Quantcast
Jump to content

Have A Great Day --- Yea, there really are great days in the business, we just tend to dwell on the bad sometimes.


Recommended Posts

Posted

Have a Great Day

 

 

I've seen mechanics, service writers, (and me) get upset over the stupidest things. Everything from each other, customers, the wrong parts showing up, stubborn bolts that won't turn,to "Who used the A/C recovery machine last and didn't bother to fill it backup?!" Things happen, and sometimes we should just let it go, and not let it raise our blood pressure to the boiling point.

 

 

 

Sometimes it's best to remember those days when every repair and every customer situation went off without a hitch, and to remind ourselves there is a lot more of days like this than we care to admit. But, like a lot of hardened veterans of the wrench world we tend to see nothing but the gloomy side of the repair business. It's the car problems,or a few goofy explanations about those problems, and then we have to sort the mall out with logical explanations. This usually puts us (mechanics) in a mood where we tend to believe everyone around us must either be incompetent or lacks trust in our abilities. I wouldn't doubt that police officers,paramedics, or firemen develop a certain attitude when confronting the next traffic situation, drug dealer, or burning building. It's part of the make-up of the job. Not that anyone ever started out in their profession that way; it's something we all developed after years of experiences from countless situations.

 

 

 

Sometimes, it's a good idea to just take a step back, no matter what's going on, and just have a great day. Put a smile on that old mug and say thank you and good morning to everyone you meet. Take the time to say, "Hi, how are ya?" to the mail person, the guy in the next bay and so on. Maybe it's the little extra time you take to say, "And, how are you?" back to the teller at the bank drive up window when they greet you with their customary introduction.

 

 

 

Maybe spreading some of that old fashion common courtesy would be in order too. Opening the car door for the Mrs. or rushing to the restaurant door only to hold it open for the couple behind you. Some of us do all that and more without even thinking about it. But, there are many of us who need to be reminded about it. I fall in that category of; "needs to be reminded" more often than I'd care to admit. At times I do, and other times, I wish I would have thought to be more courteous before going on my own thoughtless way.

 

 

 

There are days at the shop when all the money in the world doesn't add up to the joy of doing a good job and the admiration from the customer. If I had to put it in other terms, it would be like an actor on stage. They do their craft for the applause at the end of their performance. That simple act of acknowledging a job well done makes all the difference in the world to them. Similar acknowledgments do happen at the automotive service counter as well just not in the same way. At least I haven't had a customer stand there and applaud over an oil change… yet, but they do show their appreciation in other ways, and quite often.

 

 

 

Over the years I've witnessed some of the generosity people have for their automotive repair person firsthand. From cookies and cakes brought in by an appreciative customer, to showing up announced just to say Hi. Once in a while it's tickets to a ball game,and others it's something they know I would probably would be interested in. I've even had a customer come in and present me with a handmade ball point pen. (Really cool pen by the way) and I've had an older gentleman bring my wife's flowers on her birthday. (Thanks for the reminder... I almost forgot that year.)

 

 

 

Ya just never know, obviously, we do touch our customer's personal lives with our efforts. And for that we should all be grateful. It's not the kind of thing you think of when you make the decision to go into the automotive repair business. It's something that happens because you are doing a good job in business and touching so many lives. Great customers are like my extended family,and I'm glad to call them a part of it. Maybe as the shop owner, the technician, or the service writer, maybe,we should all stop what we're doing and applaud our customers. They're the real stars of our world.

 

 

 

So, no matter the faults or misconceptions of car care, it's a good thing to be a part of it. Because, like a lot of us in the business of fixing cars even though we may not outwardly show it, we really do care. Yes, we need your business and your support;we appreciate it even though we may forget to say so. Sometimes we all need to be reminded of not what we do, but how much what we do effects everyone around us. So if you haven't already, now is a good time to start... mechanics, technicians, and everyone else out there.... Have A Great Day.


View full article

Posted

My wife said she liked this story....cause I wasn't bitchin' I don't know how it happened cause I'm always bitchin' about somethin'

Posted

Gonzo,

THANKS

I really needed a little perspective today. Been having some personality conflicts in the shop, everyone is in a little bit of a mood, a couple of jobs not going to smoothly. I'm sharing this with everyone to hopefully change our moods a little bit.

Thanks again,

Russ

  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Drivi
      Hey everyone,
      I'm building a tool that helps auto repair shops plan preventive maintenance automatically — it predicts when each customer should come back, sends reminders, and helps keep the shop busy year-round.
      But before I go any further, I’d rather hear it from real shop owners:
      How many hours or bays do you usually have sitting empty every month?
      What percentage of your work is planned maintenance vs emergency jobs?
      Do you use any system right now to remind customers about service? How well does it work?
      What would make you not trust an AI system that claims to schedule customers automatically?
      I’m not here to pitch vaporware — I want to understand how shops actually think about preventive work and downtime.
      If a few of you are curious, I can share a short demo and would love your honest feedback.
      Thanks for sharing your experience — it’s worth way more than any market research report.
    • By nptrb

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Hands On
      The emailed me a form to sign up to be a "service provider" The company Service Up will send me the client. They will bill the client and pay me after the repair. Look at some of the highlights from the terms:
       All transactions completed through the Platform are subject to a transaction fee ranging from 1.99% to 10% of the gross amount of each repair, with a baseline marketplace fee of 3.99% unless otherwise specified in a fleet-specific addendum.
      The marketplace fee applicable to a given repair is one of the following:
      • 3.99% (baseline) of the gross amount of all repairs completed through the Platform for all other customers, including customers to whom ServiceUp has referred you.
      • A rate specified in a fleet-specific addendum, which overrides the baseline, provided such rate falls within the 1.99%–10% range stated above.
      In addition to the marketplace fee, the following optional fee may apply:
      • QuickPay fee — an additional 3.50% of the gross amount of the repair if you elect to receive early payment (typically next business day). In the event a credit card is used by the customer for payment, the 3.50% QuickPay fee will be automatically applied.
      So, the fee they charge is any where from 1.99% to 17% if they pay credit card and you want funds next day
      Company reserves the right, in its sole discretion, to modify, increase, decrease, or otherwise change the transaction fees, early payment fees, or any other amounts payable under these Terms at any time. 
      But those fees could go up with no notice at all
      The Company shall remit payment to you net of any applicable transaction fees as promptly as practicable after, and contingent upon, Company’s receipt of payment from the applicable fleet customer for the services rendered by you. 
      They will pay you for the work you did, as long as they are able to get paid.
      You acknowledge and agree that the Company shall not be responsible for any delays or failure to pay that may be caused by a fleet customer.
      And if the customer fails to pay them, too bad.
      You further acknowledge and agree that (i) the Company may withhold funds in the event of any dispute between you and the Company pending the resolution of such dispute, (ii) you shall not collect any fees for services rendered hereunder directly from a fleet customer and shall receive payment for such services solely from the Company, (iii) in the event the Company determines that you have violated the foregoing subsection (ii), the Company shall have the right to charge a penalty of 10% of the gross value of the applicable services and may withhold that amount from future payments or debit your bank account to recover the penalty and any applicable fees for services.
      AND if they customer fails to pay them and you go directly after the customer yourself, tack on another 10%
      So basically, you fix our cars, and we maybe pay you after we take fees.
      Has anyone used this platform? What do you think?
    • By Riccardo

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.



  • Our Sponsors

×
×
  • Create New...