Quantcast
Jump to content

One More Busted Knuckle - - - Who hasn't skinned a knuckle or whacked a finger, I know I have!


Recommended Posts

Posted

One More Busted Knuckle

 

 

It's the grease, the grime, the clank of a loose rod bearing, or the snap of a fuse that is familiar to anyone who has ever worked on cars. But, along with the noises and smells of the business there are the scrapes and bruises. Working with machinery, moving parts, and numerous sharp objects there's bound to be a few personal injuries involved. Sometimes I can go an entire week without cutting myself or jamming a finger, but then there are those days… the ones where I have to make a mad dash for the First Aid kit. It just adds to the challenges of the job.

 

 

Have you ever been complacent while working on a car? You know... just lost your concentration for a moment and did something stupid? I know I have. Like the time I hit the trigger on my new high torque air ratchet with the wrong size socket on it. As the ratchet spun, it took me for an unsuspected ride as it slammed up against the car's engine with a couple of my fingers jammed in between. Man, did that hurt! Good thing for rubber gloves, especially the black neoprene ones. (They don't show blood stains as well, and they tend to hold everything together long enough for you to find the First Aid kit and check for damage.)

 

 

Like a lot of technicians I've got scars, a couple of broken fingers, and a few swollen joints from working on cars all these years. The older I get the more war wounds I seem to collect. "With age comes wisdom". I sometimes have my doubts about that. I sure feel pretty stupid when I get that next bruised or busted knuckle. Age sure doesn't help with the eye sight, or the knees, oh and don't forget about that aching back! Let's face it, working on cars and trucks is a physically demanding job, as well as a mental workout.

 

 

I can remember a time back in my youth, when I would bench press a tranny up into the car while lying on a dirt floor. I don't think I'll try that these days. I've grown out of that macho style of auto repair. You know, always trying to prove I can tackle a big job by myself. (Hint,hint… for you younger techs) I'm much older now. Proving my testosterone level by doing some Herculean feat, which only ends up with another scar for my efforts, is no way to end the day. Sure wish I would have understood that back then, might have saved me from a few bumps and bruises. You could say; "Chalk it up to experience" or "Been there-done that-Know better now", kind of thinking.

 

 

With blisters, sores, aching muscles,dirt under the finger nails, and the ever present grease stains deep in the grooves of my palms, there's no denying what I do for a living.. Yep, that's right… I'm a mechanic. Those bumps and bruises are all part of the job, even though I don't remember anyone I ever trained with mentioning that. (Should've been a course in tech school on proper bandage installation and application; after what I've been through, I could ace that class.) Like a lot of techs, I only get paid for what I accomplish. Even if this means putting on an extra bandage, and if capable...get back to work.

 

 

On one particular day I was changing the U-joints on a truck. The customer had dropped it off early that morning, and I said I could have it done by lunchtime. The joints weren't that hard to change, but getting the drive shaft off was. Three of the four rear yoke bolts came off with no problem, but the fourth one... I wasn't so lucky. The wrench slipped off, and with the force I had on the bolt my whole arm shot skyward. A sliver of MIG welding wire was still on the joint where the rear yoke housing is welded to the actual drive shaft pipe fromthe factory. This made for a perfect slice and dice on my forearm as it passed by.

 

 

By the time the customer picked the truck up that afternoon I had most of my forearm wrapped up. "What ya do to that arm?" he asked.

 

I told him how it happened in all the gory details. I'd like to say he was concerned. He was… just not with my arm. Oh heck no... He was more concerned with his truck. "So you still got the U-joints changed?" he said with a questioning gesture. Yea, thanks for caring, Mr. Customer… I appreciate your thoughts and concerns. Trucks fine, U-joints are fine, I'm fine… life goes on….

 

 

Ok, it wasn't that big of a deal...minor cut... no biggie. (My wife just rolls her eyes when I come home with a new bandage on. I think she enjoys tormenting me, while she cleans up my newest altercation with an inanimate object. Gee… Lucky me....). The customer wanted to make sure I removed that hunk of MIG wire, so that no one else would get hurt in the future. Oh don't worry, I did, and I'll have to admit, I removed that little piece of wire as if I had a personal vendetta against it ... Yea, it ain't going to do that to anyone else... EVER again!

 

 

Outside the daily workings of the shop I'm asked to speak at different functions, or invited to some event where I'll be shaking a few hands. I used to worry about the roughness of my hands, especially when I was in a room of businessmen and women who had no concept of manual labor work in their daily vocations. It was a concern of mine, andat times maybe even a bit embarrassing. But, you know, I've come to realize, I should be proud of what I do, and those scars and callouses I've collected throughout my working years are like my own personal business card. It's who I am... it's what I am...it's the way I am… a mechanic. I'm proud of what I do… we all should be proud of what we do. There aren't a lotof people who can do this job. Putting your arm into a blind or tight spot,while trying to turn a bolt or nut with nothing more than their fingertips, isn't for everyone. As a technician you do it, and don't even think about that sharp jagged piece of metal you're wedged up against... you just do it anyway.

 

 

Even with a few extra scrapes and scars I'm still going back to this job tomorrow. I don't plan on gouging a test light into my hand while reaching down into an engine bay, but you know… it'll happen... maybe not today, but it will.

 

 

Best of luck to all the ratchet spinnin', wrench turnin', hardworking techs out there. Stay safe... work smart... and keep the First Aid kit well stocked.

 

There's always tomorrow, and tomorrow is just one more busted knuckle away.

 


View full article

Posted (edited)

Liked the use of "mechanic" through out the story. You changed it to "tech" in the next to last sentence. When "tech" started to be used in place of mechanic I just couldn't hang on to it. I have used it but not often. The public might like to hear Tech but as you said we are mechanics. At least us with many years in this business.

The article started having me count my battle wounds... ugh...

Edited by Spence
Posted

thanks for all the comments, I can see we're all members of the Johnson and Johnson fan club. Thanx again for all your thoughts... (I'm writing this with a bum finger at the moment... geez, do ya think I had an inspiration for this article... yep.. yep I did. LOL)

Posted

Ever since we started to issue Sponge Bob Square Pants band aids our cuts/scrapes have gone down 70%. B)

 

We'd be looking forward to putting them bad boys on a cut! Gotta get me some of them. biggrin.gif

Posted

We've had some construction guys at our house for the past couple of days installing new windows. One of the guys cut his hand on some broken glass. As my wife was putting on a few bandages she handed him this article... LOL... he got a laugh out of it and totally could see how this relates to any type of work. Made my day... LOL

  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics

    • By Changing The Industry
      Episode 271 - Training New Techs & Building a Lasting Automotive Business With Charles Mitchell
    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Changing The Industry
      Episode 269 - Lessons Learned From Custom Car Builds and Business Ownership With Sunny Massera
    • By Brian_Urlage
      Something I see in almost every independent shop I've worked with: a car pulls in Monday morning, and it doesn't get touched until Wednesday afternoon. Not because the tech was busy — because nobody had a clear handoff system.
      After 20+ years working with shop operations, here are the five things I've found that cause the most dead time:
      1. The verbal handoff
      "Yeah, I told Mike about that car." Mike doesn't remember — he was pulling a transmission. Written workflow tickets that travel with the vehicle eliminate this problem overnight.
      2. No visual status board
      When you can't see at a glance where every car sits in the workflow, things fall through cracks. Doesn't need to be fancy. Even a whiteboard with columns (Waiting → Diagnosed → Approved → In Progress → Done → Called) changes everything.
      3. Approvals sitting in voicemail purgatory
      The car's diagnosed, estimate's written, tech is standing there... and the customer hasn't called back. Who owns that follow-up? If nobody does, that car sits. Set a time-based escalation: 2 hours no response → service advisor calls again. 4 hours → call AND text. Make it a written procedure, not a judgment call.
      4. Parts delays nobody communicated
      Car was promised Wednesday. Part won't arrive until Friday. Nobody told the customer. Now you've got an unhappy customer AND a bay tied up. A simple parts-arrival check at open every morning prevents this entirely.
      5. No end-of-day workflow sweep
      30 minutes before closing, walk every car in the lot. What's waiting on the customer? What can be staged in a designated waiting area? What's ready to go and needs a final call? This one habit alone cuts average days-in-shop significantly.
      If any of this sounds familiar, I put together a free Operations Assessment Checklist that walks through these and a few other common bottlenecks — grab it at gettractionops.com/checklist. No email required, just download and use it.
      Curious what systems others here have put in place — especially around the approval/follow-up piece. That one seems to be the biggest variable shop to shop.
    • By carmcapriotto
      Thanks to our Partners, NAPA TRACS, Today's Class, KUKUI, and Pit Crew Loyalty Watch Full Video Episode In this episode of the Town Hall Academy, host Carm Capriotto is joined by Matt Wagg and Shiju Thomas to tackle a common challenge in the automotive repair industry: getting “unstuck.” The conversation focuses on breaking through growth plateaus by sharpening leadership, building a meaningful culture, and committing to continuous employee development.
      Leadership & Accountability
      Growth stalls when tenure is valued over performance Not every team member will grow with the business Leaders must make tough calls and avoid carrying “dead weight.” Practice radical candor: honest conversations build trust Self-awareness is critical; seek outside accountability (coaches/peers)
      Culture & Development
      Culture must be intentional and tangible, not just social events Built through aligned hiring and shared values Reinforced with tools like assessments, training, and team learning Continuous education prepares teams for evolving vehicle technology A learning culture attracts higher-level talent
      Embracing Being “Stuck”
      Feeling stuck often signals ambition and growth Indicates you’re pushing into new challenges Clear personal and business goals provide direction Without clarity, the business risks drifting without purpose
      Ultimately, getting unstuck isn’t about quick fixes; it’s about honest reflection, intentional leadership, and a commitment to growth. The shops that move forward are led by people willing to have the hard conversations, invest in their teams, and take ownership of what needs to change. If you’re feeling stuck, take it as a signal, not a setback, and use it as the catalyst to refocus, realign, and lead your business to the next level. Matt Wagg, Accelerated Diagnostics and Automotive, Bennington, NE. Matt’s previous episodes HERE Shiju Thomas, Hotchkiss Auto Repair, Denver, CO. Shiju's previous episodes HERE Thanks to our Partner, NAPA TRACS NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Thanks to our Partner, Today's Class Optimize training with Today's Class: In just 5 minutes daily, boost knowledge retention and improve team performance. Find Today's Class on the web at https://www.todaysclass.com/ Thanks to our Partner, KUKUI Stop juggling multiple marketing tools. KUKUI’s integrated platform delivers 4x better website conversions, automated follow-up, and real-time ROI tracking. Get industry-leading customer support with KUKUI at https://www.kukui.com/ Thanks to our Partner, Pit Crew Loyalty You’re probably tired of chasing new customers who never return. We understand. Pit Crew Loyalty ends the one-and-done cycle, turning first visits into lasting, reliable revenue at https://www.pitcrewloyalty.com/ Connect with the Podcast: - Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ - Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters - Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 - Subscribe on YouTube: https://www.youtube.com/carmcapriotto - Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ - Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ - Visit the Website: https://remarkableresults.biz/ - Join our Insider List: https://remarkableresults.biz/insider - All books mentioned on our podcasts: https://remarkableresults.biz/books - Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom - Buy Me a Coffee: https://www.buymeacoffee.com/carm - Special episode collections: https://remarkableresults.biz/collections - The Automotive Repair Podcast Network: https://automotiverepairpodcastnetwork.com/ - Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion. https://remarkableresults.biz/ - Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. https://mattfanslow.captivate.fm/ - Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. https://huntdemarest.captivate.fm/ - The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. https://autorepairmarketing.captivate.fm/ - The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. https://chriscotton.captivate.fm/ - Speak Up! Effective Communication with Craig O'Neill: Develop Interpersonal and Professional Communication Skills when Speaking to Audiences of Any Size. https://craigoneill.captivate.fm     Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors

×
×
  • Create New...