Quantcast
Jump to content

North vs. South - A battle not between the states but a battle it is


Gonzo

Recommended Posts

North vs. South

 

There’s a battle that’s been raging in the auto repair business for as long as I can remember. There’s a definite line that separates the north and south, and it’s not the Mason/Dixon line. It’s known as the “Rust Belt”.

 

If you’re not familiar with it, well then, you must be from the far south. Any mechanic on the northern side of the rust belt knows it all too well. Rust seems to get into every area of the car, but it’s more evident underneath the car where it seldom gets washed off. Especially in an area that uses a lot of sand and salt, or a mixture containing salts and a chemical agent. Years ago in a lot of areas, they’ve outlawed studded tires because of the damage they could do to the roads, so a lot of those municipalities opted for these chemical concoctions instead. There’s less road damage from tire studs, but pot holes and car exteriors haven’t fared as well.

 

Rusty undercarriage parts carry their own rules for repair. Such as a rusted away tie rod nut that needs removed. Rather than even trying to put a socket on one of those half deteriorated nuts, the best thing to do is holler, “Get the gas axe!” (Cutting torch), and the more winters a car survived or the further north you go, the more the ol’ gas axe is as essential as a good set of sockets.

Even though trained mechanics are the same no matter where you go, there are still differences between what a mechanic north of the rust belt has to deal with vs. someone on the south side of it. The biggest difference is definitely having to deal with the rust. Rust and more rust.

Once in a while I’ll get one of those northern cars that has crossed the line and is now transplanted into my neck of the woods. They are easy to spot; just put it up on the lift and you’ll know. Even though the engine compartment isn’t immune from the effects of salt degradation, it’s a lot more noticeable under the car. The amount of rusted, flaking metal, and deteriorating nuts and bolts under some of these cars is unbelievable, and some of these rusty rides aren’t that old. (At least I haven’t run across a pickup truck where the frame has rotted off between the bed and the cab to the point it separates in half when you put them on the lift! I’ve seen a few photos of these rusted through trucks. Yikes!)

Since I grew up north, but moved below the rust belt line years ago, I’ve seen a lot of inventive ways people have come up with to subdue the ever encroaching rust Mother Nature has so graciously handed us. Undercoating, zinc plates, and some crazy electrical unit that is supposed to prevent rust from degrading the metal (Good luck with that one.), just to name a few. As a matter of fact some manufacturers actually offer lifetime warranties against rust on their vehicles that are equipped with their own patented rust prevention systems. Undercoating is probably the most popular. Works great, to a point. That is, until you need to replace a brake line or pull a fuel tank and that stuff is coating all the straps and bolts. (Been there-done that.)

 

There are also many other components affected by the long cold winters and road conditions. From suspension parts to the engine, nothing is immune to Mother Nature. Back in the days when most cars were still using a single grade motor oil (I know… age check here) and you had a really cold night the engine oil would turn as thick as molasses. Needless to say, a good strong battery and a sluggish turning engine… something had to give. Most of the time the weak point was the starter bendix driver, other times the bendix was fine but the starter housing would snap. But, even in the south I’ve seen the same thing, and I have even had a few ABS reluctors get iced over and split off of a CV shaft.

The further south of the rust belt you go the less snow, but more freezing rain and ice. It can coat everything with a thin layer of unyielding and impregnable ice. You can’t open a door or the hood, and whatever you do, don’t turn on the wipers. It seems like every year somebody will drop their car off with one wiper arm flopping around, while the other one scrapes across the windshield.

I can’t say for sure, but I’d bet there are certain diagnostic differences when it comes to certain situations between the north and south. These changes to certain diagnostic procedures may have something to do with all the rust or the extreme cold temps. But, in the south there are just as many different diagnostic adventures as well. The biggest issue is the heat. The never ending, over 100 degree days that just destroy rubber, glass, interiors, electrical systems, radiators, etc…. Some days even in the shade it stays well over a 100. No need in worrying about freeze plugs popping out, but you might need to worry about the dash pad warping so bad it looks like ocean waves. Just try keeping an aging car’s A/C system working in 105 degree weather while in traffic, without the engine overheating. And, did I mention… it’s hot! It’s really hot! It’s not uncommon to get into a car that’s been waiting in front of the shop to reach 145 degrees or more inside it.

 

Up north the winter season is several months long, and seems to linger on longer and longer the more you anticipate its end. In the south the winters aren’t nearly as long, but can be just as severe. Sure, they’ll still throw the sand and salt out below the rust belt, and yes they’ll plow the main roads. However, not all roads are plowed and not every municipality in the south has the same kind of inventory of equipment of a equivalent sized town would have up north. So, in most cases if there is even a warning of a potential accumulation of any amount of snow (large or small) all the schools close, businesses shut down, and all the groceries stores shelves will be cleared. You’d think it was an invasion or something if you didn’t know any better.

 

 

Between the snow, ice, hot temps, pot holes, rain, lightning, floods, and everything else you can think of that Mother Nature can throw at ya, repair shops have their hands full. Battling Mother Nature on either side of the rust belt has always been a never ending job. Mechanics just have to do certain things a bit differently depending on which side of the rust belt you’re on. It’s a long battle, and I don’t think Mother Nature is going to let up any time soon.


View full article

  • Like 1
Link to comment
Share on other sites

Being from the heart of the Old Confederate South, I was just talking with our master tech about rust and the north. How does flat rate even work up there? Do y'all multiply it by 2x for every suspension job?

 

Say what you will about the heat in the south, I'll take southern heat and sweat over snow and salt any day!!

  • Like 2
Link to comment
Share on other sites

Flat rate up here makes real men out of technicians! I've been in the rust belt my whole life, there's no surprises. Any exhaust work means all new hardware, alignments require the torch, my CP717 air chisel is used every day without exception. The junkyard is full of 2005 model year cars that rotted out. 10 years is all a car can take up here if not washed off religiously. I buy subframes from southern junkyards, they can't give them away locally. We probably change 2 a month.

Edited by alfredauto
  • Like 3
Link to comment
Share on other sites

I get the rust here also. The "snowbirds" leave the cars parked under the carport 4 months. They live in the condos on the beach. Come Oct-Nov I will see them with rotted brake lines, seized calipers, etc. All from the salt spray from the ocean.

Jeff, I purposely left out salt spray for a future article on coastal mechanic work.... So your in on the next article. ROFL.

  • Like 1
Link to comment
Share on other sites

Flat rate up here makes real men out of technicians! I've been in the rust belt my whole life, there's no surprises. Any exhaust work means all new hardware, alignments require the torch, my CP717 air chisel is used every day without exception. The junkyard is full of 2005 model year cars that rotted out. 10 years is all a car can take up here if not washed off religiously. I buy subframes from southern junkyards, they can't give them away locally. We probably change 2 a month.

I forgot all about how much time is spent with the old air chisel. A 2005 down here is an average car, and I'm still getting models from the 90's coming in the shop. There is definitely a difference from the north to the south.

Link to comment
Share on other sites

Being from the heart of the Old Confederate South, I was just talking with our master tech about rust and the north. How does flat rate even work up there? Do y'all multiply it by 2x for every suspension job?

 

Say what you will about the heat in the south, I'll take southern heat and sweat over snow and salt any day!!

When doing a job that will require tackling rust, we add labor to the job. An explanation is given to the owner that time was added due to the age of their car and the amount of rust on the parts; parts that are seized are shown to the customer.

Link to comment
Share on other sites

When doing a job that will require tackling rust, we add labor to the job. An explanation is given to the owner that time was added due to the age of their car and the amount of rust on the parts; parts that are seized are shown to the customer.

Being from the heart of the Old Confederate South, I was just talking with our master tech about rust and the north. How does flat rate even work up there? Do y'all multiply it by 2x for every suspension job?

 

Say what you will about the heat in the south, I'll take southern heat and sweat over snow and salt any day!!

I just priced a subaru rear wheel bearing and just added 2 hours and explained there's a good chance we'll need bolts etc

 

Sent from my SM-N910V using Tapatalk

Link to comment
Share on other sites

An average car here in my area of Oklahoma ranges from new to 30 years old. Heat fades the paint right down bare metal, but very little rust. However, the older the car the more home-grown repairs I run up against. Lots of melted connections, overheated modules, etc... the big issue is people who have a 20 year old relic with module driven lighting, PCM's or A/C controls that fail... can't understand why they can't find parts... dah....it's 20 years old. The car may look new...but it ain't new. LOL.

Link to comment
Share on other sites

  • Have you checked out Joe's Latest Blog?

         5 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Changing The Industry
      The Basics of Owning An Auto Repair Shop - Balancing GP per Hour and Productivity
    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By carmcapriotto
      Thank you to our friends at RepairPal for providing you this episode. As shop owners we were part of RepairPal’s Certified network and you can learn more at RepairPal.com/shops.
      Show Notes
      Reasons Google will suspend your GBP Adding Keywords to Your Business Name Using PO boxes or virtual office addresses Using your home address for a service area business - mobile mechanics Making major changes to your information - name, address, phone number Adding Reviews - Talk about RV Masters Recent experience Spam Reviews Two businesses sharing an address - same with phone number A competitor reported you  Dandy Review Removal: Negative review removal using AI They had to rebrand from ReviewVio because of all the negative reviews and complaints that they received. They over charge and under deliver. It is a 12 month contract - not monthly Writer’s Hand: WriterHand.com's Review Generator AI employs state-of-the-art natural language processing algorithms to produce high-quality reviews in a matter of seconds. The tool is designed to cater to the needs of both individual writers and businesses seeking to enhance their online presence. By simply inputting a few key details about a product, service, or experience, users can obtain well-crafted reviews that reflect a genuine customer's perspective. Embed Social: Use AI tools to help you collect more reviews, reply to reviews faster and make your reviews widget designs. New AI Optimization services: Boost Ninja:  Speak on Accurate Automotive GBP Listing being suspended after adding this company to their listing - Supposed to be a Google Maps ranking system by boosting local rankings by targeting top keywords and AI Optimization to your Google listing Problem is when you talk to client’s who have hired companies like this and ask what they are actually doing - the answer is the same: “I have know idea”  
      How To Get In Touch
       
      Group - Auto Repair Marketing Mastermind
      Website - shopmarketingpros.com 
      Facebook - facebook.com/shopmarketingpros 
      Get the Book - shopmarketingpros.com/book
      Instagram - @shopmarketingpros 
      Questions/Ideas - [email protected]
      Click to go to the Podcast on Remarkable Results Radio
    • By carmcapriotto
      Thanks to our Partner, NAPA Auto Care Customer service is the backbone of any successful auto repair shop. Tom Petty discusses the critical role of clear, effective communication with customers. And guess what? It all starts with your internal team and company culture. Tom Petty, Petty Motorworks, Waretown, NJ Show Notes
      Watch Full Video TST Seminars: https://www.tstseminars.org/ NAPA Auto Care Gold status (00:01:24) Tom Petty discusses NAPA AutoCare Gold status and its significance. Technical training and progression (00:03:13) Tom Petty's technical training and progression through the years. Family business and technical training (00:04:22) Tom Petty's decision to start a family business and his involvement in technical training. Engaging technicians and setting shop culture (00:05:44) Discussion on setting the culture for a shop and engaging technicians in training. Apprenticeship and mentoring (00:08:13) Tom Petty's approach to apprenticeship and mentoring young technicians. Automotive vocational education (00:11:10) Discussion on the need for a specialized automotive charter program in vocational education. Challenges in the automotive industry (00:13:03) Challenges faced by young technicians in the automotive industry and the need for development and support. Starting wage and labor margin (00:14:36) Discussion on starting wage for technicians and the importance of labor margin for business sustainability. Post-education career advice (00:15:31) Tom Petty's advice for students coming out of a two-year automotive program regarding starting wage expectations. Structured Raises (00:15:37) Discussion about implementing structured raises for technicians to prevent wage suppression. Setting Technician Wages (00:19:06) Discussion on the importance of setting technician wages based on experience and productivity. Communication and Customer Service (00:23:53) Importance of effective communication, especially through digital inspections, and its impact on customer service. Training Alliance (00:28:00) Formation of an independent training alliance to improve technical training in the local area of New Jersey. Kidney Donation (00:30:44) Tom Petty's kidney donation. Life Post-Surgery (00:33:14) Tom Petty shares his experiences after kidney surgery and discusses the minimal impact on his daily life. Avoiding NSAIDs (00:33:53) The importance of avoiding certain pain medications for kidney health, with a cautionary example. Recovery and Kidney Function (00:34:31) Insights into the recovery period after kidney surgery and the remarkable adaptability of the kidney.
      Thanks to our Partner, NAPA Auto Care Learn more about NAPA Auto Care and the benefits of being part of the NAPA family by visiting https://www.napaonline.com/en/auto-care Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections  
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors










×
×
  • Create New...