Quantcast
Jump to content
    • You can post now and register later. Already registered? sign in now to post with your account.
    • ×   Pasted as rich text.   Paste as plain text instead

        Only 75 emoji are allowed.

      ×   Your link has been automatically embedded.   Display as a link instead

      ×   Your previous content has been restored.   Clear editor

      ×   You cannot paste images directly. Upload or insert images from URL.


      Once you submit your question, a new topic will be created for you in our forums. Our moderators may move your topic to a more suitable forum category if one exists. Members will see your topic and be able to respond to your question.

    • This will not be shown to other users.
Gonzo

Article: Go The Distance - Finish what ya started

Recommended Posts

Go the Distance

It’s no wonder the average consumer fears going to the repair shop for anything. With the way some people diagnose problems on cars I don’t blame them. I run across more botched attempts than I care to remember. Hey, I’m not perfect by any means, and I certainly didn’t know what I know today back when I started. We all learn from our mistakes, but letting a mistake walk out the door of the shop isn’t smart. It’s one thing for a shop to tell a customer that a part has failed, but it’s an entirely different thing to replace the part, then throw their hands up and say, “You’ll have to take it to somebody else, because I don’t know what’s wrong with it.” Even though prior to installing the part they probably told the customer that it would fix their problem. And of course, somehow, some way the customer will have to cough up the cash to get their car out of that particular shop.

Is making the fast buck with the quick diagnosis their preferred method of operation? It must be. How about thoroughly testing the problem beforehand? Instead, when their guestimation doesn’t work they bail out of the repair. No wonder the automotive repair business has such a bad reputation. But, I can’t blame just the shops that do shoddy work for all of this; ya have to blame the customer as well.

Just because there’s a sign that says, “Mechanic on Duty”, or the marquee says “Thrifty Repair and Lube”, doesn’t tell me a whole lot about who’s going to be tinkering around with the second-most expensive thing in most peoples’ lives. Besides, Mr. and Mrs. Consumer, cheap oil changes are not the same thing as engine diagnostics, and there is a difference in skills of mechanics too. Oh, wait a second, I forgot about that one factor that dictates the answer to most everything, cost. Bargains are bargains, but risking your car for a bargain priced repair may be dangerous or even more costly in the long run.

The penny-pinching customer’s thought process, (as I’ve heard from different sources), goes something like this: “If I use the cheap shop and they get it wrong, I’m not out a whole lot. If I go to a reputable shop and they get it wrong, I would have to spend a whole lot more, and still be looking for someone else to fix the problem.”

In all fairness to reputable shops, the qualifications and skills of those individuals aren’t based on guess work or throwing a dart at a wall. Even if a shop looked at the problem and determined it wasn’t something they felt comfortable with, they would know the most reputable shops that could handle it. Believe me, all the shops in a given area know exactly the quality, or types of work, the other shops do in their area. They also know which shops to stay away from.

Training has a lot to do with what separates the mechanics who actually fix cars, and the ones who just throw their hands up? This training is an ongoing-never-ending process for the modern mechanic. The other part, and probably the most important part, is that they’ll stick it out, and find the problem; they’ll go the distance. When a technician is diagnosing a strange or rare problem, and gives up in the middle of it, he/she isn’t helping the customer, or the shop. A good diagnostic technician will go the extra mile and find out what’s wrong, rather than assume he can’t figure it out.

A perfect example of this is a car that came in from another shop just the other day. The story goes the car wouldn’t start, as the battery was dead. After installing a battery it started, but the mechanic found the wiper motor running constantly. So, he ordered a replacement motor. He installed it, but instead of the wipers working, it blew the wiper fuse. In the meantime, the supposedly new battery ran down to the point where the car wouldn’t start. He then recharged the battery and the car started, but still no wipers. Several trips to the printer to pull off copies of every wiring schematic he could find still added up to a complete zero for him. Now the car wouldn’t start again, and the wipers still weren’t working. He threw his hands up and said, “Ship it to another shop, it’s beyond me.”

Now I’m involved in this whole thing. The other mechanic even left all the schematics in the car for me. Well, the starting problem was no big deal. A little investigative work answered that little mystery. The battery was no good as I later found out; it was the shop test battery. Somebody put it back on the sales shelf by mistake. The wipers on the other hand… now that was a little different. If the other mechanic would have read the wiring diagrams, he would have found the problem. It was the wrong wiper motor for the car.

Even though he ordered the motor correctly, the motor was actually boxed wrong. This guy didn’t bother to check any further. Just because you installed a part and it still doesn’t work, doesn’t always mean the problem is elsewhere. It just goes to show that a diligent effort is needed in order to come to the right conclusion on any repair.

That’s the point. “Go the Distance” isn’t just a saying, it’s something that all mechanics/technicians should take into account when they are looking under a hood. Stopping short of a completed repair doesn’t make for a great relationship with your customer, nor your boss. Don’t expect the next guy to pick up the pieces, or for that matter if the parts guy got it right. You’re the guy on the firing line, no one else. If this is your career choice then make it a career, not a job. That means learn your trade, don’t parts change, and don’t rely on somebody else for the answers. Just because you can unbolt a part, and stick another one on, doesn’t make you much of a mechanic. Diagnosing, reading the repair information, and studying the wire schematics are all part of taking care of the customer’s needs. Sure you’ll make mistakes, but everyone does. The more time you spend today studying and learning the diagnostic information in front of you, the more likely tomorrow you won’t have to. If you want to be one of tomorrow’s top techs in demand, then start today and … Go the distance.

 

 

Click here to view the article

Share this post


Link to post
Share on other sites

We allow visitors to read the first post of each topic. To read this post, please login or register for a membership. 

  • Like 1

Share this post


Link to post
Share on other sites

  • Similar Topics

    • By tylerl
      Hey guys looking for a little advise for people that have been in my situation. We are a smaller shop but really starting to transition to doing more volume in the past 2 years. Been in business for 10 years now and currently have 2 full time tech's and myself. I manage most of the office and service writing stuff and even occasionally help wrench in the back when required. Looking to hire a service advisor soon to help with the work load on the counter.
       
      Currently we just use a a mix of excel spreadsheets for invoicing and customer history, as well as Google calendar. My questions is will I see a big benefit from moving to a all in one management program? Is it worth the monthly fee's for a smaller outfit like mine? 
       
      Should mention we are in the powersports arena (mostly boat repair with some other rec equipment) so some of the platforms out there are not 100% tailored to our industry with the ones that are not offering up everything you would get out of a automotive program. Thanks in advance for the help!
    • By AutoShopOwner
      Massachusetts voters are deciding in this year’s election on whether they---and not the vehicle manufacturers---have control over the repair data generated by the vehicle they purchased.
      The Auto Care Association and the Coalition for Auto Repair Equality (CARE) have supported efforts by the Massachusetts Right to Repair Committee to obtain public support for ballot Question 1, which would give the consumer choice in vehicle repair. 

      “While the battle has been hard fought and expensive, the Auto Care Association is pleased that the most influential publications in the state have seen through the negative advertising campaign being funded by the vehicle manufacturers and have unanimously urged their readers to vote ‘yes’ on Question 1,” said Bill Hanvey, president and CEO, Auto Care Association. “We trust that voters in the state will agree with these publication that the right to repair is important and that advances in vehicle technology should not be used to limit the ability for owners to have their vehicle repaired by the shop of their choice."

      These “‘Yes’ on Question 1” endorsements include: 

      The Boston Globe on Oct. 13 declared, “The reason the new Right to Repair measure should pass is simple: It is inherently unfair for car manufacturers to have sole access to a vehicle’s mechanical data, because it gives their dealerships an advantage over independent auto-repair shops. That ultimately hurts consumers, because with limited options come higher prices.”

      The Boston Business Journal on Oct. 15 maintained, “Without the ability to repair cars equipped with wireless electronics, repair shops will see declines in business in coming years as car owners are forced to get repairs done at more expensive dealerships. In the end, more of the millions of dollars that Bay State residents spend every year to fix their cars would go to out-of-state manufacturers. More neighborhood car-repair shops will go out of business."

      The Sun Chronicle on Oct. 21 stated, “…we think the opponents of the law have done themselves no favors by overhyping the risks it poses. For example, the ‘No’ campaigners lean heavily on a statement from ‘Jane Doe Inc.,’ a Massachusetts advocacy group against domestic violence and abuse. But, on its website, that group now says its position on the referendum has ‘evolved’ and, while saying it’s staying neutral, complains that it’s wrong to use the fears of abuse survivors to promote a political position. For that alone, we think the opponents of Question 1 deserve to get their comeuppance at the ballot box.”
      The Berkshire Eagle on Oct. 21 stated, “Question 1’s opponents had ample opportunity to explain why this lobby should keep a monopolistic grip on your car’s telematics. They instead spent their campaign dishonestly fear-mongering in an attempt to distract consumers from asking why carmakers should be able to flout the spirit of the extant Right to Repair law to drive more repair jobs to their dealership garages. Hopefully voters will see through this charade.”
       
      For more information about the Right to Repair ballot initiative in Massachusetts, visit massrighttorepair.org.
      Source: https://www.autobodynews.com/index.php/northeastern/item/21245-right-to-repair-ballot-initiative-endorsed-by-major-massachusetts-news-publications.html?start=1
    • By Elite Worldwide Inc.
      Keep Your Shop's Summer Momentum Going! 
      Elite's Supercharge Your Shop, a series of 4 live online courses for shop owners, starts Sept 14th! 
      Learn to master your shop's numbers, recruit the top techs & advisors, maximize employee productivity, fill up your bays with your ideal customers and more!
      These live online courses will be taught by industry superstars Joe Marconi and Kevin Vaught, who have both experienced extraordinary success as shop owners, so everything you'll learn has been proven to generate extraordinary real world results!
       You have the option to either enroll in the whole Supercharge Your Shop course series, or pick and choose the individual courses that will help your shop the most. Here's the course schedule:
      Sept 14-15 - Mastering Your Shop's Numbers and Cost Control
      Sept 16-17 - Hiring America's Top Techs & Advisors
      Sept 21-22 - Maximizing Employee Morale, Productivity and Profits
      Sept 23-24 - Filling Up Your Service Bays with the Ideal Customers
      To enroll in the complete series of these 4 live online courses, just visit our Supercharge Your Shop Page to reserve one of our last openings!
       
       
    • By Joe Marconi
      We, automotive shop owners of America,  must take the opportunity of a lifetime and turn it into a bunch of success stories. What opportunity?  Look around you. The world is in turmoil. COVID-19, social unrest, uncertainty about the presidential election, the economy, how are we going to get out kids back to school, on and on and on.
      While the world is spiraling out of control, we have the power to make big changes to our auto repair shops.  And it can all be positive! 
      The Opportunity...
      First, the average age of a car in the U.S. is about 12 years old, attaining well over 200k on the clock. 
      Second, Uber, taxis and limo companies are suffering.  Guess why?  
      Third, the motoring public in the foreseeable future will be traveling by car, taking road trips like they have never did before.
      Fourth, the roads are packed with motor vehicles, as more and more people prefer their own car as their primary means of transportation. 
      Fifth, as the cars get older and older, more of them will be out of factory warranty.
      Sixth, independent auto repair shops have a vast amount of training, resources and replacement parts.
      Seventh,  the overwhelming majority of cars being build and sold today are still internal combustion engine powered cars. If you factor in the expected average age of car these days, we can safely bet that those gas engine cars being sold today will still be on the road in 2033 and beyond! 
      Eight, You need more?  That's not enough! 
      Get your plan in place.  Get your prices in line with making a profit. Don't give anything away anymore (I am mostly referring to checking, testing, diags of any sort!) Offer world class customer service. Be a leader of your employees.  Show the world what you are made of! 
    • By Joe Marconi
      Most of you probably already know what I am about to say:  The Service Advisor position is the most crucial position in the shop.  I know, I know, what about the mechanical work done by the techs?  Well, that's important too, of course. 
      For the most part, customers spend their hard-earned money and most of time don't really know or see what was done to their car.  Let's face it, the customer can't see the water pump or T-belt. And most of the time, the customer does not feel any difference with the car as they drive out of your parking lot. 
      What the customer does see (or experience) is how she was treated.  And that makes all the difference in the world.
      Plus, great service advisors also motivate the technicians, because great advisors are also great leaders of people. 
      Think about this...Six months from now, your customer will not remember the fuel injection relay or the mass air sensor that was replaced....but she WILL remember how she was treated. 
      And trust me, that OE-quality fuel injection relay install by a certified A-level Master tech using Snap On tools and a Launch Scanner IS NOT the reason WHY your customers return to you....She returns because of the level of service your provide.
       


  • AutoShopOwner Sponsors



×
×
  • Create New...