a cat just because we have a cat code; we go thru the diag procedures to insure that nothing killed the cat. We are now going to the dealer, RELUNTANTLY, to purchase our cats.

 

I know there are many cat companies out there and this may not be a valid question, but has anyone else seen a rise in replacement cat failures?

 

 

I've had allot of luck with the Borla cats, I'm getting them from WorldPac, as well some of the hi-flow magnaflow cats... but as well we're a performance minded shop, although even on everyday drivers we'll try our best to offer something better, or explain its all we can get.

Posted

Over the past 1 1/2 to 2 years we have had a pretty large failure rate with aftermarket cats using 2 different companies. We have now mostly gone with O.E. for most applications or if the customer is really strapped we will offer them and aftermarket unit at their gamble. If the unit fails within our warranty, I will install a O.E. one for the difference in price of the converter and they are responsible for the labor again. ( I will return the aftermarket cat to my supplier to get credit for it) Most times the customers go with OE and have had no issues but now at least it gives them an option. If they are just trying to get thru an emission test and do not plan on keeping the car long (which we all have heard that), they a a less expensive option.

 

That is our 2 cents, Tim

  • 5 months later...
Posted

I only use oe bolt in units. I have told a few customers to go to our one and only exhaust place in town and have seen repeat failures of aftermarket cats. We to properly test. I had one he did come in we tested and said it was bad and I advised they take it back to the previous installer. He said it tested fine there was something else wrong. I re-tested found nothing and called the shop. I went through what we tested and how a cat works and they were still saying it wasnt the cat. I believe they just do not know how to test. They only heat test which is one thing I do not do? How are others testing the cats? I monitor the before and after o2's. If its a pluged cat thats a pressure test. Sorry for the ramble.

Posted

Good information, I am lossing faith in aftermarket cats. WE DO test them right and have no failure with oe Cats, just aftermarket. And, many of the cats that come back were replaced becuase of rust thru, not for an emissions failure or check engine light. But, they return with a check engine light that was not on before.

Im sure you do test them right. Most exhaust shops dont understand it. Plus there sales reps feed them false info. I dont have rust in our area. Cat failure isnt a common issue. But I have seen nothing good about the aftermarket ones. Fodd for thought would be to get an oe from say worldpac? But ive found they dont list the gaskets occasionally :-( I will no longer use an aftermarket cat I dont like any comebacks even for a part failure. I kind of group it with aftermarket mass airflow sensors have you ever been in a bind and tried one? Bad news they are junk. Its like a needle in a hay stack to get a good one. I feel cats are in the same boat.

Posted

What I see is a oe cat failing at say 120 K then the aftermarket failing in the next 6k. I believe its the effiency of the cats. They dont seem to be made to the same standard. I dont think all oe parts are the best in all situations but due to the pattern of failures ive experienced ill never sell another aftermarket cat. It could have been a bad bnunch but it ruined me.

Posted

So far I have had no issues with aftermarket cats, but i am always leery of it. I use Magnaflow and IMCO cats. I get direct fir when I can, but have installed some universals as well. I got a good tip from my exhaust supplier. If the vehicle has a LEV or ULEV emissions tag which ALOT of cars do only use the California cats.

 

IMCO is the parent company of the revamped Cherrybomb. Their pricing on the direct fit and california cats is scarily competitive.

 

Like I stated before I am still leery of the aftermarket cats but so far so good.

 

Food for thought. OEM cats bring upwards of $80 apiece for scrap. Aftermarket cats are virtually worthless.

  • 3 months later...
Posted (edited)

Aftermarket cats have less paladium and platinum in them, they also have different substrate materials to make the lower content of precious metals a more workable solution. They have vastly lower services life due to this.

 

OEM cats in a market that demands 100% emissions conpliance is huge. Also alot of oil companies are adding nitrogen and more ethanol to the fuel. Ethanol leaves a very aggrevating residue lower tempature aftermarket cats may not be capable of burning off.

 

I don't replace many cats. Although I get lots of exhuast repairs lately where cats have been stolen and the customer refuss to replace the catalyst. Thats becomign very prevelant.

 

If you are in a area with lax enforcement you can also buy programming tools to remove the annoying codes if thats what your customers wish.

 

We also work on alot of race cars and street performance mcahicnes so my customer spectrum may widely vary from that of the average auto shop.

Edited by CollinsAutomotive
Posted (edited)

In March at our Car-x trade show I talked to the Walker exhaust people about some of the problems we have had with aftermarket Goerlich/Catco converters. This problem has been most confined to some GMs for us. Here is what he told me. He said that there are certain vehicles that all of the after market converter manufacturers have had problems with. This is because the computers in those cars had a finer tolerance and these after market converters would thus trigger a code. He told me that all of the manufacturers had addressed this problem by coming up with a new design beefer converter loaded with more of the precious stuff and that now they pretty much had this problem licked as long as you go with the new design converters.

 

 

thats very beliveable actually. I remeber about 5 years ago replacement cats were a crap shoot. I don't replace many of them but I did notice less check engine lights on in recent years with replacement cats.

 

There are programming tools which will allow you to change the switching thresholds of the sensors. But it requires a good bit of knowledge to execute and you won't be able to do all cars.

 

chrysler trucks with the 5.2 and 5.9 and even some hmei models had cat efficiency checking that was so lax, you could take the cat off and it would likely not set a light.

Edited by CollinsAutomotive
Posted

We have replaced more catalytic converters in the last 6 weeks than at anytime in our history. Quite a few high end cars have been involved. What is going on? Do you think the extreme heat we have been having is part of the reason?

 

Cat problems on high end cars often end up being the use of low octane fuel in something requiring 91 octane or higher. I've been seeing this more often lately on Audi's quite a bit and a few Mercedes. The key is that the cat is often not bad, just not working. Its clogged up with a velvet fluff of carbon. If you put a good quality high octane fuel in and perform the Italian tune up the cats will get hot enough and blow out most of that carbon. If maintained with good fuel the codes never come back. Sometimes upstream o2s will need replacing as they are also clogged up. If they are bad you'll often see a slow response/aging code also. Bosch, BMW and in some cases VW/Audi recommend replacement of upstream o2s after 100k anyway so its an easy sell and helps fuel economy too in a lot of cases.

 

 

On fitment issues with aftermarket cats, I'm done with Bosal, They're quality has gone in the crapper and they simply don't fit most cars. Hands down the most cat replacements we see are on Subarus. Bosal cats are a nightmare to fit on a subaru and they will always come back even if you get the "premium load" units. Last few units I put in were from CarQuest, I think were Goerlichs. Much better fitments, we'll see if they come back, oldest one is only in a few months or so now.

 

Like others have said, most cat codes do not require cat replacement, when they do though, like others I have not found an after-market solution that I'm satisfied with.

  • 7 months later...
Posted

i didnt see anyone mention this yet.

 

i wonder if the rise in Ethanol content has triggered this (p0420) outbreak, working in retail parts i have seen many more p0420 in the last 18 month than the first 18 i worked there.if i remember correctly Ethanol burns hotter than gas, could that be causing cat temps to be higher and possibly lowering there performance.

 

 

Joe, as we all know in NY rust thru is huge, especially in exhaust parts, i do notice that aftermarket (walker in my case) are built thinner and seem to rust quicker. the only thing i can see that would help is a coat of VHT/header paint to slow the process.

 

the ideal thing would for the OE to go stainless (would raise the cost by a grand or less) and stop the rust all together. same with brake lines.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics



  • Our Sponsors

×
×
  • Create New...