Quantcast
Jump to content

Recommended Posts

Posted

It’s All In The Name?

 

The car, the jalopy, the family truckster, the get-a-bout, the grocery getter, and the rust bucket are just a few of the generic names we have given to our automobiles. Some names are for the affection we have with our ride, while others are for a certain condition or appendage on the car. Hollywood has even gotten into the act of naming cars and making movies about them. “Christine, Herbie, Chitty-Chitty Bang Bang, and a whole lot more. Now, I haven’t named every car or truck I’ve owned, but there have been a few memorable cars that deserved a little recognition with an appropriate name.

Giving cars a name has been around for generations. Even back to the time of the horse and buggy they all had a name given to them by their owners. Just about every car make or model carries some sort of connotation or quirky acronym depicting that particular vehicle. Even the car manufacturers have to give each of their products a name. How else would you know what somebody was talking about if it didn’t? It could be a series of numbers, an acronym, or a name that just sort of goes with the style of car. What you call your car, or what the manufacturers label their car can be just as important as any other part of the car. In some aspects it could depict the reliability behind the name, or it could be what distinguishes it from another car and/or its faults.

 

There have been a few names over the years that have that kind of reputation. The Edsel, Corvair, AMC Pacer, and so on. Just the mere mention of the name of some of these models gets you thinking about some aspect of that particular car. Then there are those production names that if taken out of context are not all that well accepted in certain company, such as the Probe, Hummer, Swinger, and the like. There are a few names that I never quite figured out how they ever decided on using them together. The Dodge Ram for example; two words that in certain contexts means to avoid… or smash into. Surely somebody at Dodge noticed that too.

 

How about some of the spelling of these names from the manufacturers? Half the time when I’m writing up an invoice for a certain car, and I’m not sure of the correct spelling I’ll just scribble something that looks sort of like the name, and wait until I get out to the car and copy it down correctly. Look how many different spellings there are for Sequoyah for instance.

Some manufacturers pick out names related to certain natural occurrences. VW for a long time named all their cars after different winds from around the world. Even more hilarious is the pronunciation of some of these car names. Come on admit it, the first time you looked at the word “Prius” you pronounced it wrong (me, too). There are some of these car names I probably still don’t pronounce correctly, and I’m sure I will always pronounce them wrong.

 

Naming a manufactured car probably goes through a number of tightly guarded secret meetings, sketch ideas, advertising thoughts, and a whole lot of thinking before they actually place the name badge onto the car or truck. You’d think with all the resources they have at their disposal, every contingency has been covered, every angle has been looked into, and no stone is left unturned in the search for the perfect name for their next assembly line creation. You would think so wouldn’t ya? Well, sometimes somebody slips up, goofs, or forgets to check what their latest named drawing board creation means in another language. Some of these names can end up with some very embarrassing results. Here’s a few.

 

Nova – In Spanish it reads as “no va” (two words) a loose translation means, “No go, or will not”

 

Parisienne – In French it means, “French lady from Paris”.

 

Fiera – In some Latin American countries “Fiera” means, “Ugly, old woman.”

 

VW Jetta – In Italian the letter J is rarely used. Meaning that in some dialects, especially near Naples, the name is pronounced “Letta”. And that translates as “throw away”.

Mitsubishi Pajero – In Spain the Pajero is sold as the Montero. (Good thing) Pajero in Spanish is a crude word for masturbation.

 

Rolls Royce Silver Mist – Never heard of one? There’s a good reason why. Rolls Royce renamed the Silver Mist to the Silver Shadow just before any were sold. In Germany “mist” means “manure”.

 

Mitsubishi Starion – Originally Mitsubishi wanted to call it the Stallion, keeping up with their line of cars named after horses. However when the word “Stallion” is spoken with a heavy Japanese accent it is pronounced “Starion”. Instead of sending any paper work about the official name to the factory making the name badges, it was done by phone, and yes, in Japanese of course. The name plates were manufactured and installed onto the cars before anyone spotted the error. The name literally, and figuratively, is stuck to the cars now.

 

Pinto – When Ford decided to market the Pinto in Brazil they had to perform a hasty name change. In Brazil, the word “pinto” is the slang nickname for the male member.

 

Toyota MR2 – Who could be offended by a name such as MR2? Well the French it would seem. When spoken, “MR2″ would be pronounced “me-re-de”, or in translation s**t. Toyota’s practical solution. Remove the “2” from the name badge for all the French marketed cars.

 

So what’s in a name? Sounds like quite a bit. There’s a name for every car out there, some good some not so good. And, I’m sure they’ll be hundreds more movies, songs, and books written about a certain named car in the future. Whether it’s a little, bitty 3 wheeled car, or a gigantic 18 wheeler there’s a name that fits the personality of the vehicle and its owner. When it comes to our contraptions, exotic rides, or just the plain everyday around town cars… you can be sure of one thing…, you can call it anything you’d like, because it really is… all in the name.

 

 


View full article

  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics



  • Our Sponsors

×
×
  • Create New...