Quantcast
Jump to content


Gonzo

Article: Where There's A Spark - - - time to play fireman

Recommended Posts

Where There’s a Spark

 

Fires, one of the last things anybody working on a car ever wants to deal with. Statically speaking, you can’t avoid it. Considering the nature of the auto repair business with numerous chemicals, some highly volatile and explosive, the odds are it’s going to happen sooner or later. Sometimes it’s just a quick little poof of a flame, while other times it’s an all-out assault with the fire extinguishers. All you need is a source of ignition and up she goes! Engines in general, are nothing more than a controlled fire and explosion, and sometimes that fire or explosion doesn’t stay where it’s supposed to.

Over my years of working on cars I’ve had my share of them, some through pure stupidity and others totally by accident. And, if anybody who works on cars tells you they’ve never had one go up in flames (even a little bit) is 100% fooling themselves or is a complete liar. It happens to the best of us.

Back when carburetors were the norm a backfire almost certainly shoot a huge flame up in the air. Once in a while the oil in those old oil bath air filters became a rather convenient furnace for the latest back fire. Gasoline spills, oil leaks, and just about any other type of chemical concoction can become a ball of flames in no time at all. Of course, ya can’t leave out the ‘electrical fire’ either, but calling a fire an ‘electrical fire’ doesn’t sit well with me. Electricity is only the spark to ignite it. If there are no combustibles nearby, electricity on its own can’t erupt into a ball of flames.

 

But, you hear it all the time, “Oh, they had an ‘electrical’ fire.” So, if it’s Ok to call a fire an electrical fire, then I guess it’s OK to call one of those movie scenes where the guy shoots at a pool of gasoline leaking out of a huge tanker which subsequently explodes --- a ‘gun’ fire? Hardly, I believe in that case it would be called a ‘chemical’ fire. But, when electricity is involved… it’s an ‘electrical’ fire. Go figure. Unless, they are merely referring to an electrical spark as the catalyst, well then, ya got me there.

Many years ago I had a 280z that came in and the owner said he couldn’t get it started. Nothing else, no ten thousand word explanation of the problem, or when he bought it, or what parts he’s changed, or what his friend who’s a mechanic told him was wrong with it, just that it wouldn’t start. Later that day I made my way out to the parking lot to check it out. I turned the key, cranked the engine, and WHOOF! Flames shot out from every corner of the hood. I made a beeline for the fire extinguisher, got the hood open … and doused the flames with the whole can. Come to find out the owner had pulled the fuel lines off of the injectors and had the coil wire disconnected. Nice…thanks for the heads up, fella. Needless to say, it was one of many occasions that I needed to refill the extinguishers.

Another time a customer called and told me his pickup would only run for about ten minutes and then would barely idle. If he shut it off and waited another ten minutes it would start back up again. He said he was going to try and make it to the shop that afternoon. It was getting late and I was looking forward to going home, but this guy had called several times telling me to wait for him and that he was still going to make it. So I said I’d stick around. It was dark by the time he finally arrived at the shop. We were busy filling out the paperwork when the parking lot lit up like a large candle. His truck turned out to be the candle. I grabbed two extinguishers for this one, and ran outside to find the guy standing next to his truck waving his hat at it. Yea, like that’s going to help. It took both extinguishers to put this blaze out. There was a whole lot more work that needed done besides finding out the cause of the loss of power. It turned out to be fuel trim issues and a clogged converter that would glow as red as a cherry. The fire was caused by the truck’s fuel line that ruptured right there in front of the shop. Pretty scary stuff when I found out how close it was to going off like a bomb.

What’s even more startling is when you don’t even know there’s a fire. You’re working under the dash and the next thing you know one of the other guys in the shop is filling the engine bay with CO2. That’ll get your attention. Then, of course, there’s the car that’s delivered to the shop and the owner tells you, “It had a little fire.” Sure, just a little fire. The CO2 is an inch thick everywhere you look. Anything plastic has melted into an oozing pile of blackened gunk. All the rubber hoses are charred beyond recognition, and the wiring is one huge clump of twisted copper and melted plastic. I often wonder what some people consider a ‘large’ fire after I’ve seen these so called little fires.

Just this week I had one up on the lift looking for a major oil leak. The oil was dripping off of the frame from the front to the back of the car. I had just got the car in and left the engine running while I took a quick look. (Which I’ve done hundreds of times before.) This time, I wasn’t so lucky. As I shined my flashlight up into the engine bay there was a loud boom, and a huge ball of fire engulfed the entire area. Luckily, I had enough sense to have extinguishers mounted on every lift and it was out before any damage occurred. It did give me a quick haircut and a few singed eyebrows though. When you can smell burnt hair… you know you’re too close! Wow, that was hot, and so sudden and unexpected too!

You hear about entire shops burning down all the time after a car caught fire in a service bay. It’s something I don’t want to experience, and for that matter any other repair shop. That’s why I don’t hesitate a second when those guys come around to service all my fire extinguishers each year. It pays to have as many as you can. The fire extinguisher companies have recommendations for what kinds of extinguishers you should have and how many based on the size of the shop. I tell them… double it. I don’t have a whole lot of hair left these days, and I’d like to keep what I got. Seriously, I don’t need any more of those flame cuts, my barber does a pretty good job on his own.

Accidents will happen; cars will have back fires, electrical issues, hot components, and leak combustible fluids. Just be sure you’re ready to handle the emergency when it happens. Cause ya know… where there’s a spark…..

 

 

 

 

Click here to view the article

  • Like 1

Share this post


Link to post
Share on other sites



  • Similar Forum Topics

    • Killer Holiday Tip for your repair shop

      Here's a tip I have posted before, but it's worth repeating.  One job that goes unnoticed most of the year is the job of the part's driver.  You get part deliveries all day long, every day, all year long.  Many times, these part's drivers take all the abuse due to wrong parts, the parts took too long to be delivered, on and on and on.  Those drivers may not say anything, but they take it to heart.  So, here's what you are going to do.  Buy small gifts, such as small boxes of candy or chocolate.  Nothing expensive.  During the holidays, give all the drivers one of these small gifts and say "Thank you, I appreciated what you do." Two things will happen. First, the driver will be stunned and will not know what to say, and they will be very thankful that you thought of them.  The second thing that will happen is this:  The very next time those part drivers have three delivers to make at three different shops, what shop do you think they will want to go to first?  Yes...Yours!  

      By Joe Marconi, in Joe’s Business Tips For Shop Owners

        
      • 2 replies
      • 99 views
    • Seeking/open to Partnership for Repair Shop Planning

      Hey All, My name is Karla, I had previously owned a 3-bay mechanical repair shop in Burlington, VT for 6 years and built it to maintain an outstanding reputation and provide a comfortable income. I had the opportunity to sell my half of the business and finalized that deal this past fall. I have worked in all areas of the auto repair industry over the past 15 years, graduated from a two-year ASE certified auto tech program and went on to earn my Bachelor’s in business and a masters degree in executive leadership.  I have some capital I will be contributing to the planning and opening of a new shop and am very open to meeting potential partners/investors in all areas of the country. I greatly look forward to building something new in a location new to me. Anyway, I’d like to welcome all /any interest and to answer any questions about joining forces in shop planning and management. Please do not hesitate to contact me, thanks for considering! —Karla

      By KDshopNEA, in Automotive Business Opportunities

      • 1 reply
      • 305 views
    • Mobile Auto Repair?

      Hello Everyone! Hope you enjoyed your Thanksgiving as much as I did. I wanted to bring this topic up because of PEP BOYS recent "expansion" into launching their "mobile" service. I was interested in your thoughts. Are mobile mechanics a threat to your shop in any way? What are your thoughts? Do they/can they provide the service that today's cars need? 

      Or, on the other hand, do you operate as a mobile tech? What are the struggles you face. From what I am hearing, people "seem" to expect mobile to be cheaper. 
       
      Only trying to start a discussion about this - and really because, from what I am seeing, there's a lot of buzz around the Pep Boys effort.  Comments? Really interested to know your thoughts.    Matthew Lee
      "The Car Count Fixer"
        PS: Join me on YouTube and check out this totally FREE on-line course I'm offers- "How to Double your Car Count in 89 Days!"

      By JustTheBest, in Auto Repair Shop Management Help? Post Here!

        
      • 4 replies
      • 139 views
    • Increase auto repair sales by adding to the cart

      Retail stores have known for a long time that adding or increasing the size of shopping carts also increases sales. Consumers may go to the store with a list, but as they pass through the aisles, having a cart makes it easy to add to that list.  While your repair shop does not use shopping cart, the same strategy can used. Every customer that books an appointment as done so with some sort of list; an oil change service, a brake issue, tire rotation, etc.  Through an effective multipoint inspection and looking at service schedules, you can make suggestions to your customers that can add to their cart; essentially increasing sales per vehicle. One last thing: Always make service and repair suggestions to the customer that is in their best interest and have value, and you can’t go wrong.  It’s actually great customer service. 

      By Joe Marconi, in Joe’s Business Tips For Shop Owners

        
      • 0 replies
      • 218 views
    • Article: Challenges Of The Auto Repair Business

      As the auto industry moves on into the modern age, repair centers all around the country are experiencing pressure with the tech world and our world colliding. We are all trailing nationwide franchises and dealerships that have endless resources working at their disposal. For most smaller auto repair businesses there isn’t enough time, money, or energy to attempt to constantly and actively secure the new business. We’re mostly worried about attempting to maintain the existing business we have, which has newer cars and increasing demands. Most of our time is now spent adjusting to the learning curve of advanced vehicle systems. However, that’s just a shop problem. The front office of your shop has its own issues to contend with that didn’t exist 15 years ago. Make no mistake about it, our industry is in the middle of a revolution and with 3D printing knocking at the door… the amount of balls to juggle are going to be considerable and it's all just getting started. Today’s auto repair businesses need to worry about the following: Location – Securing a proper location and the authorization to conduct business there over the long term ensures survival. Tools – Without the proper tools, we just can’t work on today’s vehicles. Training – Without the proper training, we put ourselves and our customers at high risk. Employee Engagement – Keeping your employees as interested in your success as you are is critical to the elements that keep people returning and employees from leaving. Employee Advancement – Providing an environment where employees know they can grow with your business, whether financially or moving up within the organization, is the key to keeping and securing talent. Marketing – This is the most complicated element in today’s world. It involves a mix of a strong web presence, good advertising ethics, social media profile, and following up with customers. Advertising – Can be expensive and very confusing. The best method to start is to get your feet wet with small budgets that keep your name in front of your potential customers, constantly. Software – Without good software, it is difficult to run any business. Good software is and always has been subjective. Our experiences indicate that good software saves you time and builds trust with your customers. Most importantly, it should work for you and not against you. This article originally published in CAR's News Section
      View full article

      By CAR_AutoReports, in AutoShopOwner Articles

      • 0 replies
      • 77 views
  • AutoShopOwner Sponsors



×