Quantcast
Jump to content

Recommended Posts

Posted

Bill Clintons was consensual between himself and another woman. The allegations against Herman Cain are not consensual and he used his position in the company(ies) in an attempt to force women to partake in inappropriate activity with him. Sounds like a scum bag to me if everything ends up being true, but he will never admit it during his campaign. More then likely the statue of limitations would have ran over for the cases so we will not get any legal investigation.

 

If it doesn't end up being true, good luck campaigning Mr. Cain.

Posted

Politics and Religion... the two things that start wars and end friendships. But I'll have to agree with everyone... if you are going to be in the spot light... you BEST keep a clean slate. Crazy world out there ain't it.

 

+1

Posted

I disagree Joe. Everybody who reads the thread I assume is a mature adult. Everybody has their opinions on subjects. I don't see a reason why we cannot discuss.

 

To respond to previous posts. Yes, Monica Lewinsky had consensual sexual encounters with the president on multiple occasions. She was not sexually molested, raped, or advanced towards without her consent. What Clinton did was not illegal, but it was unethical. If I recall, Clinton got hammered pretty heavy from the media during this entire fiasco and it still tarnishes his reputation. Along with the Paula Jones ordeal.

 

The allegations against Mr. Cain are based on non-consensual encounters, and they are backed by "settlements" (or agreements as he has stated) for the women to leave the company to keep them quiet (by 2 women). Of course this is all just alleged, and like I said, it happened so long ago their will not be a criminal investigation because it did not deal with murder.

 

The last I heard 5 women have came out against Mr. Cain with allegations. Are they all true? Probably not. Like with what happened with Clinton, you have people jumping on the fame wagon for their 15 minutes and possibly some money if they can get it.

 

With that being said, from what I have seen of Cain in the debates and interviews, I believe he will not win a nomination, and certainly not the presidency. His rolling point to his campaign is a 999 plan which we are not even sure if it will raise enough revenue to even fund the government at current levels or even near the current levels. His campaign has not even released a full plan for economists to study. I really get involved in government revenue and economic growth plans because I am a licensed 7-12 Social Studies teacher and am permitted by the state of Ohio to teach courses in economics. Heck, I just enjoy politics in general.

 

And what "media biased" are you referring to? I watch commentators on Fox News all day long stretch truths, tell lies, and blow issues out of proportion when they concern democrats, and I see the same with MSNBC when it concerns Republicans. From just basic observation, it seems that the Republican party does setup our candidates to become targets by the left media. For some reason the GOP is hell bent on campaigning on family values, christian faith (as if their are no christian dems?), common sense, and morals. So when they slip up, the left media has a field day with it.

 

How is the media in your area? In North east ohio, all we really get on the radio is strong right wing conservative stations, and our newspaper (Akron Beacon, Plain Dealer) are pretty liberal, but I wouldn't label them far left, but they push it sometimes.

 

I guess to sum up my lengthy rant (which it wasn't intended to be, it just ended up that way), I am little disappointed in the GOP candidates in general. I don't see a real strong political candidate that the public is going to feel they can trust and support. It is going to end up being Newt or Mitt. Newt is too far right, and the media will eat up Romney because he is mormon and has changed his stance on many topics recently (the whole flip-flop ordeal we seen with John Kerry).

 

And to play devils advocate, why are some willing to give Herman Cain a pass on his allegations and take them lightly, but the same isn't happening for the Penn State coach? Is it because the right wing media is willing to brush off what Cain MAY have done simply because he is a republican candidate and the Penn State Coach is a public employee so he gets no get of jail card? If you ask me, they are both sick in the head if these allegations are true for either party, and the lord has a special place for them when their time comes.

Posted

I am sick of the double standard in this country. Clinton admitted he lied to the American public and did have affairs while he was president. BUT, the media and liberals stood behind him saying, “You have to separate what he did from his presidency”. The liberals made excuses for him, forgave him gave him the customary “liberal double-standard pass”

 

Now we have Herman Caine, who has been accused, not found guilty, but accused, and the media is having a field day with this. Why? Because he is a conservative republican. That’s why. Whatever happened to innocent until proven guilty? Why is Herman Caine being judged by the media based solely by accusations!

 

And, even if Herman Caine is guilty, Why was it OK for Clinton and NOT ok for a Republican???

 

There clearly is an agenda in this country where the left can do no wrong and the right needs to walk a fine line and tip toe through a political mine field.

 

Joe, I am with you about being sick of the double standards. But I see things differently. I see the republicans giving Cain a pass, and then dredging up Clinton. As I remember your buddy Newt was a vehement proponent in the get Clinton campaign that was the circus in congress about impeaching him. Was Clinton wrong? Absolutely, and his legacy is still tarnished by it. But Newt was a huge push behind impeaching Clinton over his indiscretions, sure the umbrella the republicans used was the lying under oath, but what was the the impetus that solicited that lie? It was Newt and his buddies pushing and pushing to try and disgrace the President. And then afterwards what do we find out, Newt was a multiple philanderer. Talk about the pot calling the kettle black. And talk about double standards.

 

Now from your political posts I know you to be a right-winger. And I lean slightly left of center but have an eye towards fairness and equality. Why is it that the republicans were and are again all up in arms about Clinton but want to give a pass to Cain? Double standards. I see it almost everyday in political stories in the media. The republicans did, but that was OK. The democrats do but that is a mortal sin. Double standards every day. And yes it works with both parties, but as of late the neo-cons have amnesia about their past behavior and are screaming about anything the democrats want to do.

 

Mr. Cain visited Traverse City, and one of the tea-bagger city commissioners was quoted as saying he hoped no one brought up the sexual harassment issue because that would be "inappropriate." But where was that understanding when Congressman Weiner was being forced out of office? And this city commissioner was also quoted as claiming the harassment issue was "essentially a he said, she said..." issue. Excuse me, with Clinton it was an it said that she said he was enjoying her favors. Maybe coerced at first, but still consensual. With Cain it is a she said & she said & she said AND SHE SAID coercive situation. Similar, maybe, different, VERY, pertinent, somewhat but not as important as other issues.

 

Personally I really don't care what happened in the '90's in these guys lives. What I care most about is what they are going to do TODAY. But the republicans only care about hammering the democrats about their past and crying because it's not front page above the fold in every newspaper everyday until they come up with another faux crisis. And they also cry foul and double standards when the media and the democrats do exactly the same thing, to the same degree to republicans. There is a clear double standard, and it lies prominently with the republicans. Hammer them and treat us with kid gloves.

  • 2 weeks later...
Posted

It sounds like Mr. Cain may be dropping out of the race soon (after he discusses it with his wife, according to the local radio).

 

Partisan politics in general are just dirty. Candidates such as Buddy Roemer will never get attention because they want to limit the influence ($) that businesses, unions, and social/economic groups have on elections.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Drivi
      Hey everyone,
      I'm building a tool that helps auto repair shops plan preventive maintenance automatically — it predicts when each customer should come back, sends reminders, and helps keep the shop busy year-round.
      But before I go any further, I’d rather hear it from real shop owners:
      How many hours or bays do you usually have sitting empty every month?
      What percentage of your work is planned maintenance vs emergency jobs?
      Do you use any system right now to remind customers about service? How well does it work?
      What would make you not trust an AI system that claims to schedule customers automatically?
      I’m not here to pitch vaporware — I want to understand how shops actually think about preventive work and downtime.
      If a few of you are curious, I can share a short demo and would love your honest feedback.
      Thanks for sharing your experience — it’s worth way more than any market research report.
    • By Hands On
      The emailed me a form to sign up to be a "service provider" The company Service Up will send me the client. They will bill the client and pay me after the repair. Look at some of the highlights from the terms:
       All transactions completed through the Platform are subject to a transaction fee ranging from 1.99% to 10% of the gross amount of each repair, with a baseline marketplace fee of 3.99% unless otherwise specified in a fleet-specific addendum.
      The marketplace fee applicable to a given repair is one of the following:
      • 3.99% (baseline) of the gross amount of all repairs completed through the Platform for all other customers, including customers to whom ServiceUp has referred you.
      • A rate specified in a fleet-specific addendum, which overrides the baseline, provided such rate falls within the 1.99%–10% range stated above.
      In addition to the marketplace fee, the following optional fee may apply:
      • QuickPay fee — an additional 3.50% of the gross amount of the repair if you elect to receive early payment (typically next business day). In the event a credit card is used by the customer for payment, the 3.50% QuickPay fee will be automatically applied.
      So, the fee they charge is any where from 1.99% to 17% if they pay credit card and you want funds next day
      Company reserves the right, in its sole discretion, to modify, increase, decrease, or otherwise change the transaction fees, early payment fees, or any other amounts payable under these Terms at any time. 
      But those fees could go up with no notice at all
      The Company shall remit payment to you net of any applicable transaction fees as promptly as practicable after, and contingent upon, Company’s receipt of payment from the applicable fleet customer for the services rendered by you. 
      They will pay you for the work you did, as long as they are able to get paid.
      You acknowledge and agree that the Company shall not be responsible for any delays or failure to pay that may be caused by a fleet customer.
      And if the customer fails to pay them, too bad.
      You further acknowledge and agree that (i) the Company may withhold funds in the event of any dispute between you and the Company pending the resolution of such dispute, (ii) you shall not collect any fees for services rendered hereunder directly from a fleet customer and shall receive payment for such services solely from the Company, (iii) in the event the Company determines that you have violated the foregoing subsection (ii), the Company shall have the right to charge a penalty of 10% of the gross value of the applicable services and may withhold that amount from future payments or debit your bank account to recover the penalty and any applicable fees for services.
      AND if they customer fails to pay them and you go directly after the customer yourself, tack on another 10%
      So basically, you fix our cars, and we maybe pay you after we take fees.
      Has anyone used this platform? What do you think?
    • By JustTheBest

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By HeneryH
      I know this sounds like spam but hear me out.  I am a software nerd who had a few weeks of downtime recovering from a surgery.  I used that downtime to learn about how AI can be used to create applications.  The test scenario I used was an auto mechanic shop that had to manage 5 service bays.  I got the idea from my local mechanic who uses one of those physical desktop paper calendar planners.  He pencils in appointments literally on the paper calendar.
      My goal was primarily to learn about how AI can generate the apps.  That is done.
      Now I have this app that is kind of done.  I am not in the business of selling apps.  I have no interest in that.
      I am posting here because it would be a shame to throw it away.
      I will post the application that the AI helped me generate as an open source software that is completely free to use.
      If you would like to participate in helping with the business logic (I am only guessing as to how shops operate) then I can make any updates that you all suggest.  I can probably host about five shops on my home server if you want a clone instance of the app for your shop.  Or you can take the code and run it for free on your own computer. I can help you do that.
      I am doing a little more polishing tonight and will post links and screenshots for anyone who wants to try it out.  Assuming this thread is not deleted by the mods.

      I'm not selling, just want the small personal satisfaction of someone actually using it if they like it.

      This is the prompt I gave to the Claude AI system:
       
      Claude generated a system that was about 90% of the way there but it also helped me fix the remaining 10%.  As a sw nerd it it really amazing.   I would have taken a week or two to do this but with Claude it took me a day.
      Here is the link to the demo system:  https://demo.flynnconsultingllc.com/
      There are three personas that the system uses: 
      * Manager of the whole shop who assigns scheduled cars to bays
      * Bay Lead who manages the bay o bays in his control, bringing queued cars into active and statusing them
      * Customers who can schedule service for their cars

       





  • Our Sponsors

×
×
  • Create New...