Quantcast
Jump to content


Do you charge or not charge in this scenario?


Recommended Posts

Your technician performs an oil change or state inspection and finds a side marker light bulb out.  The CSA gets approval from the customer to replace the bulb.  The technician performs the labor to gain access to the bulb.  The technician finds that water intrusion has caused damage to the socket.  The CSA notifies the customer but the customer declines the service.  Do still charge for the labor portion of the originally approved bulb service as this was already performed but the bulb was not replaced?  Do you not charge anything at all because the issue was not resolved?

Link to comment
Share on other sites

This is one of those things you will come to learn through experience.

I charge it, but before you make any decisions let me tell you how is it that I have arrived at my position. -How well do you know this customer? I have learned through experience that a light bulb out, is not always just a burn light bulb. Teach this to your Service Advisors, and techs, although techs should already know this. I learned early on that Mercedes and BMWs would suffer from defective sockets, VW, Fords, whatever. So before you offer and service, make sure you have an idea of what the worse case scenario can be.

So, in this particular case, I would have had the tech check to make sure it was only a bulb that was needed before calling the customer or would have told the customer that a light was out and we didn't if it was a burn bulb, fuse, or socket. That way you would have not surprised the customer if he declined the repair.

So depending how good this customer is, and how well I know them, I would charge them for the install and tell them I would give them a credit when they want return for the complete repair. The point is, you want to keep the customer if he is worth it.

  • Like 1
Link to comment
Share on other sites

Thanks for the replies Joe and Harry.  

To answer Joe's questions:  The vehicle was a new vehicle with low mileage.  The customer suspected that it might be covered under warranty and wanted to take it to the dealer to verify.  It was a first time customer who had no previous work history with our shop.  The job was sold with the assumption that it was the bulb but upon further investigation by the technician, the socket had been damaged due to rain intrusion.  We charged for the bulb service labor but did not charge for the part/bulb itself as this would not have resolved the customer's issue.  

To Harry:  How do you typically sell/price a light that has gone out on a vehicle from an oil change/state inspection?  Typically customers want a price before committing to a service and the price could vary based off of all of the different reasons why a light could be out.  We typically sell with the assumption that the bulb itself has gone out unless we can see obvious damage.

Link to comment
Share on other sites

1 hour ago, 5 Star Auto Spa said:

To Harry:  How do you typically sell/price a light that has gone out on a vehicle from an oil change/state inspection?  Typically customers want a price before committing to a service and the price could vary based off of all of the different reasons why a light could be out.  We typically sell with the assumption that the bulb itself has gone out unless we can see obvious damage.

5 Star, I don't have to tell you, everything is about communication. Know your customer is not only good policy for the banking industry, it is the same with us. For example, the cashier girl is more price sensitive than the IT engineer guy. So, when you offer a service, leave it open to additional work that may be needed. We do this all the time, " Joe, you have a light out, could be the bulb, but sometimes the connector melts or corrodes, we will check it out, ok." My point is to always manage expectations to provide the best customer experience.

  • Like 1
Link to comment
Share on other sites

Thanks for the reply Harry.  In that scenario you just mentioned, what do you charge the customer to "check it out"?  Is that service complimentary?  Do you charge for "checking it out" if the customer declines the service once you have told him what he/she needs to fix the issue?

Link to comment
Share on other sites

44 minutes ago, 5 Star Auto Spa said:

Thanks for the reply Harry.  In that scenario you just mentioned, what do you charge the customer to "check it out"?  Is that service complimentary?  Do you charge for "checking it out" if the customer declines the service once you have told him what he/she needs to fix the issue?

Hmm, I don't follow the question. Are you setting me up? :)

Well, I have to know what's it I am selling, so yeah complementary to check it out. But if I have to diagnose an electrical issue, I give the customer a preliminary estimate before we teardown. Again, know your customer. Keep in mind, there are opportunistic people that will not buy from you, but get anything you give them for free. ( I am sure you know this, but I am being verbose for the young guys that are learning the ropes.)

Edited by HarrytheCarGeek
a word
Link to comment
Share on other sites

Like Joe says, there is a lot of gray areas with issues like this in the business.  Like most of the other reply's here, a lot of it has to do with how you present it to the customer.  It's not totally clear from your post, but it sounds like your CSA presented the issue "bulb out"  and the solution "replace bulb" and the cost.  The customer agreed to the "cost" to "solve his issue".  So if the "issue" is not resolved, you cannot fault the customer for not wanting to pay the "cost".  A lot of customer's will understand, but it is not unreasonable for a customer to see this as unfair.  Now, if you state to the customer, "you have a bulb out and we need to start by finding out why, and that will cost x and if it is just a bulb, it will only be x", what you are selling them and what they agree to are very different.  That way there should be no conflict getting paid for it as you should. 

 

Scott        

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Transmission Repair

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By nptrb

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By carmcapriotto
      The Weekly Blitz is brought to you by our friends over at Shop Marketing Pros. If you want to take your shop to the next level, you need great marketing. Shop Marketing Pros does top-tier marketing for top-tier shops.
      Click here to learn more about Top Tier Marketing by Shop Marketing Pros and schedule a demo:https://shopmarketingpros.com/chris/
      Check out their podcast here: https://autorepairmarketing.captivate.fm/
      If you would like to join their private Facebook group go here: https://www.facebook.com/groups/autorepairmarketingmastermind
      In this podcast episode, Chris Cotton from Auto Fix Auto Shop Coaching underscores the significance of professional attire in the auto repair industry. He connects dressing well with increased confidence, employee morale, and customer trust. Cotton shares personal anecdotes and cites studies on "enclothed cognition," reinforcing the idea that appearance can influence performance. He offers practical advice for shop owners to elevate their business's professionalism through attire, leadership, and delegation. Cotton concludes by advocating for a standard of respect and dedication in the industry, supported by the episode's sponsor, Shop Marketing Pros.
      The importance of dressing professionally (00:01:15) Chris discusses the impact of dressing professionally on business perception, employee morale, and customer confidence.
      The psychological impact of dressing well (00:03:22) Chris explores the psychological connection between dressing well and feeling better, projecting confidence, and improving performance.
      Supporting data on the importance of dressing well (00:05:33) Chris presents data on perception and trust, employee morale, and customer confidence related to professional appearance.
      Setting a new standard (00:06:45) Chris provides practical tips for setting a standard of professionalism, including investing in quality uniforms and leading by example.
      The role of the owner in dressing professionally (00:07:49) Chris emphasizes the role of the owner in creating a culture of professionalism and setting boundaries through professional attire.
      The pledge to elevate industry standards (00:11:15) Chris encourages listeners to join him in pledging to dress professionally, reflecting respect for themselves, employees, and customers.
      Connect with Chris:
      [email protected]
      Phone: 940.400.1008
      www.autoshopcoaching.com
      Facebook: https://www.facebook.com/
      AutoFixAutoShopCoachingYoutube: https://bit.ly/3ClX0ae
       
      #autofixautoshopcoaching #autofixbeautofixing #autoshopprofits #autoshopprofit #autoshopprofitsfirst #autoshopleadership #autoshopmanagement #autorepairshopcoaching #autorepairshopconsulting #autorepairshoptraining #autorepairshop #autorepair #serviceadvisor #serviceadvisorefficiency #autorepairshopmarketing #theweeklyblitz #autofix #shopmarketingpros #autofixautoshopcoachingbook
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors



×
×
  • Create New...