Quantcast
Jump to content

Recommended Posts

Posted

Background history for those who don't know my shop... We are a German Specialty shop and we work mainly by appointment...

 

New customer calls to ask for directions to the shop, ends up being a drive up no problem. Vehicle had a misfire. We didn't have a packed morning so I said we could see his car this morning. 2002 Mercedes C240. Says he got a diag at Pep Boys. Turns out they pulled his codes with some BS printout and the guy ended up paying $50. Felt bad for the guy told him he really shouldn't go to Pep Boys to get any diag work since they probably don't have the proper scanners to perform a lot of needed tests. Anyway get the guy in, explain to him (as per Joe's advice from the forum) that we would charge him to read the codes but we will charge accordingly as we go along with the diag process depending on what tests we need to perform etc.

 

Turns out that he had 2 faulty injectors after 1.5 hrs of diag time (only charged him $50 btw). Recommended to replace the 2 injectors as they were tested and were not working. I also explained to him that there might be other factors that could contribute to his misfire however we need to take care of the known bad components before we could determine if there was anything else to address. I went through this speech about 3-4 times with the same response from this Einstein, "So the injectors will clear my computer RIGHT?" At the end I got a little exasperated and I said, "Sir like I said 3 times before, we need to replace the injectors first then we can continue with our tests." Then the truth came out, "Well I just don't want to spend over $500 on this car otherwise I'll get rid of it and get a new car I don't want to deal with headaches."

 

After that nonsense I booked him to come back in the next day (because this fine gentleman just HAD to drive to work today with his misfiring vehicle).

 

Got a call from the customer about 2 hours later and the conversation goes something like this:

 

Customer: "Heyyyyyyy... I just wanted to know are your SUREEEEE there isn't anything else I need?"

 

Me: "not that i know of sir, we tested your injectors and they were found to be faulty. That is obviously your biggest issue, once we fix that we can move on to diagnose if there is anything else causing a misfire"

 

Customer: "Oh reeaaallllyyyy... well because I have a broken hose here."

 

Me: "Is it a coolant hose or an air hose or..."

 

Customer: "Air hose"

 

Me: "Ok sir well we weren't looking for an air leak because when we scanned the vehicle there were specific codes that came up for the injectors. We tested them and 2 of them were found to be faulty. If there was an immediate indication of an air leak we would have performed a smoke test. If you have a broken hose we can most certainly figure all that out tomorrow."

 

Customer: "Ok but I want to ask you something, can I stay around while you work on the car?"

 

Me: "... Yes you can wait around like you did today, it will take approx 1.5-2 hours to finish.."

 

::::Cuts me off while I'm talking::::

 

Customer: "No I mean can I watch you while you work on my car"

 

Me: "No sir, we don't allow customers in the work area"

 

Customer: "Ok then I can't have you work on my car I'll have to find someone else"

 

I already knew his line of questioning was getting me to admit to breaking his hose or take responsibility for a broken hose without coming out and saying anything directly. At this point I just want to get rid of this guy.

 

Me: "Ok sir thats no problem you can take your vehicle anywhere you'd like"

 

Customer: "Go and see if I can stand and watch you guys work"

 

THE EFFFFFFING NERVE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

Me: "No sir we don't do that. Good luck"

 

 

Hung up on him before I could get a response.

 

The balls on these people!!! I really think I should go back to my old policy of charging customers for every single little thing we do. It definitely helped to weed out these trouble makers. Does this type of situation bug you guys out as much as it does to me? We are very nice and courteous to customers. Honesty is part of our creed. We have a nice clean shop and one of the only true specialists in the area. I take offense big time to customers who want to accuse us of doing shady work or have shady practices.

 

Just needed to vent I'm sure it'll be fun for some of you guys to read and relate.



Posted

It's a page out of my book.... been there done that... never liked it..EVER!

Posted

I was cursed like a dog early Monday morning just to see if I'd fix a problem for free. So tired of dramatic customers. I can't help but take it personally!

 

Sent from my SCH-I605 using Tapatalk 2

 

 

Posted

The mistake that most shops make is they end up not charging these whiney custors yet never give the good customers a break. If a customer gets an attitude or rude, I charge them full price and ask them not to return. I believe that if someone acts like that then everyone they know already knows how they are so if they bad mouth you it will fall on deaf ears.

  • Like 1
Posted

We have all been down this road, and if there is one thing I cannot take is rudeness and how some people don't respect what we do. 

 

If you think about it, the first red flag was the fact that he took his MERCEDES TO PEP BOYS.

 

I am not putting down Pep Boys, but they "target low price, get it done cheap".  

 

Most of us do not operate like that, we offer the very best at a fair price.

 

Another lesson to take care of your profile customers, and let some pass you by.

How do you address it once their already your customer? Lol

 

Sent from my SCH-I605 using Tapatalk 2

 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By carmcapriotto
      Thank You To Our Partners The Institute, AutoFlow, AutoLeap, Shop Dog Marketing, In-Bound
      Watch Full Video Episode
      In our Episode Today:
      Listeners will recall the Pilot Talk (Episode 34) with Austin Brumfield - and this time our host Craig O’Neill welcomes Austin’s amazing wife, Evangela, to the podcast!
      Evangela is a pilot, an Airframe and Powerplant Mechanic, and a missionary.
      As mentioned with Austin, the Brumfields are joining Arctic Barnabas Ministry’s (ABM) which will take them and their aviation skills to the remote regions of Alaska.  ABM aims to support and encourage those who serve in Alaska, so they don’t decide to leave! 
      Since do leave after confronting hardship and the remote nature of Alaska- it becomes unlikely for people who cannot leave their remote communities to develop trust with any future newcomers.
      The Word of the Day:
      Barnabas:
      Proper Noun  
      Meaning:  "son of encouragement”
      In the conversation listeners will enjoy hearing Evangela share and reflect on a number of topics including:
      Her passion for the mechanics of aircraft - and the importance of the A&P license What it is like communicating with your Certified Flight Instructor (CFI) - when you are married to your CFI How speaking through the radio in a solo flight instills a sense of confidence What it’s like to speak in front of churches to raise support Why raising support for living in Alaska is nearly twice as hard as other missions Compelling details about the challenges of remote living and isolation felt by people in the remote regions of Alaska Airplanes as a bridge for communication Also airplanes in general.  We do talk a bit about airplanes… 
      Those who know Craig, know that when he entered college out of high-school - he wanted to become a missionary pilot himself.  Meeting the Brumfields later in life when he took up flight lessons in 2021 cultivated a new friendship and a new means to fuel that passion by supporting the Brumfields and welcoming them to share their story.
      At Speak Up - we believe stories adjacent to our industry prove to illustrate solutions for our day-to-day situations.  A key takeaway from Evangela is for us to remember to be proactive about being a Barnabas in your part of the world! 
      Don’t just wait to be called!
      And be prepared to go this distance necessary to support those who need support!
      We hope you’ll follow the Brumfield’s journey - details below!
      For more information on Arctic Barnabas Ministry - Check out their site:  here
      You can follow Austin and Evangela on Facebook, where they post their updates and newsletters by clicking here
      Evangela shared a  wonderful Youtube video that was produced recently regarding missions in Alaska. ABM serves some of the individuals in the video so it's a great way to visualize the people, places, and need for ABM in Alaska. You can watch it by clicking here.
      Thank You To Our Partners The Institute, AutoFlow, AutoLeap, Shop Dog Marketing, In-Bound:
      The Institute at WeAreTheInstitute.com.  "Stop stressing over your business, you deserve a good night's sleep. The Institute’s coaching helps you achieve success and financial peace.
      AutoFlow at AutoFlow.com. Your partner in technology, Autoflow consolidates your client interactions - before, during and after the visit to a single thread. Learn more at Autoflow.com
      AutoLeap at AutoLeap.com. Are you tired of juggling multiple tools to manage your auto repair shop? Say hello to the streamlined efficiency of AutoLeap, the #1 all-in-one Auto Repair Shop Management Software!
      Shop Dog Marketing at Shop Dog Marketing.com. "Want to see your auto repair shop thrive? Let Shop Dog Marketing be your guide. Our customer-first approach, combined with AI-driven creative content, ensures top rankings.
      In-Bound at CallInBound.com. Cover your communication needs and revolutionize your auto repair business with AI-driven call analytics from InBound.
      Contact Information
      Email Craig O'Neill: [email protected] Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters
      The Aftermarket Radio Network: https://aftermarketradionetwork.com/
      Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion. https://remarkableresults.biz/
      Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. https://mattfanslow.captivate.fm/
      Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. https://huntdemarest.captivate.fm/
      The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. https://autorepairmarketing.captivate.fm/
      The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. https://chriscotton.captivate.fm/
      Click to go to the Podcast on Remarkable Results Radio
    • By nptrb

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By stevefry
      I have a client looking to sell their Auto Body Shop in Monteagle TN called Lakeside Collision. He is asking $1,500,000 and the property did a little over $1,200,000 last year. Profitable business with lots of equipment and inventory, newer paint booth and includes 2 lots and 2 buildings with 8 bay doors.
      Also have another client looking for an Auto Body business to purchase in Davidson County (Nashville) TN. Looking for a shop with the business and the real estate. 
    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By MikesPlaceAuto
      Hello from Montana. Longtime mechanic/technician, first-time shop owner. Reaching out to many sources for information and advice. Small shop in rural setting, specializing in electrical and electronics. Thanks for any good words. Mike


  • Our Sponsors



×
×
  • Create New...