Quantcast
Jump to content


Zombie Cars - - - They're out there, wandering around looking for brains


Gonzo

Recommended Posts

Zombie Cars

“Brains, Brains, we need Brains!”

 

Zombie cars? What’s a zombie car? Way back when we used points and condensers and later the basic electronic ignition systems cars didn’t need brains (ECM – Electronic Control Module), but that all changed in the mid 70’s on some imports and pretty much on everything else by the time the 80’s came around. Some of these brains were only cursory and didn’t actually control the car, but merely watched for emission issues, while others played a major role in the actual ignition spark or fuel delivery systems.

 

Most of the engines in those early years of electronics still used the same basic distributor setups (with a few exceptions) as their earlier counterparts that used the old tried and true points and condenser type of ignition systems. On those older models it was rather easy to slap a different distributor in it or change it over to electronic ignition, (which worked quite well by the way). These days, well, it’s not that easy. These computer systems have become so involved into the engine controls and other related systems that it’s nearly impossible to bypass the fuel or ignition systems. However, there are still a lot of people out there with low mileage cars from that early era that have kept them parked alongside of the garage or hung on to them for some sentimental reason. Some (very few) are in great shape, others… well, they look like zombies already.

 

What makes them zombies? The brain… the brain… they need brains! Just this past week I had several of these faded paint monstrosities lined up in the parking lot. (They never come alone… always in a pack.) For starters an old dilapidated 1986 Dodge pickup with a slant six. This old rusted, tilting to one side relic had been at another shop for a tune-up but, as the story was told to me by the owner, the other shop tried to start it when a fuel line ruptured and caught the old truck on fire. Luckily, they managed to get it out, but the damage was already done. The main harness from the firewall to the distributor, coil, charging system, blower motor, oil sending unit, temp. sender, and the starter wiring were completely melted into an unrecognizable mass of plastic and copper. It was my job to bring this dilapidated hulk back to life. The problem was the spark control computer was shorted out and unusable. Worse yet, the brain was discontinued eons ago and no replacement parts were available. This zombie needs a brain, and there doesn’t seem to be an easy way to get one. Seemed to me, a better idea was to do away with the electronic brain and refit the old slant six with a simpler ignition system than what it originally had. A lobototomy if you will. (Dr. Frankenstein would be envious.)

 

Then there’s this 2002 Mustang that needs a new BCM (Body Control Module). Call the dealer, call the parts warehouse, call everybody! Anybody! Is there a brain for this car? Nope, discontinued. Seems this BCM is a rather rare brain out there in zombie land. At the same time this was going on in comes a 1982 Ford Bronco with the original Variable Venturi carburetor still on it. Ok, not a brain, but just as bad. Trying to find a suitable replacement these days is a challenge. Ten or twenty years ago this would be no problem finding parts or conversion kits for it, but not today. This is going to take a bit of time to get these zombies back on the road.

 

This trend of bringing back the dead looks like it’s only going to continue with the economy in the shape it’s in. In some ways, I believe the manufacturers have thought this out long before there was a potential of these cars becoming zombies. Even though the car might physically still be in fair shape the components themselves are not readily available to bring these rolling dead back to life.

In my youth it was nothing for me and a few friends to grab an old car out of a junk yard, throw a few shots of gas down the carburetor, add a few wires and a fresh battery and fire that old thing up. The rust would fly, the engine would clatter, and the exhaust would roar. Those days are long gone now. Cars could be dead for a very long time in that salvage yard or behind the shed and easily brought back to life in those days. Nowadays, the engine and other mechanicals hold up a lot longer than years ago. Even the body and interior can hold up pretty good, but the electronics are not as friendly with the ravages of time, temperature, and the weather.

 

These zombies seem to be coming out of hiding more often than ever before. Reviving some of these early electronic zombies may happen, but on the other hand, it may be a futile effort. The truth of the matter is… these resurrections are not as easy to do as it was so many years ago. There are countless problems that have to be overcome to bring some of these rusted heaps back amongst the living, especially if you’re in area that requires emission testing. Just trying to bypass some of those early electronic brains when a replacement part can’t be found can be a real challenge. Some never make it and eventually die from the lack of a brain, while others wander aimlessly from shop to shop still searching for their elusive electronic gray matter.

 

Even after you manage to find a brain for these living dead vehicles it’s likely something else is going to go wrong. After being cast aside for so long all the hoses, belts, and gaskets have dried up. Something will or is about to fall off all by itself. Just as soon as one of these zombie mobiles makes an attempt to join the living something will undoubtedly come tumbling to the shop floor. Whether it’s coolant, oil, a belt, or a pressure hose off of the power steering, something is not going to stay in place. Just like in every zombie movie I’ve ever watched, one of them always has an arm or leg falling off. It sure seems that these zombie cars follow right along with that same affliction.

It’s safe to say, these relics of the early electronic era of the automotive world are in some respects the car equivalent to a zombie, half dead, half alive…and in search of a brain they may never find. So don’t be surprised if you’re at the next traffic light when an old faded-rusty-dented car with a shattered windshield, screeching brakes, and plumes of smoke that seem to follow it no matter where it goes, comes to a stop next to you. It’s just another car beginning its transformation into a “ZOMBIE CAR”.

 

 


View full article

Link to comment
Share on other sites

air filtration

What a fun article, very enjoyable. One question; How many techs these days even know what a variable venturi carb is? When I worked for Ford in the 70s, I remember going to a training course on those VV carbs, not fun.

I have no idea what it is.

Link to comment
Share on other sites

Told you Gonzo... many techs (and some shop owners) probably never heard or saw a Ford/Lincoln Variable Venturi Carburetor.No

Now I know we're both getting old Joe. ROFL

Link to comment
Share on other sites

The story reminds me of the term "Frankenstein cars" Cars fixed or built from peices. How about a story on that Gonzo?

Cool idea, I'll work on that one.

Link to comment
Share on other sites

  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By mikezat
      Hi! I got a bunch of engine and cabin filters - leftovers from my store. What's the best way to get rid off the inventory? eBay sales are slow and not an option due to the time it takes to list a filter and due to expensive cost of shipping.
      Many thanks in advance,
      Mike

    • By carmcapriotto
      Thanks to our Partners, NAPA TRACS, AutoFix Auto Shop Coaching, and Today's Class Our panel discusses and debunks car maintenance myths from an online article titled "15 Car Maintenance Rip-Offs You Should Avoid." They cover topics such as engine flushes, air filter replacements, fuel additives, tire shine, headlight cleaning kits, extended warranties, coolant flushes, oil additives, oil enhancers, undercoating, custom exhaust systems, dealership oil changes, and professional detailing. Matt Fanslow, Riverside Automotive, Red Wing, MN, Diagnosing the Aftermarket A to Z Podcast Justin Morgan LMV Bavarian Technical Support and Trainer, ASE-Wave Technical Ambassador. Justin’s Previous Episode HERE. Bryan Pollock, Willco Auto Care, Sanborn, NY, and Lockport, NY Show Notes
      Engine Flushes (00:04:12) Debunking the necessity of engine flushes for well-maintained vehicles and the importance of following manufacturer's guidelines. Air Filter Replacements (00:09:50) Discussion on the necessity of replacing air filters at every oil change and the impact of environmental factors on air filter maintenance. Air Filter Size and Replacement (00:15:25) Exploring the impact of modern engine technology on air filter size and the need for evidence-based professional inspection for filter replacement. Cabin Air Filters (00:17:01) Discussion on the condition of cabin air filters and the impact of leaves and bugs on air quality. Airflow Issues (00:18:30) Addressing airflow problems caused by neglected cabin air filters and the potential damage to blower motors. Windshield Wiper Fluid (00:20:00) Debunking the effectiveness of costly windshield wiper fluid and discussing the difference in quality and impact on visibility. Octane Boosters and Fuel Additives (00:24:33) Debating the use and effectiveness of octane boosters and fuel system additives in modern vehicles. Tire Shine and Nitrogen Filling (00:29:48) Discussion on the impact of tire shine and the benefits of filling tires with nitrogen. Headlight Cleaning Kits (00:31:13) Debunking the effectiveness of expensive headlight cleaning kits and discussing alternative DIY solutions using household items. Restoring Headlights (00:33:01) Discussion on the process of restoring headlights and the potential cost-prohibitive nature of the restoration. Extended Warranties (00:38:06) Debunking the effectiveness of aftermarket extended warranties, with insights on their limitations and coverage issues. Redundant Coolant Flushes (00:43:15) Discussion on the necessity of coolant flushes, signs of coolant issues, and the importance of proper maintenance. Oil Additives for Engine Safeguard (00:47:44) Contradictory information on oil additives and frequent oil changes, with a focus on the composition of oil and the need for thorough upkeep. Oil Enhancers (00:49:17) Discussion on the use of oil enhancers for cold starts and their conditional application. Undercoating (00:49:41) Debate on the necessity of undercoating for modern vehicles and its effectiveness in preventing rust. Custom Exhaust System (00:54:33) Debunking the performance gains of installing a custom exhaust system on ordinary vehicles. Dealership Oil Changes (00:56:19) Comparison of the cost and quality of oil changes at dealerships versus local mechanics or aftermarket repair facilities. Professional Detailing (00:59:55) Debate on the cost and benefits of professional detailing versus DIY cleaning with quality supplies. Misleading Presentation (01:01:48) Critique of the 15 car maintenance rip-offs presentation, discussing the lack of relevance and stereotypes in the content. The stereotype of being ripped off (01:05:06) Discussion about the stereotype of being ripped off and its impact on the automotive industry. Consulting and expert articles (01:05:59) Debunking consulting and expert articles in the automotive industry and their use of clickbait and buzzwords. Educating clients on vehicle maintenance (01:07:30) Importance of educating clients on vehicle maintenance and the need for evidence-based decision-making. Importance of ADAS calibration (01:12:16) Discussion on the importance of ADAS calibration and its impact on vehicle safety and performance. Potential risks of skipping calibration (01:15:28) Exploring the potential risks and consequences of skipping ADAS calibration in vehicle maintenance. Legal implications of skipping calibration (01:17:32) The legal implications and potential consequences of skipping calibration procedures in the automotive industry. Thanks to our Partner, NAPA TRACS NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Thanks to our Partner, Auto-Fix Auto Shop Coaching Proven Auto Shop Coaching with Results. Over 61 Million in ROI with an Average ROI of 9x. Find Coach Chris Cotton at AutoFix Auto Shop Coaching on the Web at https://autoshopcoaching.com/ Thanks to our Partner, Today's Class Optimize training with Today's Class: In just 5 minutes daily, boost knowledge retention and improve team performance. Find Today's Class on the web at https://www.todaysclass.com/ Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on X (Twitter): https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections                                  
      Click to go to the Podcast on Remarkable Results Radio
    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By carmcapriotto
      Matt Fanslow explores the complexities of electricity in automotive diagnostics. He breaks down fundamental concepts of volts, amps, resistance, and Ohm's law, using practical examples to clarify their roles in vehicle electrical systems.
      Show Notes
      Challenges of Explaining Electricity (00:01:15)  Fundamental Aspects of Electricity (00:02:42)  NAPA Auto Tech Training (00:18:20) Understanding Voltmeter Readings (00:19:21)  Ground Reference and Voltage Drop (00:20:29)  Effect of Resistance on Voltage (00:22:44)  Series Circuit and Voltage Split (00:29:17)  Verification of Electrical Issues (00:32:29)  Fuse Block and Voltage Verification (00:34:44)   
      Voltage Drop Testing (00:34:55)
       
      Thanks to our Partner, NAPA Autotech napaautotech.com
      Email Matt: [email protected]
      Diagnosing the Aftermarket A - Z YouTube Channel HERE
      Aftermarket Radio Network: https://aftermarketradionetwork.com/
       
      Click to go to the Podcast on Remarkable Results Radio
    • By carmcapriotto
      Mike Ragsdale is the founder of the 30a Company, and he has an incredible story of being called out by his kids when they got tired of hearing him talk about his dream life without ever pursuing it. This is an incredibly inspiring episode that may result in you exploring how you can create a life you don’t need to escape from.
      Thank you to RepairPal for sponsoring The Auto Repair Marketing Podcast. Learn more about RepairPal at https://repairpal.com/shops
      How To Get In Touch
      Group - Auto Repair Marketing Mastermind
      Website - shopmarketingpros.com 
      Facebook - facebook.com/shopmarketingpros 
      Get the Book - shopmarketingpros.com/book
      Instagram - @shopmarketingpros 
      Questions/Ideas - [email protected] 
       
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors



×
×
  • Create New...