Quantcast
Jump to content


Gonzo

Gonzos Tool Box @ Babcox Media

Recommended Posts




  • Similar Forum Topics

    • By Joe Marconi
      At the end of each year, it's typical of tool reps and salespeople to give you tax advise. Often they will tell you that buying tools and equipment can be used as a way to lower income taxes. While this may be true, no one has a better handle on your financial situation that a good tax accountant.  Listen to the expert, not the tool truck rep.  Spending money to save on taxes also reduces your cash flow.  I am not an accountant, but sometimes its better to pay a little extra in taxes and maintain a cash reserve. 
      Your thoughts?  
    • By ratchetandwrench
      Does your shop use a chatbot on your website, or do you have a chatbot on your Facebook page? 

      If so, what has your experience been like? 
    • By JustTheBest
      Wanted to share this information with everyone here! I know, I know, scams are nothing new - but it never hurts to remind you how close they actually are. 
      Hope this helps!
      Matthew Lee
      "The Car Count Fixer"
      Join me on YouTube to Tips, Weird Hacks and Dirty Little Secrets You Can Use RIGHT NOW To Grow Your Car Count, Income and Profits!
    • By DUFRESNES
      I NEED HELP.  I have been in business 48 years.  We had our best year ever, finally over 1 million in our small shop. I have always prided myself on our reputation.  We recently had a vehicle that had a drain plug not put back in and in return the engine went bad.  We replaced it with an engine with fewer miles. Both engines her old one and the replacement needed a timing belt.  The customer originally agreed to pay $650.00 for a new timing belt reduced price, when we put the engine in.  Finished the job and then she didn’t want to pay. We eventually said fine just pick up the car. We had asked her to sign a confidentially agreement because she had her son, sister, ex-husband and uncle  come in yelling.   She has turned us into the BBB which we have  A plus rating.  We responded with she could pick up the car anytime for Zero dollars.   We are being pounded in social media website NEXT DOOR.  It is like a snowball going downhill getting bigger and bigger.  Can’t get it to stop.  I responded on the site.  I didn’t do a he said she said.  I just laid out the facts.  I know people read what I had to say and appreciated it.  I even had a person stop in and say it took a lot of guts to respond like I did.  But he couldn’t say anything because he is a business owner and didn’t want to be attacked for it.  With all that being said we have many wonderful customers.  We have 667 five start reviews with only 8- 1 star reviews.  I know I am not the first person to be attacked like this on social media.  Any ideas would be much appreciated. If interested attached is my reply that went on the neighborhood site.   You can even call me.  503 646 2940 

      randi gant.docx
    • By Gonzo
      Ouija Board Diagnostics
      I’ve often wondered why a lot of the driving public believes auto repair is something for non-thinking Neanderthals that have no ambition to do anything else in life.  For all I know they think we (us mechanics that is) diagnose every problem by breaking out a Ouija board, while humming some ancient automotive chant. It could also be that a good mechanic just makes things look easy to the unaware and uniformed layman. With the right mechanic the whole thing can seem effortless, easy, and somewhat second nature when it comes to diagnosing a problem. To the armchair mechanic sitting at home watching the next new automotive reality show, it’s either – “Repairs are a no-brainer, I can do that”, or it must be some sort of Ouija board magic.
       Mind you, the number of individuals who still believe anyone can be a mechanic is dwindling ever so slowly.  Mainly because the car itself has gone past the point of parts swapping and a shade tree mechanic’s ability to repair the modern car.  It’s no secret good old dad with the typical box of tools from a discount chain store can hardly change a spark plug anymore, let alone find them. Oh sure, you can still do a pad slap at home, and you can probably toss on a set of shocks, replace a bulb or two, but diagnosing a problem, especially one that involves some form of electronics… well… that’s a whole new issue to deal with.
      It could be they need to master the Ouija board diagnostic scenario, or they need another round of You Tube videos.  Every mechanic has undoubtedly heard the same thing from a well-seasoned You Tuber, “Oh I could have done that.” This usually leads to an even longer explanation of how you’ve done the entire repair wrong, but put the tools in their hands, and the results are pretty consistent.  The car is either incorrectly put together, or they’ve lost some parts between point A and point B. Videos are great, but you still need to have some mechanical dexterity.
      A good example of this scenario is when I was teaching a brake shoe replacement class the other day.  After explaining the type of brake system we were working on, I removed the brake shoes from the car.  Next, I reinstalled the same shoes, slowing down just enough so they could see how to use the brake tools. It probably took all of 20 minutes to explain it in detail and install the shoes. All the heads were bobbing and the usual consensus was they all had this repair procedure down pat, because, as we all know, anybody can do brakes.  Well, as if it was no surprise, when the students got their hands into the job all I heard was one cuss word after another and the occasional student chasing a bouncing spring or clip across the shop floor. So much for easy, aye?
      So, where do most of these unprofessional type mechanics and couch connoisseurs of the automotive world go for any information?  Where else, the internet. The one place that doesn’t check the credentials of the person making the video, and the one place where anyone with a box of tools can be a superstar with a wrench. In their video they’re the automotive expert, camera man, sound man, director of content, and editor all at the same time.  No need in researching the facts, looking up the proper methods, or any other various procedures, service bulletins, or the latest tools related to that particular job. I wouldn’t be surprised if there’s a video out there with a couple of guys surrounding one of those Ouija boards asking why the short fuel trim is higher on one of side than the other.
      Ouija board or not, there are a few draw backs to internet information, but there really are a lot of super fantastic guys and gals putting out some very helpful videos on car repair.  It’s just the few home brewed videos that make me cringe. Some of these back yard magicians seem to consult their Ouija board way too often. As if they conjured up some miracle answer right on the spot. Honestly, some of these videos are about as reliable as fake news. But, then again… that’s what some people think the professional mechanic does every day.
      As there has always been, and there will always be, a shortage of trained technicians out there able to handle the job of repairing the modern car.  I’m very sure we will never see the day when there is an overabundance of good mechanics who have to change careers because there is no room for them under the hood.  It’s never going to happen. What does need to happen is the one thing consumers don’t want, and that’s cost of repairs most certainly need to rise, as well as the mechanics’ wages to keep up with all of these technical advancements. It’s not a maybe, it’s a must or the technology will run right past you.  Ask any mechanic what they learned on a vehicle from 10 years ago vs. today’s cars, and you’ll find that nearly half of what they did back then isn’t applicable in today’s diagnostic procedures.
      To be a good technician these days takes a lot of training, a lot of time spent reading, and understanding the latest technologies. New information comes from the manufacturers’ engineering departments just as fast as the cars come off the assembly lines, and to stay on top of things you need to study. I’ve heard people tell me, “Yea, I went to an automotive tech school to be a mechanic, but I didn’t learn anything.”  Seriously?  I’m sure you learned a whole lot.  The problem isn’t the school training, the problem is you.  Training doesn’t stop with your diploma, it stops when you stop wanting to advance your knowledge in the repair industry. School is a starting point, but to be a modern mechanic means you need to stay focused on the technology, take advanced training classes in your field of choice, and not expect answers from a You Tube video or your Ouija board.
      There’s a lot to learn and retain.  It’s not a trade where you learn one method and expect that skill to last you throughout your career.  It’s an ever changing industry with ever changing technology. Learn the basics, then learn to diagnose the modern car.  You can’t guess at a solution or consult that old Ouija board for the answers.  It takes practice and a lot of hands on from a dedicated individual willing to get their hands dirty and diagnose an automotive problem.  Then solve it correctly. Sorry, no Ouija board diagnostics allowed.   

      View full article
  • AutoShopOwner Sponsors



×