Quantcast
Jump to content


BendPak lifts, good or bad?


Recommended Posts

I am buying lifts for our new shop and have always used Rotary. I am looking at BendPak and of coarse the Rotary salesman has plenty of reasons we shouldn't get them. I would like an nonbias opinion. Trouble Free? Support? Warranty issues? Quality?

Thanks for your input.

Link to comment
Share on other sites

We bought the 10k lb two post lift about 18 months ago and have been happy with it. We got a second one when we moved to a larger shop and they now had the lower profile arms for the same cost which was cool. For under $3,000 bucks, I think you can't beat it. We installed our first one by ourselves. It took about a day and a half to complete it. But I think most people should be able to knock it out in one day or less.

 

The only issue we had was the overhead cut off switch failed. They sent us a replacement switch for free. One of the installers I spoke to says that fails all the time on other lifts he installs.

 

Overall, I think the quality appears excellent although I'm by no means an expert on steel quality or capacities. It appears as well built as any lift I've noticed at other shops. By the way, delivery took about 5 days from California to Maryland. We bought it through the workshop depot out of california I believe.

Link to comment
Share on other sites

I've had a Danmar Brigadiere 10 ACX in my shop for 2 years now, it's just a rebranded BendPak XPR-10A. It works fine, but I'm constantly having to clean the lift arms. They get real sticky from dirt, road salt and crap that drips off the cars, mostly in the winter, but now they are sticking all year. I have to flush them out with a hose real good while working the arms in and out. I wish the arms would come apart so I could clean them good.

 

Other than that I've had no issues. Price was right at $2450 delivered with an oil change cart thrown in free.

Link to comment
Share on other sites

I've always been partial to Rotary, as they are not made overseas... Bendpak is ok, but Rotary is far superior, in my honest opinion.

 

Stick with Rotary, the extra cost will give extra years of service life! I can't help it, my parents taught me to buy good stuff that outlasts the cheaper alternative!

 

-Jonny

Link to comment
Share on other sites

Have had good luck with our bendpak 2 post. 4 post on the other hand not so much, in the first year had to replace all the cables, 2 front posts, the rolling jack design is not the best, I need to repaint my lift already from the rust, my runway ramps are bowing in the middle. I have another lift ordered as we speak and it is not a bendbak it is a challenger 4 post lift. I will buy another 2 post from bendpak but not a 4 post

Link to comment
Share on other sites

Thanks for the feed back guys. I have had good luck with my Rotary lifts however i was very disappointed with the install of the last three lifts i bought. I did complain and got no service.

The deal was buy Rotary have them install them and get an extended warranty. I haven't had any failures but have issues with the locks on one and the sloppy install was never taken care of. When the rep came by to quote me on the lifts we are now looking into i showed him the issues we had with the old lifts and he said he would get it taken care of that was a few months ago and still have never got any support. I have nothing against Rotary but the dealer and installer may be my problem. So what got me looking at BendPak is when we got the install quote for the new lifts and it was 12k plus the warranty of an extra 450 per lift for the extended warranty allowed with the install. That's when i decided the warranty isn't worth nothing if you don't have a good service company to honor it. So as i looked at other lifts this info got my attention let me know your thoughts. http://www.bendpak.com/a-study-in-lift-design/Two-Post-Lift-Comparison/

If we go BendPak we will install them ourselves, i really think we will end up with a better result.

Link to comment
Share on other sites

I've always been partial to Rotary, as they are not made overseas... Bendpak is ok, but Rotary is far superior, in my honest opinion.

 

Stick with Rotary, the extra cost will give extra years of service life! I can't help it, my parents taught me to buy good stuff that outlasts the cheaper alternative!

 

-Jonny

I am all about you get what you pay for and that is exactly what i am trying to do. You are right Rotary is a US company but from what i have found they are like many companies now days, they are going to china more and more for their parts. US assembled doesn't mean made in the usa.

Link to comment
Share on other sites

I run 3 Rotary lifts and I won't buy another one. Next lift will be Mohawk. Mohawk lifts are twice as thick and made in NY, also more $$$$. Rotary is made in China now as is the same with virtually all the other lifts. Listen to the salesman all you want but check out the new Rotary and see where the materials come from. I dislike the wear sliders and the cables on my Rotary lifts - its a big job to replace them and they are designed to wear out but besides that the lifts work.

 

There's too much at stake to risk being under a lift with cheap steel that can buckle. I've seen lifts fail and there's not a lot of time between the car being up in the air and the car being on the ground, definitely less than enough time to react. I feel the same way about cheap motorcycle helmets.

Edited by alfredauto
Link to comment
Share on other sites

  • 1 month later...
I've had one for 5+ yr's. All good experience. I also check the cables and adjusted the slack every month for the first year and check it every 2-3 months still.
They ship with 220v pumps as stock but have 110 v pumps if you ask (I didn't want to rewire the garage so I went 110v), just slower on the "up"
HD-9 Wide Version (they changed the numbering but it's 116"+ between the posts). Also have the rolling jack and use it quite a bit.
I have the ramps "fixed" with the locks so I can drive a car right underneath it without the sagging, or removing and storing the ramps.
80-img_0057_87e7c9739f8092b1c550c85e0f9c
Biggest issue I dealt with was the available height in the car garages as there is the beam at 10' which was my limits.... but all is good....
80-dsc00186_f5048ff16972fb0d1ab97c64a81a

 

FYI - I have a friend in Wa. who just had the 82" version installed and all he could get out of the height was 78" due to the air locks and he had to "re- jig" the lift to get more than 78"+ as he was parking an F-350 underneath it.
My vote - yes.
Atif Naser
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By CARMandP
      I was talking a few months ago to an old-timer who has been building race engines for 50 plus years and he mentioned something about never turning his radio off in the shop. I am wondering if anyone has ever heard the significance or reason behind this? You could bearly hear the radio was on but thought it was interesting.
    • Fast Free Shipping on All Orders Over $50
    • By carmcapriotto
      The Weekly Blitz is brought to you by our friends over at Shop Marketing Pros. If you want to take your shop to the next level, you need great marketing. Shop Marketing Pros does top-tier marketing for top-tier shops.
      Click here to learn more about Top Tier Marketing by Shop Marketing Pros and schedule a demo:https://shopmarketingpros.com/chris/


      Check out their podcast here: https://autorepairmarketing.captivate.fm/


      If you would like to join their private Facebook group go here: https://www.facebook.com/groups/autorepairmarketingmastermind
      In this episode of "The Weekly Blitz," Coach Chris Cotton from Auto Fix Auto Shop Coaching delves deep into the crucial role of coaching in the auto repair industry. He discusses how coaching enhances performance, accountability, and long-term success for shop owners, service advisors, and technicians. Chris shares insights on the benefits of having a coach, including improved business strategies, goal-setting, and overcoming challenges. He emphasizes that coaching is a valuable investment, leading to significant returns and sustainable growth.


      Throughout the episode, Chris elaborates on the transformative power of coaching, illustrating how it can turn struggling shops into thriving businesses. He provides real-world examples of shops that have seen remarkable improvements in efficiency, customer satisfaction, and profitability after implementing coaching strategies. Chris also touches on the importance of personalized coaching, tailored to address the unique needs and goals of each shop, ensuring that the guidance provided is relevant and actionable.


      Moreover, Chris highlights the role of coaching in fostering a positive work culture. He explains how regular coaching sessions can boost team morale, enhance communication, and create a cohesive environment where everyone is aligned with the shop's vision and objectives. By fostering a culture of continuous improvement, coaching helps shops stay ahead of industry trends and adapt to changing market demands.


      The episode encourages listeners to consider coaching to elevate their business and achieve excellence in the competitive auto repair landscape. Chris underscores that investing in coaching is about immediate gains and building a foundation for sustained success. He invites shop owners to take the first step towards transformation by exploring coaching opportunities, ultimately leading to a more prosperous and resilient business.


      Introduction and Podcast Overview (00:00:22)
      Coach Chris Cotton introduces the podcast and its focus on insights for auto repair businesses.


      Coaching Importance (00:01:16)
      Discussion on the significance of coaching for business owners and its impact on performance.


      Performance Through Coaching (00:02:23)
      Coached individuals consistently outperform those who go it alone, highlighting the value of accountability.


      The Role of Accountability (00:03:31)
      Accountability is crucial for achieving goals, ensuring follow-through on commitments.


      Perspective in Coaching (00:04:27)
      Coaching provides perspective, helping clients see the bigger picture amidst daily challenges.


      Long-Term Investment in Coaching (00:06:22)
      Coaching is a process that requires time, focusing on sustainable change rather than quick fixes.


      Commitment to Improvement (00:07:18)
      Successful coaching fosters a commitment to continuous improvement and resilience in tough times.


      Conclusion and Call to Action (00:08:20)
      Encouragement for listeners to embrace coaching for personal and business growth, emphasizing the importance of progress.


      Connect with Chris:


      [email protected]
      Phone: 940.400.1008
      www.autoshopcoaching.com
      Facebook: https://www.facebook.com/
      AutoFixAutoShopCoachingYoutube: https://bit.ly/3ClX0ae


      #autofixautoshopcoaching #autofixbeautofixing #autoshopprofits #autoshopprofit #autoshopprofitsfirst #autoshopleadership #autoshopmanagement #autorepairshopcoaching #autorepairshopconsulting #autorepairshoptraining #autorepairshop #autorepair #serviceadvisor #serviceadvisorefficiency #autorepairshopmarketing #theweeklyblitz #autofix #shopmarketingpros #autofixautoshopcoachingbook
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors



×
×
  • Create New...