Quantcast
Jump to content


    • You can post now and register later. Already registered? sign in now to post with your account.
    • ×   Pasted as rich text.   Paste as plain text instead

        Only 75 emoji are allowed.

      ×   Your link has been automatically embedded.   Display as a link instead

      ×   Your previous content has been restored.   Clear editor

      ×   You cannot paste images directly. Upload or insert images from URL.


      Once you submit your question, a new topic will be created for you in our forums. Our moderators may move your topic to a more suitable forum category if one exists. Members will see your topic and be able to respond to your question.

    • This will not be shown to other users.
Sign in to follow this  
mspecperformance

Body Shop Business Basics? Any Advice

Recommended Posts

Hey guys, wanted to know if I could get some feedback from those who are experienced.

 

I currently run a 5 lift/1 alignment German Car Specialty shop. We moved into our 5,000sqft location about 8-9 months ago from a small 2 bay shop. One of the nice perks of my currently location is the ability to legally run a body shop. If you are from NYC you can attest to the ridiculous rents and the abhorent zoning laws. It makes it a very very expensive investment to start up a stand alone body shop.

 

I still have sufficient room to install a paint booth and prep stations. I want to get my feet wet in the body shop business, I'd like to get some advice from some of you pros. Is there a resource where I can learn about how to effectively run a body shop? What management software do you guys use? Estimating software? Training courses?

 

 

Any advice would be appreciated.

Share this post


Link to post
Share on other sites


We allow visitors to read the first post of each topic. To read this post, please login or register for a membership. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Topics

    • By Alex
      We now have a nice tool available to all premium and platinum members under the tools menu, where you can view labor rates entered by our members on an easy to use map, similar to our member map. This is designed to give you an idea of where you are vs the market in your area. As you zoom in, the circle averages open up to more specific areas.

       
      If you aren't currently a subscribed premium or platinum member, you can upgrade here.
    • By hello5555
      We are expanding to a new shop shortly and in the market for a new alignment machine. Any suggestions? We have always had Hunter machines, but the cost of a new top of the line machine is a little out of hand. Has anyone had any experience with the Atlas or John Bean machines? Any info would be helpful. Thanks.
    • By Joe Marconi
      The mild fall appears to have caused a slow down for many shops. We have seen this before.  But, winter tempertures are here, and the threat of snow will boost repair shops.  
    • By Joe Marconi
      “Why are we discussing these issues when the people who need it the most are not here? We’re not reinventing the wheel. We get it. But the ones who don’t get it need to be here, too!” 
      Those were the words spoken by one of my service advisors during a recent meeting. We were discussing quality issues and ways to improve overall production, which, we determined, would improve sales and profit. I listened as Tommy (not his real name) continued for a few minutes. I could hear the frustration in his voice, so I let him speak until I felt he expressed all his feelings to the group. 
      I am a firm believer in holding regular meetings. And, while there are times when the group gives me feedback, rarely does anyone voice their opinion with such passion and intensity the way Tommy did that day. Drawing on experience, I thanked him for his openness and honesty. I also asked him if we could continue this discussion in the morning in private. He agreed. 
      The next morning, I paged Tommy and asked him to come to my office. I thanked him again for his openness and asked him to elaborate more on what he said the night before. Tommy hesitated at first, but slowly began to tell me his frustrations. It really boiled down to the level of commitment from a few techs. Tommy spoke in length about what he would like to change in the shop, and again repeated that we’re not reinventing the wheel. His words were clear and on point, “Joe, we all know what to do. We all know our goals. And we all know when we perform to the level we are supposed to. So, I just don’t understand why all of us can meet those expectations.” 
      Tommy’s insight into the work environment and the dynamics of people’s behavior was perhaps deeper than he even realized. When people within an organization feel that some of their coworkers are not pulling their weight, animosity begins to set in. Essentially, your top employees want to make sure that everyone is committed to the company’s success and doing their very best for the greater good of the team.
      We also need to remember that people look at things from their own perspective. And their perspective becomes their reality. The key thing is to keep the lines of communication open, learn from each other and try to view different situations from the viewpoint of others.  
      After nearly 30 minutes of discussion, it was time to give Tommy my input on how I viewed the situation. I let him know that, while not everyone will be in total agreement with how he views these concerns, he has made a giant step forward at letting me know the issues we have in the shop. I then asked Tommy, “Out of our 16 employees, how many people in your opinion, without giving me any names, do not live up to the expectations of the company?” Tommy thought for a moment and replied, “Well, when I think about it, just a few. Two, maybe three.” Here was my opportunity to bring logic into a very emotional discussion. “So, what you are telling me is that the majority of your coworkers do live up to the company’s expectations and do a quality job?” Tommy replied, “Yes, I didn’t see it that way.” I let Tommy know that I would take his ideas and implement them into my strategy to improve the work environment. He appreciated the fact that I listened to his concerns.  
      Here’s the bottom line. When a person speaks up like Tommy did—listen to them. Don’t shut them down. They are expressing more than their frustrations over a few of their coworkers. They are giving you real-life, from the trenches information. And although it may be from their perspective, their viewpoint can give you valuable information that will help you and your company improve. Even a few people not pulling their weight can be enough to affect morale. And others may be feeling the same way. 
      What you don’t want are “yes” people who merely agree with you because you’re the boss. No matter how uncomfortable it may be, welcome feedback and criticism from your key people.  We also need to listen more and speak less. And most of all, we need to understand that the solutions to our problems don’t always have to come from us. Sometimes, an employee’s outburst is just what we need to put things in the right perspective. 
      This story was originally published by Joe Marconi in Ratchet+Wrench on January 1st, 2020


      View full article
    • By JustTheBest
      Hi! Thanks for stopping  by. 
      I wrote this letter to help auto repair shop owners. There's nothing to buy

       
      Hope this helps!
      Matthew
      "The Car Count Fixer"
       


  • By Joe Marconi, in Automotive Management,

    By Joe Marconi, in Selling Automotive Repair,

    By Joe Marconi, in Automotive Management,

  • AutoShopOwner Sponsors



×
×
  • Create New...