Quantcast
Jump to content


IATN and Identifix hurt Diagnostic skills?


Recommended Posts

Im a newbie so I started after the revolution of the industry. I will say there extremely valuable information available on forums and services such as these. Many times its not just whats wrong it includes information to prevent reoccurrence or discussions that open the door for manufacturer dialog and solutions. These are conversations that would have gone unheard 10-15 years ago. I also see that it can be a tremendous problem if not handled by shop managment. Iatn somewhat governs itself a bit, I feel that post with inadequate test results or the "tell me what it is, I'm to lazy to look " dialog gets less response and a poor score. If the tech cant troubleshoot he or she will provide less than satisfactory results when it comes to fixing it right the first time. A company that would produce independently written troubleshooting charts in checklist form (available from sources like alldata) would give managment some form of verification. If the sheet isn't completed with specs retreived from the diagnosis, the supervisor can look into it. I think if we're going to continue to moving towards information services like this there must be some accountability on the techs part.

After saying all that, services like this will eventually be required. With all the new models and new technology and lower book hours, technician abilities will soon be maxed out Imo.

Sent from my SCH-I605 using Tapatalk 2

 

 

Link to comment
Share on other sites

I got rid of my IATN and went only with Identifix. The best month I spend every month. There is no way to keep up on all the changes and if you have any questions someone a lot of times has already solved the problem. Example, had a GM car with the pass side seat air bag code. A bunch of responses said to check the plug under the seat for something specific. Solved problem. Would have taken me hours to figure that one out. Identifix is one of the first steps in our diagnostic tree and to have access to the actual factory wiring diagrams and factory manuals is worth every penny.

Link to comment
Share on other sites

It should be noted that Identifix started decades ago as a dial-in number on a charge-per-call basis. Then, they slowly moved over to the online arena, using their years of compiled phone call database as a launchpad. They still offer the phone service; I have never used it.

 

Techs have always needed more than what's in their own personal brains. Even the best, most highly capable techs will still be caught saying, "Hold on, let me call my buddy ... he works at the VW dealership" or "Let's call my friend that runs that tranny shop down the road." Those phone calls are an informal version of what Identifix has made a business doing.

 

Does this dumb down the techs? Maybe. However, I would much rather my tech be "dumb" and get a weird wire short solved in ten minutes over an "intelligent" tech that spent four hours chasing wiring diagrams and relays. When your tech is able to do both, you have an all star.

Link to comment
Share on other sites

We currently are signed up for IATN but not Identifix. How different is Identifix compared to IATN?

 

Here is a summary of both:

 

IATN: Great for posting a question and getting quick answers. Not so great for searching for problems that have been solved already.

 

Identifix: Great for searching for already solved issues, with a probability number next to each possible solution. Not so great at looking up a very specific problem that nobody has encountered before. Although, they do offer a help line for this ... I think it's $25 a call.

Link to comment
Share on other sites

I have to disagree with you Wes. I don't think IATN nor Identifix "dumbs" down our techs. In the independent market, techs are expected to understand the systems of multiple cars and mutiple car lines. We have to be the master of everything. I think IATN and Identifix are a wonderful ADDITION, to our already wonderful knowledge and expertise. Where a technician falls short, he has a resource on hand to use for additional diagnostic tree steps. I do feel if you don't know where to even begin with a code, there is an experience/training issue. You should atleast be able to check the basics before checking your resources. Anyone ever had a tech come back after hours and say he found the problem? A blown fuse.........

Link to comment
Share on other sites

I have to disagree with you Wes. I don't think IATN nor Identifix "dumbs" down our techs.

 

Sorry, I did not explain this very well. A sharp tech will make GREAT use out of IATN / Identifix and use it to expand on his/her skills and knowledge. A lazier tech will simply use these systems as a crutch and never really critically think through the issue. Did IATN / Identifix make the lazy? No, it is simply a tool.

Link to comment
Share on other sites

 

Sorry, I did not explain this very well. A sharp tech will make GREAT use out of IATN / Identifix and use it to expand on his/her skills and knowledge. A lazier tech will simply use these systems as a crutch and never really critically think through the issue. Did IATN / Identifix make the lazy? No, it is simply a tool.

 

I can agree to that and it's already difficult enough to find expert technicians.

Link to comment
Share on other sites

  • 7 months later...

I use both, identifix is used on every diagnostic job we do. It fills us in on the whole picture and points us in the right direction. It's worth the money. Iatn is the backup plan, not a very good one. If I ever get stuck and post on there I get responses like "do a voltage drop test" or "use a factory part only", and some criticism, but no real useful info. Identifix can lend itself to ignoring the service manual which is a lazy bad habit that can lead to empty wallet syndrome. Reason being if 200 people had the same problem and fixed it the same way it makes sense in a time restricted environment to try that before going through all the tests. Works until it doesn't. We don't charge for wrong guesses so I pay the price for the OOPS moments. Mostly I use my brain.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Have you checked out Joe's Latest Blog?

         5 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Changing The Industry
      The Basics of Owning An Auto Repair Shop - Balancing GP per Hour and Productivity
    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By carmcapriotto
      Thank you to our friends at RepairPal for providing you this episode. As shop owners we were part of RepairPal’s Certified network and you can learn more at RepairPal.com/shops.
      Show Notes
      Reasons Google will suspend your GBP Adding Keywords to Your Business Name Using PO boxes or virtual office addresses Using your home address for a service area business - mobile mechanics Making major changes to your information - name, address, phone number Adding Reviews - Talk about RV Masters Recent experience Spam Reviews Two businesses sharing an address - same with phone number A competitor reported you  Dandy Review Removal: Negative review removal using AI They had to rebrand from ReviewVio because of all the negative reviews and complaints that they received. They over charge and under deliver. It is a 12 month contract - not monthly Writer’s Hand: WriterHand.com's Review Generator AI employs state-of-the-art natural language processing algorithms to produce high-quality reviews in a matter of seconds. The tool is designed to cater to the needs of both individual writers and businesses seeking to enhance their online presence. By simply inputting a few key details about a product, service, or experience, users can obtain well-crafted reviews that reflect a genuine customer's perspective. Embed Social: Use AI tools to help you collect more reviews, reply to reviews faster and make your reviews widget designs. New AI Optimization services: Boost Ninja:  Speak on Accurate Automotive GBP Listing being suspended after adding this company to their listing - Supposed to be a Google Maps ranking system by boosting local rankings by targeting top keywords and AI Optimization to your Google listing Problem is when you talk to client’s who have hired companies like this and ask what they are actually doing - the answer is the same: “I have know idea”  
      How To Get In Touch
       
      Group - Auto Repair Marketing Mastermind
      Website - shopmarketingpros.com 
      Facebook - facebook.com/shopmarketingpros 
      Get the Book - shopmarketingpros.com/book
      Instagram - @shopmarketingpros 
      Questions/Ideas - [email protected]
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors



×
×
  • Create New...