Quantcast
Jump to content

Why I have come to love the Prius

flacvabeach
 Share

Recommended Posts

flacvabeach Community Regular

flacvabeach

Posted
Posted

I'm a classic British car fanatic who drives a 1969 Morris Minor 6cwt utility van on a daily basis. It took me a while to warm up to the new-fangled idea of hybrid cars, but now that I have some training and service experience under my belt, I have developed an admiration for the technology, especially as applied in the Toyota Prius. As most of you know there are a myriad of applications of so-called hybrid technology, some as simple as using the generator as a motor to supply a little more zip and perform auto-stop. Toyota, in my opinion, got it right in the Prius. It's an amazing integration of gas and electric power to make it go and make it stop, all of it so transparent to the driver that they decided to show a little movie of what's powering what as you drive down the road. Fascinating stuff. But the crowning glory to me is the transmission. it's usually advertised as a CVT and, if you're like most techs, you cringe a little when you hear that. Special fluids, start clutches, metal belts, shuddering as you accelerate and the near certainty of limited life make you think seriously about the value of this supposed innovation. But the Prius CVT is a completely different animal that uses a principle that can be a little hard to grasp. It's a planetary gear that is in constant mesh with no slip/friction components involved. What prompted me to post this is a neat website I found that describes the operation of the tranny in detail. It's at http://eahart.com/prius/psd/ and it even has a little widget that let's you "shift the gears" and see the results. It's no wonder that, since they improved the traction battery starting with the Gen2 in 2004, these little guys are just about bulletproof and it's not unusual to find them humming happily along at 250,000 plus.

  • 2 months later...
Junior Collaborator

Junior

Posted
Posted

That is a pretty interesting page, I'm going to do a little more reading there when I get time. We do a lot of service on hybrids especially Prius, including rebuilding Gen1 batteries with gen2 cells and civic/insight IMA pack rebuilds. It's pretty good business and there is no one else in the area doing it. I've only seen one trans failure on a Prius and that was due to the HV motor overheating so they are quite bulletproof.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Available Subscriptions

    See all Subscription Plans

  • Have you checked out Joe's Latest Blog?

    • Joe Marconi
      The Technician Shortage Is Our Fault, And It's Time We Own It
      By Joe Marconi in Joe's Blog
         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.

  • Similar Topics



  • Similar Tagged Content

  •
    Joe Marconi

    Marketing Strategies To Attract and Retain Your Ideal Customers

    By Joe Marconi, in Automotive Marketing,

    1 comment 7,924 views
    nptrb

    Mid-Year Reset: What Your Auto Shop’s Numbers Are Telling You

    By nptrb, in Automotive Management,

    0 comments 9 views
    Joe Marconi

    Every shop owner tracks gross sales. But is that really the number you should be focused on?

    By Joe Marconi, in Joe Marconi's Tips and Articles,

    0 comments 1 36 views

  • Our Sponsors

Main Sections

More Sections

Discussion Forums

×
×
  • Create New...