Quantcast
Jump to content


dfrisby

Looking for shop Toledo, Ohio

Recommended Posts

I have a customer that is working in terryburg Ohio that is having issues with his Toyota pickup. Hard to diagnose over phone and looking for a shop in the area. Has codes for mass airflow sensor and tranny is acting up. We replaced transmission a few months ago and it's still under warranty. He replaces mass sensor and problem got worse.

 

Sent from my SM-N920V using Tapatalk

 

 

Share this post


Link to post
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Forum Topics

    • Customer's buying their own parts

      Hey guys. I'm new to the forum and was looking for this subject but couldn't find it. Sorry If I'm posted something that's already been discussed. I own a brake shop in Austin, TX. We do anywhere from 10-20 brake jobs a day. We only do brakes so I don't know how much full service auto shops deal with this problem but... Customers are constantly calling in claiming they've bought the best parts or they want to provide their own parts because they've done research and know what is best. This drives me crazy. First of all they don't know whats best. Then after being told no they get offended and act like tons of shops allow this. What is the best way to handle these customers? Just send them away? I'll quote them a price using our parts and they act as though its a rip off. What shops are doing this for their customers? I feel like I'm letting jobs get away from me. Any experience with this?

      By Jonathan Ganther, in General Automotive Discussion

      • 49 replies
      • 2,972 views
    • Aftermarket Parts Issues Driving Me Up A Wall!!!

      There are days I want to set the place on fire (sometimes just customers cars) ok just kidding. I seem to be getting a streak of problematic parts lately. I am so tired of reps telling me about quality, oem specs, warranty blah blah. My main supplier is AAP. Here are some examples below. - 2000 wrangler needing rear axles due to bearing failure. Ordered Dorman axles and both had fitment issues where once installed the differential pin wouldn't fit in due to improper clearances on the axle. Ordered another brand online Yukon Axles. - 1995 Lexus SC300 (mint cond, low miles) Felpro valve cover gasket was manufactured too thick and didn't fit in the groove on the valve cover. Ordered from Lexus and fit fine. - Forgot the year (Chrysler van) water pump with a pulley that wobbled and even the online reviews had the same issue.  - 1993 Wrangler water pump machined incorrectly where once bolted to the block, the ears of the pump where the ps pump bracket bolts to was not machined correctly and if you tried to bolt it on it would bend the water pump. Ordered AC Delco (i think) from Cold air distributors and worked fine. - 1999 Lexus ES300 front left brake hose manufactured incorrectly. Ordered another brand, probably Raybestos from Cold Air Distributors, and all is well. - 2003 Taurus 3.0 OHV timing cover from Dorman 635-117. Online reviews had some issues but the oem unit was expensive. I ordered 3 before I found one that was machined good enough then installed. Came back a while later leaking. I ordered a replacement under warranty and the quality control was horrible. Just ended up getting the ford one and looked and seemed to work great. Time will tell - 2005 Honda Element Monroe struts all the way around (these are the ones) in the front like the civics where the strut has the bracket where the tie rod bolts to. Left front was fine. Right front couldn't get aligned properly as the bracket for the tie rod was welded on at the wrong angle. Went through a couple from the local parts store then I think Monroe sent me a strut that was tested to be ok on their manufacturing/ quality control/ measurement jig and it still failed. They paid to have the old Honda part sent back for inspection. I think i ordered KYB for the front and all was well.  I use the AAP Wearever Platinum which have been great brake pad material and braking, but lately they don't fit properly and I have taken video to show the reps and I believe when the backing plate is cut, there are imperfections where it wont fit into the caliper bracket without me grinding the backing plate on the edges. The actual manufacturing company for them sent a rep to a local AAP BBQ event and I talked to him and he is very aware and they supposedly changed the manufacturing process to address this issue but recently I did a brake job and had the same issue then installed Akebono and all was well. I am considering switching to the Wagner TQ which they stock as well. They give me an across the board pricing on the Platinum pads of $34.99 on most vehicles. Has anybody got a good pricing structure on the Wagners? AAP gives a 3 month parts and labor warranty on pretty much everything they sell. The labor is reimbursed on my parts account at 1/2 my shop labor rate times the book time. The problem is I still have to write up an invoice showing that I replaced the part and didn't charge the customer, and spend time calling their hotline and explain what happened, then fax or scan and email the original invoice, warranty invoice, original parts invoice with the claim numbers and I still have to call and check in to make sure the claims have been processed and paid out. This takes time and is not very encouraging. Otherwise the parts themselves have the standard warranties, 2 year, 3 year, lifetime, etc. though this still requires me to redo the repair that should have been successful the first time. I am the owner and mechanic and I waste so much time in the office dealing with parts, Calling manufacturers tech support lines, taking measurements, sending pictures of parts problems. Then if I cannot get it resolved having to research another part. The Dorman timing covers were terrible. the metal was porous and i sent them a screenshot of their website talking about "High quality plastic or metal construction resists warping, cracking and porousness". I am surprised that these companies don't look at the reviews of their own products and correct the issues. I do need another technician so I don't have to wear so many hats but in the meantime how do you folks deal with these types of issues.  The other issue is because I am not a high volume purchaser, although it is getting better as I grow, I have to purchase the majority of my parts from AAP to keep myself on a reasonable tier level. If I spread my purchases around then I can fall off the tier level in a short time. I like AAP and they have a warehouse near me and have a vast inventory available locally as opposed to other suppliers. Most of the stuff I get is name brand stuff to avoid junk parts. I like Moog, National, Motorcraft, Delco, Etc so its not like I am trying to be cheap on everything, I just seem to get burned a lot. When the commercial reps come by, it is usually to check up on business and try to sell me something or a service or a package deal, however when I show them the issues I am having, they really don't or cannot do anything other than listen and tell me about their "quality parts". I ask for the numbers to the engineering departments to try and at least get some of these issues resolved and I cannot get through. How do ya'll deal with these situations?

      By [email protected], in Automotive Products & Services

      • 21 replies
      • 851 views
    • The person answering your phone may be killing your repair shop

      A few weeks back I had a problem with my refrigerator.  I got a referral and called an appliance repair company. I called three times and each time I called this is what happened: "C and E appliance, please hold."  I was put on hold three times for about 5 minutes. After being put on hold each time, a women would say, "What's the problem?"  No engagement, no sign of interest for me the customer, no signs of caring.  I gave the women a brief description of the problem and each time she told me someone would call me back.  Well, no one did. So, I called for the 4th time, and as the person answered the phone I said, "DO NOT PUT ME ON HOLD."  There was silence, so I continued.  I explained to her that she has spoken to me three times,  I left messages three times and three times you told me that someone would call me back.  She replied,  "You are talking to the wrong person, if you have any complaints, write a letter to my boss, after all he won't listen to me anyway."  I hung up the phone and called another company. The lesson and takeaway here is simple: Who's answering your phone?  The wrong people on the phone in your shop can kill your business.  Have meetings with your people. Make sure you review your phone skills policy. If you don't have one, create one.  Empower your people to people to handle issues. And make sure you log every phone call. If you feel you have a problem, start recording phone calls.  Your phone is your lifeline to future business.  So, please ask yourself....Who's answering your phone?   

      By Joe Marconi, in Joe’s Business Tips For Shop Owners

        
      • 5 replies
      • 518 views
    • Article: Defining Your Ideal Customer

      We all have our favorite customers. You know who there are. They’re the ones that throw their keys on the service counter in the morning and say, “Do what you need to do and I’ll see you at 5 p.m.” They never question your price, they trust you and they keep coming back. But does that person define your true profile customer? The answer is probably yes. But it’s not the only criteria. It’s a little more complicated than that. Defining your true profile customer starts with you. It starts with who you are, why you are in business and the culture of your company. By the way, determining your true profile customer has nothing to do with excluding certain people due to their income level. The young 23-year-old college graduate who sets aside part of her paycheck to shop at Whole Foods does so because she believes in the company and for what they stand. It’s not about what she “supposedly” can or cannot afford. She is Whole Foods’ profile customer because she aligns herself with that brand. And Whole Foods welcomes her with open arms. Many of my profile customers endured tough economic times during the Great Recession of 2008. They lost their ability to pay for some of the things they previously could afford. What they didn’t lose was their loyalty to my company. So, what did we do? We helped them through that difficult time. We helped them manage their car care needs better, offering services that would save on fuel, reduce repair costs, and reduce breakdowns. We showed them how to squeeze every mile out of their tires and brakes. We took care of them and we still do to this day. We consider them family and we don’t turn our backs on family. One thing we didn’t do, and will never do, is compromise on price to get a job. That would not be fair to all my customers, my employees or the company. With regard to pricing your services and repairs, it’s a delicate balance between being profitable and competitive. But I don’t know of any shop that prefers a customer walk away or sends someone to another shop because he or she cannot afford a particular price. A smart service advisor will give options, prioritize the work needed, and offer finance options. If you’re a startup company, your doors are wide open to everyone. You need customers and car counts, and you need them right away. But as your business matures, you begin to realize that not everyone is your customer. And there’s nothing wrong with this realization. As you build your customer base, you begin to see that there are customers that respect the work you do, align themselves with your culture and appreciate what you do for them and for the community. They become your profile customers. Let’s say you sponsor a youth baseball team in your area, help out at community events and involved with local fundraisers. You will become known as the business person that cares about the community and children. That’s making your business stand out among the rest. As you define who you are, you also attract those that want to do business with you and support your brand. While I do recommend treating everyone the same, I don’t recommend trying to be everything to everyone. That’s not a sound marketing strategy—that’s a recipe for failure. Defining your customer and targeting your market does not isolate consumers. It actually increases market share. Here’s an important fact: In your geographical area, automotive shops basically do the same thing; they repair and service automobiles. So, how is a consumer going to choose you over another? You need to stand out. You need to be different. You need to build a brand culture and establish a marketing position that will make people take notice. By the way, every successful company, large and small, understands its true profile customer and creates a marketing plan on attracting them. One last thing: When you build a business around your culture, you put the focus on your brand and the value you provide. This strategy is one of your pathways to success. When you combine value with culture, you will have an enduring and profitable company. If you want to build a great company, ask yourself these questions: Why are you in business? What’s your life’s purpose? Your culture? Build a marketing strategy and a brand message around the answers to these questions. Not all people will take notice, but your profile customers will.    This story was originally published by Joe Marconi in Ratchet+Wrench on August 3, 2018
      View full article

      By Joe Marconi, in AutoShopOwner Articles

        
      • 0 replies
      • 101 views
    • Customer Financing

      We want to start offering finance options to our customers. Can anyone recommend some companies that you use? I've heard good things about One Road Lending. GE Capital is now Synchrony and they have horrible reviews. Appreciate your help! Thanks, Pam

      By pam, in General Automotive Discussion

        
      • 17 replies
      • 1,115 views
  • AutoShopOwner Sponsors



×