Quantcast
Jump to content


You are higher that the dealer!


Recommended Posts

The 2 CTS' I've had in my shop were both Leased vehicles. Of course, people who lease don't think they should have to perform any maintenance on their own dime. Your price is right in line with what it should be. There is no way the dealer would have been the same.

Link to comment
Share on other sites

I had a lady the other day, who drives a Caddy CTS, tell me the that our prices are higher than the dealer. We did a Mobile 1 oil change service (6quarts), checked it for a any needed service at HER request (all was ok), sold her a wheel alignment and 4 wheel balance because she was complaining of a hi-speed shimmy and that she has hit a lot of pot holes over the winter.

 

The price with tax; $202.56

 

How would you respond to this claim???

I always wondered.... why is it that "our" price has to be lower?? Who sets the standards?? the dealer?? Sometimes I think it's just the nature of some types of people to bitch at whatever the cost. I've got some stories on this subject... I should post one of them... AH, customers... gotta love em' Whether they are right or wrong... in their eyes your still wrong... another day in paradise.

Edited by Gonzo
Link to comment
Share on other sites

Gonzo, I had that argument at a shop owner's meeting a while back: Why do we have to be lower than the dealer? If they lower their prices, we have to lower our prices too? Is there some unwritten law?

 

Joe, this is one subject that I can't understand how it's even an issue. You know, sometimes, I "feel" like I'm higher than the dealer, but, I'm a specialty shop dealing mainly in odd ball electrical problems that no one else (even the dealer) doesn't want to touch. So how the hell is my price proactive with another shop... go figure.

 

My biggest argument is: If you go to hospital "A" and have a surgery... it's going to be one price.... go to hospital "B" and it's entirely different. Same with a dentist, a plumber, the way a bank charges for their services.... hell, even a resturaunt doesn't charge the same for the same meal. So why is it expected that we... the people that keep you moving on this countries roads and byways be "cheaper" just because "YOU" say so.

 

That's my story... and I'm stickin to it... LOL

Link to comment
Share on other sites

Joe, this is one subject that I can't understand how it's even an issue. You know, sometimes, I "feel" like I'm higher than the dealer, but, I'm a specialty shop dealing mainly in odd ball electrical problems that no one else (even the dealer) doesn't want to touch. So how the hell is my price proactive with another shop... go figure.

 

My biggest argument is: If you go to hospital "A" and have a surgery... it's going to be one price.... go to hospital "B" and it's entirely different. Same with a dentist, a plumber, the way a bank charges for their services.... hell, even a resturaunt doesn't charge the same for the same meal. So why is it expected that we... the people that keep you moving on this countries roads and byways be "cheaper" just because "YOU" say so.

 

That's my story... and I'm stickin to it... LOL

Link to comment
Share on other sites

 

That MOTOR Magazine article says it all. I laugh at the old saying: "I'm telling all my friends that you're a rip off... etc.. etc.." My answer... friends like that... keep em' and I'm happy they are not going to be coming to my shop. On the other hand... I'll bet your friends know exactly what your like... so it's no surprise to them that "you act like a jackass".... I'm grateful to them all.... glad your gone ... FOOL! !

Link to comment
Share on other sites

That MOTOR Magazine article says it all. I laugh at the old saying: "I'm telling all my friends that you're a rip off... etc.. etc.." My answer... friends like that... keep em' and I'm happy they are not going to be coming to my shop. On the other hand... I'll bet your friends know exactly what your like... so it's no surprise to them that "you act like a jackass".... I'm grateful to them all.... glad your gone ... FOOL! !

 

 

I tell them--[ opinions is like asshole's every one has one ! ] You are right most pepole are intelligent that they no thier is two sides to the story. I have had clients say I am going to tell so & so and so on . I have called some of the friends and they tell me we know how they are we still will be your clients.

Doesn't happen often , but when it does it is upsetting.

Link to comment
Share on other sites

I tell them--[ opinions is like asshole's every one has one ! ] You are right most pepole are intelligent that they no thier is two sides to the story. I have had clients say I am going to tell so & so and so on . I have called some of the friends and they tell me we know how they are we still will be your clients.

Doesn't happen often , but when it does it is upsetting.

 

 

So true Dan, I have to admit it doesn't happen often but when it does... it really gets to a guy. Over the years you get to the point you can almost tell when it's going to happen by the customers reactions... read my book... you'll see what I mean. Gonzo

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By carmcapriotto
      Thanks to our Partners, NAPA TRACS, AutoFix Auto Shop Coaching, and Today's Class Discover the significance of mentorship with Bill Weaver, a NAPA Autotech Trainer, and his mentor, Jim Dzurik. They share personal stories and insights into their mentor-mentee relationship, highlighting how mentorship has profoundly impacted their lives and careers. The conversation delves into the importance of passing on knowledge and wisdom to the next generation. The episode emphasizes the value of seeking and offering mentorship to foster growth and personal development. Bill Weaver, NAPA Autotech Trainer. Listen to Bill’s previous episodes HERE Show Notes
      The idea of a mentor-mentee episode (00:01:02) Bill Weaver proposes the idea of a mentor-mentee episode, leading to the discussion of mentorship and the impact of having a mentor in one's life and career. Mentoring Bill Weaver (00:02:05) Bill and Jim discuss their mentor-mentee relationship, including Jim's initial impressions of Bill and the challenges and growth they experienced together. Teaching and learning (00:04:45) How Jim taught Bill about responsibility, punctuality, and the importance of learning and listening, leading to Bill's personal growth. Bill's entry into the transmission shop (00:05:58) Bill's entry into Jim's transmission shop and the initial impressions and experiences of working together. Challenges and growth in the mentorship (00:07:17) Jim's candid admission of being frustrated at times and the challenges they faced, including humorous anecdotes about being fired multiple times. Teaching the "why" and "how" (00:10:24) The importance of mentors teaching the "why" and "how" to their mentees, and Jim's realization of his role as a mentor. Passing on knowledge (00:12:07) Bill's realization of the importance of passing on knowledge and being a mentor to the next generation, inspired by his own mentors. Memorable moments and popular culture (00:14:11) Fond memories and experiences shared between Bill and Jim.. Star Wars memory (00:17:20) Discussion about watching Star Wars and the impact it had. Mentorship and life skills (00:20:26) Discussion about the mentorship relationship, life skills, and wisdom. Importance of research and failure (00:24:06) The significance of research, failure, and learning from mistakes in mentorship. NASCAR and boxing stories (00:28:47) Stories about NASCAR involvement and interactions with famous boxers. Retirement and family influence (00:31:29) Conversation about retirement, longevity, and family influence. Legacy of mentorship (00:32:56) Reflection on the impact of mentorship and teaching. Finding one's calling (00:38:00) Discussion on how individuals may discover their true calling and the importance of pursuing it. Becoming a mentor (00:40:11) Encouragement for individuals to volunteer as mentors and the impact of expressing gratitude to mentors. Persisting and seeking knowledge (00:44:25) The importance of persistence, continuous learning, and adapting to changes in the automotive industry. Thanks to our Partner, NAPA TRACS NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Thanks to our Partner, Auto-Fix Auto Shop Coaching Proven Auto Shop Coaching with Results. Over 61 Million in ROI with an Average ROI of 9x. Find Coach Chris Cotton at AutoFix Auto Shop Coaching on the Web at https://autoshopcoaching.com/ Thanks to our Partner, Today's Class Optimize training with Today's Class: In just 5 minutes daily, boost knowledge retention and improve team performance. Find Today's Class on the web at https://www.todaysclass.com/ Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on X (Twitter): https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections                                  
      Click to go to the Podcast on Remarkable Results Radio
    • By Silver Star
      Does anyone know a standard thickness for an alloy wheel edge where the bead seats? I have a debate going on over a wheel being to thin to use. A comparable wheel measures at 8mm thick, this one measures at 5.6mm thick. Anybody able to weigh in? I have seen other alloy wheels at 5mm thick.
    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • Water Proof And Self Adhesive
    • By carmcapriotto
      The Weekly Blitz is brought to you by our friends over at Shop Marketing Pros. If you want to take your shop to the next level, you need great marketing. Shop Marketing Pros does top-tier marketing for top-tier shops.
      Click here to learn more about Top Tier Marketing by Shop Marketing Pros and schedule a demo:https://shopmarketingpros.com/chris/
      Check out their podcast here: https://autorepairmarketing.captivate.fm/
      If you would like to join their private Facebook group go here: https://www.facebook.com/groups/autorepairmarketingmastermind
      In this podcast episode, Chris Cotton from Auto Fix Auto Shop Coaching addresses the negative impact of phone trees on customer service in auto repair shops. He emphasizes the importance of the human touch and shares his frustration with complex phone systems that deter customers. Chris offers practical advice for revamping phone systems, such as auditing current setups, matching staffing to call volume, and soliciting customer feedback. He advocates for a balance between technology and personal interaction, stressing that each call is an opportunity to showcase excellent service and stand out from competitors. Chris concludes by inviting listeners to contribute to the conversation on maintaining a personal touch in customer service.
       
      The importance of human touch in customer service (00:01:05) Chris discusses the negative impact of phone trees on customer service and the need for a human touch. The drawbacks of using phone trees (00:02:07) Chris explains how phone trees can frustrate customers and lead to missed opportunities. The value of personal interaction in customer service (00:05:21) Chris emphasizes the importance of human connection and empathy in the customer service experience. Balancing automation and human interaction (00:07:31) Chris discusses the need to strike a balance between technology and human interaction in the auto repair business. Practical tips for revamping phone systems (00:09:33) Chris provides practical suggestions for improving phone systems to better serve customers and enhance the overall customer service experience.  
       
       
      Connect with Chris:
      [email protected]
      Phone: 940.400.1008
      www.autoshopcoaching.com
      Facebook: https://www.facebook.com/
      AutoFixAutoShopCoachingYoutube: https://bit.ly/3ClX0ae
       
      #autofixautoshopcoaching #autofixbeautofixing #autoshopprofits #autoshopprofit #autoshopprofitsfirst #autoshopleadership #autoshopmanagement #autorepairshopcoaching #autorepairshopconsulting #autorepairshoptraining #autorepairshop #autorepair #serviceadvisor #serviceadvisorefficiency #autorepairshopmarketing #theweeklyblitz #autofix #shopmarketingpros #autofixautoshopcoachingbook
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors



×
×
  • Create New...