Quantcast
Jump to content


Joe Marconi

Toys for Tots-Promote Goodwill

Recommended Posts

I got involved with the Toys for Tots program a few years ago. It's a program that collects new unwrapped toys for needy kids. It is sponsored by the US Marine Corp. I have to tell you, it's a very rewarding thing to do.

 

We have a big box in our waiting room with the Toys for Tots logo on it and customers see it and come back with a small toy. It is amazing how giving people are.

 

We promote it thru all our advertising media the month of December and thru email blasts and social media.

 

I like doing things like this around the holidays. I don't know how others feel, but during the holidays I shift my mind away from business and focus more on people and spreading Goodwill.

 

Here's a link:

 

http://www.toysfortots.org/

Toys for Tots.jpg

Share this post


Link to post
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Forum Topics

    • Article: It's Doing The Same Thing --- Is it really????

      It’s Doing the Same Thing             Being on the mechanic's side of the counter, I've  often wondered what does "the same thing" really mean?        Nearly every time a customer comes up to the service  counter, who has no background in automotive repair, or  any idea at all on how repairs are made and what's all  involved, but tells me, “It’s doing the same thing”,  I have  to ask myself… “How do they know?”  Is it really doing exactly  the same thing?  Funny, how it turns out (99.9% of the time),  that it’s NOT doing the same thing.            I hear this rhetoric from customers now and then, but when my wife starts in on me with the good ol' 'It's doing the same thing', now I'm more than a little curious.  Here's an example.        We were about to head on our vacation when the bulb warning light on the dash came on indicating one of the rear lights was out.  It was a side marker light on the driver’s side of the car. Easily changed and taken care of, and with all the commotion and last minute preparations, the warning light problem became a distant memory. So off we went on our little adventure.       Several states and hundreds of miles later while the wife was driving, and I was taking a nap, she nudges me and says, “It’s doing the same thing”.           Now I understand there is always the possibility that it really is doing the same thing, but really my dear … you’re married to a mechanic. Can we at least re-think how to inform me of such things?  Yes, the light on the dash is “doing the same thing”, but let’s try rephrasing it to the guy just waking up from a pleasant-no-stress-day-off.  How about: “The warning light is back on, dear.”  At least that way I won’t feel like I’m back at the shop trying to decipher the latest “doing the same thing” dilemma. I’m on vacation for heaven’s sake!            At the next stop I performed the usual "walk around" and noticed the passenger side marker light that was out this time.   Not to be outwitted by a little warning light, I gave the lens a little tap. Low and behold, the filament lit up, and off we went.           As we traveled down the road I had plenty of time to ponder how many times I’ve heard the phrase, “Doing the same thing”.  Over the years I’ve seen this escalate into complete madness at the front counter or end up with a tap on a bulb lens.  As in my wife’s case, the dash warning light could only indicate that a bulb was out and which end of the car it was.  However, when a customer lays down a chunk of their hard earned cash their interpretation doesn’t include the possibility of multiple issues controlled by the same warning light. From their perspective, it's doing the same thing.                  A few weeks ago I had a 1995 Saturn in the shop that had been all over town, as well as to every relative who owned a tool box.  No one seemed able to get the air conditioning to cool.  Part after part was changed, but still no cold air.  When I finally had a crack at it I was surprised at what I found.  The connector for the A/C compressor was exactly the same style and type as the low coolant level sensor mounted in the over-flow bottle.  Somebody had flip-flopped the connectors.  Once I found the problem the cure was simple… just reverse the connectors and “Ta-Da” cold air.  All the functions were working, cooling fan, line pressure, vent temperature, everything was great.  Even the “low coolant” light was operating correctly.                  But where would this story be without a 'It's doing the same thing' scenario.           A few weeks later I get a call, you guessed it… “Doing the same thing”.  Now, I’m no dummy, I know what they meant.  They're actually telling me that it's not making cold air again.  I informed them it was probably leaking refrigerant or something like that, but I seriously doubt somebody switched the connectors again.  They weren’t buying that, they kept insisting that it’s doing exactly the same thing as before. Even after reading the description of the repair on the invoice, and telling me they totally understood it… they still can't break away from the common reply... it's “Doing the same thing”.               This follows right along with the typical scenario right after changing out a blower motor for a customer and a week later they're back because their air conditioning isn’t cold. I’ll ask, “When did you notice the air wasn’t cold?”   The usual answer, “Right after you changed the blower motor.”           I should have a guy in the background with a drum set patiently waiting for me to ask, "So when did you notice the problem?" and when the customer delivers the inevitable punch line, the drummer could bang out the classic drum roll-rim tap and cymbal crash.  A priceless moment for every counter person.                  The way I see it, the consumer brought their car into a repair shop for a professional evaluation of a problem, and expect to never see a related or similar problem ever again.  But, as soon as the work is done and some other problem creeps up that seems to be more than a little bit like what they just had repaired, the mechanic is soon to have the same thing happen again.                  The fact that there are other things that can go wrong can be a huge mountain to climb. But, with some diplomacy, and tact, a good counterman can get through these situations.  One thing for sure, as the mechanic, you've got to get in there and solve the problem no matter if it's the same thing or not.  Generally, (from my past experiences) the same thing is hardly ever the 'same thing'.  The Saturn, was a faulty compressor due to the fact the last shop didn't add enough oil to the compressor, the replaced blower motor problem, was a faulty low pressure switch, and the wife's car, well... she hasn't had to tap on the bulb lens ever since.                     But to me.... it's all the same thing.  
      View full article

      By Gonzo, in AutoShopOwner Articles

      • 3 replies
      • 190 views
    • Article: Picture This - - Hard to believe I wrote this 20 years ago.

      Picture This   Years ago my younger brother came to work for me. He didn’t know a thing about cars, but was willing to learn all he could. Teaching new techs is an art that most shop owners have to learn to do, but teaching your little brother can be a chore and can test your patience. I muddled thru it all and taught him what I could. I was sure at some point in time the two of us would butt heads like brothers will do, and he would take his new found skills and move up in the rank and files of the automotive technical world, but in the meantime it was his turn to learn from his older brother.   When he first started I would walk him through each step of how to diagnose a certain system in a car. A lot of times he would have questions, and I’d do my best to answer them. He learned quickly and was really sharp at picking up some of those little details that are harder to teach. You know things like how you held a certain wrench or used a certain tool, to you and me it’s no big deal. But to a novice, it’s a revelation, then you (I) tend to forget to mention those certain traits while you’re teaching. Mainly because you are trying to get to the solution as efficiently as possible, and you neglect to bring it up. Such as: “always test your test light connection before testing what you’re testing, or don’t forget to check for all your tools before you pull the car out of the shop….” Things like that.   One day we had a truck come in with dual fuel tanks on it. The gas gauge wasn’t working and needed some attention. This was a perfect opportunity for Junior to learn a few of my short cuts on these old models. It was an older Ford, in which the tank gauge ran thru the tank switchover button. It was rather easy to pull it out of the dash and connect to the gauge from the back of the switch. Luckily it was the typical problem I’ve seen a hundred times in the past. The switch connections would melt and the tank wouldn’t switch from the front tank to the rear, and of course the gauge wouldn’t move either.   After locating the correct leads to the gauge and to the tanks I decided to show him how the gauge worked. I hooked up the one of the tanks to the crossover lead that would supply the signal from the tank to the gauge.   “Ya see this, that’s the lead to the fuel gauge in the dash, and this is one of the tank wires. I’ll connect these together and we should get a reading on the dash,” I told him. He was watching intently, taking in all the wiring diagram information, the location of the wires, and how I was bypassing the switch. He was fascinated with the flow of the current and the way the gauge would respond. I even went as far as moving the gauge from full to empty by opening and closing it to a ground signal. While I had his attention I filled him in on the two types of gauges that were used back then (bimetallic and magnetic) and how low resistance on a bimetal type gauge would read near a full tank, while a magnetic gauge would read close to empty. Change the resistance and the gauge would/should read accordingly.   “So, if we put gas in the tank the gauge should move right? That way we could check the sending units in the tanks too,” he asked me.   “Great idea, grab a gas can and let’s add a few gallons,” I said, excited that he was so interested in the project.   He grabbed a can of gas and poured a few gallons in the tank. I was watching the gas guage carefully, but there was no movement. I knew I was on the right wires, but nothing was happening. Now what? Are there more problems?   “Crawl under there, and check to be sure the wire color is correct,” I yelled from the cab to him.   “Yep, it’s the right wire on the tank.”   “Well, we might have to pull the tank; it’s not changing the gauge readings up here.”   “Before we do that let’s add some more gas, maybe we didn’t add enough,” Junior tells me.   I thought I better go back and help hold the funnel, while he poured the gas in the tank. Unknowing to me, all this time my wife (who was the office manager) was listening in on the whole thing. She likes to keep tabs on me, and make sure I’m not going into one of my usual rants or having a fit because I had to explain something over and over again to little brother. This time she was standing at the corner of the shop just behind the truck with a camera. “CLICK”, I heard the camera shutter go off and she was back there laughing like there was no tomorrow.   “What’s so funny?” I asked her.   “You two idiots have been putting gas in the wrong tank. You’re on the front tank, and you’re putting gas in the rear tank,” my wife answers, laughing hysterically. About then the camera “clicked” again… this time it was an action shot taken at precisely the exact moment when these two idiots had that dumb struck look on their faces and realized what they just did. The shot had both of us on our knees, one holding a funnel and the other with the half empty gas can, and both of us staring right into the camera lens. Couldn’t have set it up any better if you tried. The picture clearly showed the side of the truck with both fuel tank doors visible and there was no doubt which tank we were putting in the extra gas. I guess it was one of those things I should have mentioned when we were checking the tank senders… make sure we are both on the same tank. For years that picture hung over her desk, and anytime I thought I was so smart she would point at the photo. Usually with that typical smirk, usually shaking her finger at me and of course the laugh… she had to laugh, but it wasn’t all that funny until she had me laughing about it too. Ok, Ok, I’m not perfect... and now my little brother knows it too.   These days he’s a top notch tech at a dealership, and I have to call him on occasions for some help on how to solve things once in a while. Oh the photo… uhmmm… what photo?? Somehow it’s missing… haven’t seen the darn thing in years. But I guess I really don’t need to see the photo … the wife has a pretty good memory... she reminds me just how smart I think I am every chance she gets.           Click here to view the article

      By Gonzo, in AutoShopOwner Articles

      • 5 replies
      • 676 views
    • Profitability "sweet spot", is there such a thing?

      Looking forward and thinking about business goals for the future, I'm wondering if there is such a thing as a sales volume, personnel, or facility sweet spot for profitability. I'm in a semi-retirement mode already, so having profits to spend is a priority over simply growing the business for growths sake. I really enjoy being in business and planning and reaching for goals, but wondering about what those goals for the business should be. I've reviewed some industry financial data without any clear conclusions, but I'm wondering what folks here think or have seen or experienced. A little about where I'm at currently. I started this business from scratch 7 years ago. We currently have 8 employees and did 1.3 in 2017. Any wisdom from you who have been doing this longer?  

      By gandgautorepair, in General Automotive Discussion

      • 21 replies
      • 1,359 views
    • The One Thing You Must Retrieve From Customers

      I want to talk about collecting the right information from every one of your customers while they’re in your shop. What do I mean by that? When we’re talking about marketing, it’s important that we collect all the current information that we have on our customers so that we can continue to market to them. Marketing to your current customers, it’s like picking the low-hanging fruit. It’s the easiest group of people to get back into your shop, so we want to make sure that we collect all the data that we can from our customers while they’re sitting right there in our shop. Obviously, what you want to do it get their correct name. Make sure their name is spelled correctly. Have that in you database. Then, also, we want their mailing address. Everybody’s got a place they’re living. They’re not living in their car, chances are. So we want to make sure that we get their home address so that we can mail something to them. The next thing on the list is we want to make sure we get their e-mail address. We want to make sure that we’re getting the right e-mail address. Not the e-mail address the junk e-mail that a lot of people, including me, I have a junk e-mail address that I give to everybody because I don’t want them to contact me. We want to make sure that we get their actual e-mail address. The one that they actually do check. It’s very important you do that. You May Also Like:  Putting An Auto Repair Ad In The Yellow Pages Then, the next thing that I want to make sure that you get is the two phone numbers that they have. One is their home phone number. Some people don’t have home phones anymore. I happen to still have a home phone number. If they don’t have their home phone number, certainly, they have a cell phone. You want to make sure that you’re collecting that data as well. What you’re going to be able to do with all this, if you have a home address, you can send them a piece of mail. If you have an e-mail address, the good e-mail address, you can send them an e-mail. If you have their home phone number, not only can you pick up the phone to call them, I call it dialing for dollars when you’re on your slow days to see if you can get some of them to your shop, but you can also do something. It’s a technology called the voice broadcast where you record a message, and it blasts it out to everybody’s home phone number and leaves a message just like you would’ve left a message on their voicemail by calling their home if you called them one by one. This is different, where you just record it one time and it blasts it out to everybody. Then, if you get their cell phone number, you can send them a text message, and 99% of text messages get read, and 95% of them get read within the first five minutes. So it’s a very valuable way to be able to market to them. You May Also Like:  What's New In The Automotive Repair Industry? But none of this is going to work for you if you don’t have the accurate data in your database. So here’s a suggestion that you start right now, today, with the very next customer that walks through the door and you start collecting that data. Think of it like when you went to the doctor’s office the last time. What they did is they handed you that clipboard and said, “We’re updating our records. Please fill all this out.” You can protest all you want, but they’re going to make you fill those forms out every single time you go in. Why? They have insurance forms that they need to fill out, and they got to make sure everything’s accurate. You, you need to market to them. You got to run your business off of this data. So require that they fill out each and every one of those lines. Their name, their e-mail address, their phone number, their cell phone number. You want to make sure that you collect all that data so that you can market to them. Just assume that they’re going to give you that data and no questions asked. If you just ask for an e-mail address, now there’s a dialogue that kind of goes back and forth. If you simply hand them a form that says “We need all this information for our database, for our records,” they will go ahead and fill that out. Make sure that you get that done. You also, at the bottom of that form, you want to have like a little disclaimer that by singing below, and you want to make sure they sign it, by signing below, you are allowing Ron’s Auto Repair to contact them by mail, by phone, or any other electronic means necessary. You want to have that little catch-all, cover-your-butt legalese on there so that when they sign it, they literally have given you permission to market to them using all of those means.It all starts with good information if you want to be able to market to your current customers. Your current customers are your best source of income, and we’ll cover that on other videos like this. You got to make sure that you have the data first so that you can market to them in the future.   note: Be sure to watch the replay of my Live Webinar

      By Ron Ipach, in Marketing, Advertising, & Promoting

        
      • 2 replies
      • 580 views
    • Bonus Program

      We are trying to come up with a bonus program to include our estimators, office staff and parts employees. I think it would have to be structured differently for each but I am not sure what to base the bonuses on. Any ideas?

      By Reggie, in General Automotive Discussion

        
      • 2 replies
      • 503 views
  • AutoShopOwner Sponsors



×