Quantcast
Jump to content

Recommended Posts

Posted

Just signed up for Bolt On Technology Mobile Manager and Pro Pack (Report Pro, Message Manager, Lube Sticker Pro). Got Mobile Manager installed on 4 new tablets for the technicians. Installed Pro Pack on both desktop computers running All Data Manage as the shop management software. Received training on Lube Sticker Pro and have scheduled training on the other 3 modules. Bolt On only trains 1 module at a time which kinda sucks because based on that we will not be up and running for an entire month. I have began to look into the SOP's and configure the software myself instead of waiting for training. For all of the shops that are using Bolt On, is there anything that you would recommend us definitely look into / try? I

  • 3 weeks later...
Posted

Mr. Kim,

First, I must apologize for the delay in responding to your post. I only recently became aware of it. We at BOLT ON TECHNOLOGY have found that when the majority of shops attended a 90-minute training session on our entire Pro Pack software all at once, it became overwhelming. As a result of that, many shops were not using our software to its fullest potential. We listened carefully to what our customers were telling us and developed a new comprehensive Webinar Training Program. This new program breaks down trainings by each individual product, allowing your shop the opportunity to start using what you’ve learned, before introducing another product.

 

It sounds like your shop is the exception to the rule and is very tech savvy. For any other shops that might be reading this post who are also tech savvy, please feel free to discuss with our Customer Experience Team, the training style that would work best for you. Our goal is to support all of our customers and their individual needs.

 

If you have completed all of your individual product trainings, you are entitled to a one on one training with our Product Specialist. This training will speak to any questions your specific shop has about the use of the products in your shop. If you have not already scheduled this training, please contact the Customer Experience Team at 610-400-1019 as soon as possible.

 

Please reach out at anytime if we can be of any further service to you or your shop.

 

Posted

Mike,

 

Thanks for the response. I made it through training and it was informative. I had already setup everything prior to training though because I did not want to wait an entire month to start using the system. I've had some issues/bugs with the system that I have called in to try and have resolved but I am still waiting for a response from the development team. I was told that it typically takes 2 weeks to have issues resolved, is this correct?

Posted

Mr. Kim,

 

Your feature request for Report Pro when prompted to enter a customer's e-mail, to save in ALLDATA is actually completed and will be released sometime next week.

 

Your second feature request when looking up an invoice number to find invoice in Report Pro, is a much more involved feature request that is not available at this time and has no estimated time of completion. We will continue to keep you informed via email every time a shop votes for your request and you will be notified where we are in the process via email.

 

We are constantly striving to improve our technology and thank you for your input.

 

Hope you have a great weekend!

Posted

We will continue to keep you informed via email every time a shop votes for your request and you will be notified where we are in the process via email.

 

 

That's a really cool feature. Too many times you submit an enhancement request with other companies and never hear anything back.

Posted

Thanks for the reply Mike. I think you might be looking at the wrong issues that I was having. I emailed a list over to the support rep that picked up the phone and none of those issues have been resolved thus far. The issues you were referring to were fixed by the development team earlier though.

Posted

Mr. Kim,



I am going to have Mike, your Account Manager give you a call shortly to help clear up any confusion. I also forwarded your July 8th email to our Customer Support Team, and instructed Mike to go over each of the 5 items you listed. This will get you answers faster than us communicating here on the forum.



We’ll do everything in our power to help get you what you need. Please let me know if I can help in any other way.



Have a great day!


Posted

Hello Mike,

 

Thanks for the quick response. My Account Manager contacted me immediately and let me know that if I have any future issues, to contact him directly. I did want to let any future shop owners that were thinking about adding Bolt On that we have gotten a glimpse of what the software is capable of, and it's definitely very exciting stuff. Once we get all of the bugs/integration issues resolved, I do think that the software could be a gem!

Posted
Hi Mr. Kim,


Thanks so much. I spoke to Mike your Account Manager and he informed me that you’re all squared away at this point. The additional features you requested have been added to our product improvement list, and once they’re completed we’ll send you a notification letting you know.


If you need anything else moving forward, please don’t hesitate to let us know.


Thank you, again.

  • 3 weeks later...
Posted

Hello Mike,

 

Could you have the support team contact me in regards to an issue we are having with Bolt On Message Manager? I have been sending emails but have not heard any response back thus far on the status of my issue.

 

Thanks!

Posted

Hello Mr. Kim,

 

Thanks for reaching out to me. I spoke to Mike G. your Account Manager and he is looking into your issue right now and Mike will be in touch with you very shortly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics

    • By jaybazzi
      I've came across this website a few times hirefrederick.com suppose to bring in return customers and fill in your gap appointment spots anyone ever try this? What's your thoughts on it? 
    • By mspecperformance
      Lets assume you are opening a brand new shop. You are not moving shops so you don't have a customer base to start with. To get off the ground running, what are some key marketing pieces, campaigns or elements you would implement (or have implemented).
       
      I'd love to hear your thoughts and ideas!
    • By brian61
      I am thinking of changing my internet advertising company. Has anyone used justthebestmarketing.com before and what kind of results did you get?
    • By babyhydro
      Hi everyone. I have a marketing idea I want to run past you all. I'm thinking about a Referral and Review program. How it will work is when someone refers a friend or someone leaves a review about their experience at our shop, they will be entered into a drawing which will be done live and saved on our Facebook page. Drawing will be for something like $250 cash for 2 different customers. Drawing held early December for extra Christmas money. What do you all think?
    • By Carl Spandau
      hello! i just opened a shop and am having a hard time gaining traction. im looking for some marketing techniques that work good for new business. i have tried social media and google add words with zero results. also are any of the social media marketing company's any good? the ones that call 20 times a day claiming to manage everything and create material for your pages. seems like the only people stopping by are the previous tenants customers and he did not have the best clientele. he marketed heavily discounted repairs, free estimates,  bring your own parts. everything i dont want. I would appreciate any tips to getting people into my shop
      my shop is a 4 bay with just me and my wife. very clean and remodeled with all the tools a shop needs except an alignment rack.
      thank you for your time!


  • Our Sponsors

×
×
  • Create New...