Quantcast
Jump to content


North vs. South - A battle not between the states but a battle it is


Gonzo

Recommended Posts

North vs. South

 

There’s a battle that’s been raging in the auto repair business for as long as I can remember. There’s a definite line that separates the north and south, and it’s not the Mason/Dixon line. It’s known as the “Rust Belt”.

 

If you’re not familiar with it, well then, you must be from the far south. Any mechanic on the northern side of the rust belt knows it all too well. Rust seems to get into every area of the car, but it’s more evident underneath the car where it seldom gets washed off. Especially in an area that uses a lot of sand and salt, or a mixture containing salts and a chemical agent. Years ago in a lot of areas, they’ve outlawed studded tires because of the damage they could do to the roads, so a lot of those municipalities opted for these chemical concoctions instead. There’s less road damage from tire studs, but pot holes and car exteriors haven’t fared as well.

 

Rusty undercarriage parts carry their own rules for repair. Such as a rusted away tie rod nut that needs removed. Rather than even trying to put a socket on one of those half deteriorated nuts, the best thing to do is holler, “Get the gas axe!” (Cutting torch), and the more winters a car survived or the further north you go, the more the ol’ gas axe is as essential as a good set of sockets.

Even though trained mechanics are the same no matter where you go, there are still differences between what a mechanic north of the rust belt has to deal with vs. someone on the south side of it. The biggest difference is definitely having to deal with the rust. Rust and more rust.

Once in a while I’ll get one of those northern cars that has crossed the line and is now transplanted into my neck of the woods. They are easy to spot; just put it up on the lift and you’ll know. Even though the engine compartment isn’t immune from the effects of salt degradation, it’s a lot more noticeable under the car. The amount of rusted, flaking metal, and deteriorating nuts and bolts under some of these cars is unbelievable, and some of these rusty rides aren’t that old. (At least I haven’t run across a pickup truck where the frame has rotted off between the bed and the cab to the point it separates in half when you put them on the lift! I’ve seen a few photos of these rusted through trucks. Yikes!)

Since I grew up north, but moved below the rust belt line years ago, I’ve seen a lot of inventive ways people have come up with to subdue the ever encroaching rust Mother Nature has so graciously handed us. Undercoating, zinc plates, and some crazy electrical unit that is supposed to prevent rust from degrading the metal (Good luck with that one.), just to name a few. As a matter of fact some manufacturers actually offer lifetime warranties against rust on their vehicles that are equipped with their own patented rust prevention systems. Undercoating is probably the most popular. Works great, to a point. That is, until you need to replace a brake line or pull a fuel tank and that stuff is coating all the straps and bolts. (Been there-done that.)

 

There are also many other components affected by the long cold winters and road conditions. From suspension parts to the engine, nothing is immune to Mother Nature. Back in the days when most cars were still using a single grade motor oil (I know… age check here) and you had a really cold night the engine oil would turn as thick as molasses. Needless to say, a good strong battery and a sluggish turning engine… something had to give. Most of the time the weak point was the starter bendix driver, other times the bendix was fine but the starter housing would snap. But, even in the south I’ve seen the same thing, and I have even had a few ABS reluctors get iced over and split off of a CV shaft.

The further south of the rust belt you go the less snow, but more freezing rain and ice. It can coat everything with a thin layer of unyielding and impregnable ice. You can’t open a door or the hood, and whatever you do, don’t turn on the wipers. It seems like every year somebody will drop their car off with one wiper arm flopping around, while the other one scrapes across the windshield.

I can’t say for sure, but I’d bet there are certain diagnostic differences when it comes to certain situations between the north and south. These changes to certain diagnostic procedures may have something to do with all the rust or the extreme cold temps. But, in the south there are just as many different diagnostic adventures as well. The biggest issue is the heat. The never ending, over 100 degree days that just destroy rubber, glass, interiors, electrical systems, radiators, etc…. Some days even in the shade it stays well over a 100. No need in worrying about freeze plugs popping out, but you might need to worry about the dash pad warping so bad it looks like ocean waves. Just try keeping an aging car’s A/C system working in 105 degree weather while in traffic, without the engine overheating. And, did I mention… it’s hot! It’s really hot! It’s not uncommon to get into a car that’s been waiting in front of the shop to reach 145 degrees or more inside it.

 

Up north the winter season is several months long, and seems to linger on longer and longer the more you anticipate its end. In the south the winters aren’t nearly as long, but can be just as severe. Sure, they’ll still throw the sand and salt out below the rust belt, and yes they’ll plow the main roads. However, not all roads are plowed and not every municipality in the south has the same kind of inventory of equipment of a equivalent sized town would have up north. So, in most cases if there is even a warning of a potential accumulation of any amount of snow (large or small) all the schools close, businesses shut down, and all the groceries stores shelves will be cleared. You’d think it was an invasion or something if you didn’t know any better.

 

 

Between the snow, ice, hot temps, pot holes, rain, lightning, floods, and everything else you can think of that Mother Nature can throw at ya, repair shops have their hands full. Battling Mother Nature on either side of the rust belt has always been a never ending job. Mechanics just have to do certain things a bit differently depending on which side of the rust belt you’re on. It’s a long battle, and I don’t think Mother Nature is going to let up any time soon.


View full article

  • Like 1
Link to comment
Share on other sites

Being from the heart of the Old Confederate South, I was just talking with our master tech about rust and the north. How does flat rate even work up there? Do y'all multiply it by 2x for every suspension job?

 

Say what you will about the heat in the south, I'll take southern heat and sweat over snow and salt any day!!

  • Like 2
Link to comment
Share on other sites

Flat rate up here makes real men out of technicians! I've been in the rust belt my whole life, there's no surprises. Any exhaust work means all new hardware, alignments require the torch, my CP717 air chisel is used every day without exception. The junkyard is full of 2005 model year cars that rotted out. 10 years is all a car can take up here if not washed off religiously. I buy subframes from southern junkyards, they can't give them away locally. We probably change 2 a month.

Edited by alfredauto
  • Like 3
Link to comment
Share on other sites

I get the rust here also. The "snowbirds" leave the cars parked under the carport 4 months. They live in the condos on the beach. Come Oct-Nov I will see them with rotted brake lines, seized calipers, etc. All from the salt spray from the ocean.

Jeff, I purposely left out salt spray for a future article on coastal mechanic work.... So your in on the next article. ROFL.

  • Like 1
Link to comment
Share on other sites

Flat rate up here makes real men out of technicians! I've been in the rust belt my whole life, there's no surprises. Any exhaust work means all new hardware, alignments require the torch, my CP717 air chisel is used every day without exception. The junkyard is full of 2005 model year cars that rotted out. 10 years is all a car can take up here if not washed off religiously. I buy subframes from southern junkyards, they can't give them away locally. We probably change 2 a month.

I forgot all about how much time is spent with the old air chisel. A 2005 down here is an average car, and I'm still getting models from the 90's coming in the shop. There is definitely a difference from the north to the south.

Link to comment
Share on other sites

Being from the heart of the Old Confederate South, I was just talking with our master tech about rust and the north. How does flat rate even work up there? Do y'all multiply it by 2x for every suspension job?

 

Say what you will about the heat in the south, I'll take southern heat and sweat over snow and salt any day!!

When doing a job that will require tackling rust, we add labor to the job. An explanation is given to the owner that time was added due to the age of their car and the amount of rust on the parts; parts that are seized are shown to the customer.

Link to comment
Share on other sites

When doing a job that will require tackling rust, we add labor to the job. An explanation is given to the owner that time was added due to the age of their car and the amount of rust on the parts; parts that are seized are shown to the customer.

Being from the heart of the Old Confederate South, I was just talking with our master tech about rust and the north. How does flat rate even work up there? Do y'all multiply it by 2x for every suspension job?

 

Say what you will about the heat in the south, I'll take southern heat and sweat over snow and salt any day!!

I just priced a subaru rear wheel bearing and just added 2 hours and explained there's a good chance we'll need bolts etc

 

Sent from my SM-N910V using Tapatalk

Link to comment
Share on other sites

An average car here in my area of Oklahoma ranges from new to 30 years old. Heat fades the paint right down bare metal, but very little rust. However, the older the car the more home-grown repairs I run up against. Lots of melted connections, overheated modules, etc... the big issue is people who have a 20 year old relic with module driven lighting, PCM's or A/C controls that fail... can't understand why they can't find parts... dah....it's 20 years old. The car may look new...but it ain't new. LOL.

Link to comment
Share on other sites

  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By autorepairuniversity
      WOW. I'm finally launching my "winter project". I have created a fully online auto repair training course. I (as a shop owner) was amazed at the lack of training options that my employees could take while working full time. The course lays out the "basics" that I found myself teaching these guys every time I had a new hire with little experience. If you know anyone who could benefit from this, boy would I appreciate you sharing this! Or, if you as a shop need some training for new employees, maybe this could help you. I'm not trying to use this forum as a "sales platform", but I am very excited to see what hapens with this idea. Again, any help / feedback would be greatly appreciated. You guys are awesome to listen to! Here is the link: www.autorepairuniversity.com
       
       
      Sent from my SM-G930P using Tapatalk
       
       
    • By Changing The Industry
      Reacting To "Silverstein: Business as Usual Must Die"
    • By carmcapriotto
      This week, Jamie Hasty from Southeastern Employer Services Corporation (SESCO) joins Hunt to discuss HR and employment law topics for auto repair shop owners. Jamie provides expert advice on managing overtime, understanding exemptions, and maintaining compliance with labor laws. This conversation is essential for any auto repair business looking to safeguard against legal pitfalls and ensure proper payroll management. It includes:
      Important discussions on managing overtime and understanding exemptions. Practical advice on maintaining compliance with labor laws. Tips for auto repair shop owners to avoid legal issues and manage payroll effectively. https://sescomgt.com/  
      Thanks to our partners, NAPA TRACS and Promotive
       
      Did you know that NAPA TRACS has onsite training plus six days a week support?
      It all starts when a local representative meets with you to learn about your business and how you run it.  After all, it's your shop, so it's your choice.
      Let us prove to you that Tracs is the single best shop management system in the business.  Find NAPA TRACS on the Web at NAPATRACS.com
      It’s time to hire a superstar for your business; what a grind you have in front of you. Great news, you don’t have to go it alone. Introducing Promotive, a full-service staffing solution for your shop. Promotive has over 40 years of recruiting and automotive experience. If you need qualified technicians and service advisors and want to offload the heavy lifting, visit www.gopromotive.com.
      Get in touch with Jamie Hasty: https://sescomgt.com/
      Paar Melis and Associates – Accountants Specializing in Automotive Repair
      Visit us Online: www.paarmelis.com
      Email Hunt: [email protected]
      Get a copy of my Book: Download Here
      Aftermarket Radio Network
      Click to go to the Podcast on Remarkable Results Radio
    • By carmcapriotto
      Thanks to our Partners, NAPA TRACS, AutoFix Auto Shop Coaching, and Today's Class Discover the significance of mentorship with Bill Weaver, a NAPA Autotech Trainer, and his mentor, Jim Dzurik. They share personal stories and insights into their mentor-mentee relationship, highlighting how mentorship has profoundly impacted their lives and careers. The conversation delves into the importance of passing on knowledge and wisdom to the next generation. The episode emphasizes the value of seeking and offering mentorship to foster growth and personal development. Bill Weaver, NAPA Autotech Trainer. Listen to Bill’s previous episodes HERE Show Notes
      The idea of a mentor-mentee episode (00:01:02) Bill Weaver proposes the idea of a mentor-mentee episode, leading to the discussion of mentorship and the impact of having a mentor in one's life and career. Mentoring Bill Weaver (00:02:05) Bill and Jim discuss their mentor-mentee relationship, including Jim's initial impressions of Bill and the challenges and growth they experienced together. Teaching and learning (00:04:45) How Jim taught Bill about responsibility, punctuality, and the importance of learning and listening, leading to Bill's personal growth. Bill's entry into the transmission shop (00:05:58) Bill's entry into Jim's transmission shop and the initial impressions and experiences of working together. Challenges and growth in the mentorship (00:07:17) Jim's candid admission of being frustrated at times and the challenges they faced, including humorous anecdotes about being fired multiple times. Teaching the "why" and "how" (00:10:24) The importance of mentors teaching the "why" and "how" to their mentees, and Jim's realization of his role as a mentor. Passing on knowledge (00:12:07) Bill's realization of the importance of passing on knowledge and being a mentor to the next generation, inspired by his own mentors. Memorable moments and popular culture (00:14:11) Fond memories and experiences shared between Bill and Jim.. Star Wars memory (00:17:20) Discussion about watching Star Wars and the impact it had. Mentorship and life skills (00:20:26) Discussion about the mentorship relationship, life skills, and wisdom. Importance of research and failure (00:24:06) The significance of research, failure, and learning from mistakes in mentorship. NASCAR and boxing stories (00:28:47) Stories about NASCAR involvement and interactions with famous boxers. Retirement and family influence (00:31:29) Conversation about retirement, longevity, and family influence. Legacy of mentorship (00:32:56) Reflection on the impact of mentorship and teaching. Finding one's calling (00:38:00) Discussion on how individuals may discover their true calling and the importance of pursuing it. Becoming a mentor (00:40:11) Encouragement for individuals to volunteer as mentors and the impact of expressing gratitude to mentors. Persisting and seeking knowledge (00:44:25) The importance of persistence, continuous learning, and adapting to changes in the automotive industry. Thanks to our Partner, NAPA TRACS NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Thanks to our Partner, Auto-Fix Auto Shop Coaching Proven Auto Shop Coaching with Results. Over 61 Million in ROI with an Average ROI of 9x. Find Coach Chris Cotton at AutoFix Auto Shop Coaching on the Web at https://autoshopcoaching.com/ Thanks to our Partner, Today's Class Optimize training with Today's Class: In just 5 minutes daily, boost knowledge retention and improve team performance. Find Today's Class on the web at https://www.todaysclass.com/ Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on X (Twitter): https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections                                  
      Click to go to the Podcast on Remarkable Results Radio
    • Water Proof And Self Adhesive
    • By carmcapriotto
      Thank you to our friends at RepairPal for providing you this episode. As shop owners we were part of RepairPal’s Certified network and you can learn more at RepairPal.com/shops.
      Show Notes
      First: who is your audience? What are they looking for? Listen! Make notes of their questions Read - They Ask You Answer Where to find content: In your shop! Haha Personalize content based on what’s going on in the shop Your niche, club, or group Questions asked in local community groups Your community! Show off your roots - the things going on in the community (Chamber, BNI, local government, tourism, clubs, education, etc) Hiring + Promoting Customer reviews The obvious: Name, address, phone, scheduling link, and website Blog content  Promoting other social media platforms you are on What you’re all about…who you are…. Company culture stuff Trainings you attend or host and completions/certifications What’s going on? Promotions, events, contests, birthdays, celebrations, sponsoring anything? Spotlights: new products, equipment, team members The not-so-obvious: Videos - give yourself and entire month of marketing from one video! Creating a ‘content machine’ for yourself. Blogs Canva tips and templates Practical Tips: Use your brand Use Canva for quick/easy/effective Make a plan/schedule Website traffic Tips on Tuesdays/Tech-Talk Shop culture  Promote services, sales/offers, appointment booking link Fun on Friday  
      How To Get In Touch
       
      Group - Auto Repair Marketing Mastermind
      Website - shopmarketingpros.com 
      Facebook - facebook.com/shopmarketingpros 
      Get the Book - shopmarketingpros.com/book
      Instagram - @shopmarketingpros 
      Questions/Ideas - [email protected]
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors



×
×
  • Create New...