Quantcast
Jump to content


Paper Dolls and Corralling Cows


Gonzo

Recommended Posts

Bob was an old regular customer, a real charitable kind of guy. He did a lot of work for, "Meals on Wheels, Churches," and several other organizations. A real caring kind of guy, but when it came to cars… he knew nothing, nothing at all.

 

One day he came into the shop with his early 80's Porsche with a weird starting problem. It would start great if you didn't shut it down for very long. Leave it off for more than an hour or so, and it would crank and crank before it came back to life again. Bob, being his usual cheerful self, waited in the lobby; while I took a look at his car.

 

That particular day my two daughters (Katie and Mandy) were on summer break from school, and were hanging out in the lobby while I worked in the shop. My wife was running the office at the time too; it was a little family day for all of us. Old Dad tooling away in the shop, the girls cutting out paper dolls, and mom keeping track of us all.

 

Bob was quite happy to help the girls cut out the paper dolls and draw faces on them. He seemed to enjoy the girls and there's no doubt the girls enjoyed the attention. I, on the other hand, was trying to figure out what was going on with his old Porsche. I spent a lot of time on this one, as it wasn't making any sense that it would run so well, but be so hard to restart. I checked several things that I thought might cause the problem, but still didn't have any answers. That is until I checked the fuel pressure.

 

On this older Porsche there wasn't a Schrader valve to screw a pressure gauge into. I had to remove a fuel line and install a pressure gauge "in-line" to read the actual fuel pressure. While it was running the fuel pressure was spot on. When I shut the car off the fuel pressure would slowly come down to its "rest" pressure and hold. I left the gauge installed, and went to work on other jobs in the shop, only coming back to it every now and then to see if it was dropping or not.

 

About 30 minutes later the fuel pressure was down to near zero. I reached in and turned the key. Strangely enough, the fuel pressure didn't bounce back up as quick as I thought it should, but after a couple of cranks the pressure was back up to normal and the car started fine. I knew to test this out further I was going to need a lot more time, so I thought I would run up front and see how much time Bob had today.

 

To my surprise, there was Bob sitting in one of the lobby chairs, paper dolls pinned to him from head to toe, and the two girls were not only drawing faces on the dolls, but also all over Bob. Up and down both arms were all kinds of scribbled notes. He was having the time of his life… laughing, giggling, with a smile from ear to ear. My wife had leaned over the counter about then and informed me the ink tattoos were a mutual idea between Bob and the girls. Hey, they were having fun, and Bob was content to sit out the rest of the day with the girls, so I was free to test all I wanted.

 

After several hours of trying different things to the car: clamping off the return line, letting it sit longer, checking the injectors for leaks, etc… I finally nailed down the cause of the problem. Another shop had just changed the fuel pump, and the new one didn't have the check valve on the end of it. I rushed into the office to tell Bob. He was still smiling, but not nearly as covered with paper dolls. Now they were drawing and telling stories. I had to interrupt their fun to let Bob know what I found. Being the ever-so-courteous individual he was, he didn't want to tell me he had the car out of town last week when it broke down, and had to have the new fuel pump put in.

 

I told him I'd take care of the problem, and that he could get back to his play time with the girls. After I exchanged the fuel pump with one that had the check valve it started every time, any time. Now the next thing to do was to explain it to Bob.

 

"What does a check valve do?" he asked.

 

I tried to explain it, but Bob wasn't grasping the concept. That's when one of my girls mentioned to him, "It's like a one way gate, Bob." (Smart kid) With that I had a way to explain it to Bob.

 

"Bob, let's say you have two corrals, one full of cows and one without any cows. You want to move the cows to the other corral so you have to open the gate. When you move the cows to the empty corral they can push the gate back open by themselves. But if you put them in the opposite corral, they can only push against the gate because it won't open from that direction. It's the same thing your car does with gasoline in the fuel line," I told my paper doll covered friend.

 

"Hey, I understand that… it makes sense now… so it's all because of cows that I'm able to start my car. Wow, I never knew."

 

You know, he's such a nice guy, and the girls loved having him in the shop. I didn't have the heart to tell him anything different. Cows, paper dolls, and his arms covered in little girl scribbles, there's already enough things going on that anything more technical wasn't going to help a bit, just leave it be. So if cows and a corral gate was a good enough explanation for him, it's good enough for me.

 

To this day if I pass a farm and I see a herd of cattle lined up at a corral gate I think of him. Standing there in the lobby, tattooed in ink scribbles and paper dolls pinned all over him. I know Katie and Mandy will never forget him either. He's one of a kind.

 

Quite a moo-oving guy.

 

 

I hope you enjoy my stories, if you do, leave a comment. It's the only way I know whether or not it's good enough to send onto my editors for publication. If you didn't know it, ASO members see all my latest stories before anyone else. Your input helps me put the final touches on the stories before they go out to the public.

 

So keep those comments coming. Don't forget to visit my website www.gonzostoolbox.com ENJOY! !


View full article

Edited by Gonzo
Link to comment
Share on other sites

  • Have you checked out Joe's Latest Blog?

         5 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Changing The Industry
      Episode 161 - Realities of Coaching in the Auto Industry & Customer Misconceptions with Matt Wagg
    • By carmcapriotto
      Thanks to our Partners, AAPEX, NAPA TRACS, and Automotive Management Network By leveraging tools like digital vehicle inspections (DVI) and customer relationship management (CRM) systems, businesses can significantly improve their operations and customer experience. These integrations allow for a more streamlined process, from diagnosing vehicle issues to maintaining consistent communication with clients. Ben Dexter, National Training Manager, NAPA TRACS Show Notes
      Ben's journey in the automotive industry (00:00:55) Ben's progression from service writer to National Training Manager and his experience in the automotive industry. Importance of shop management systems (00:02:04) The critical role of shop management systems in the automotive repair industry and the support provided by NAPA TRACS. Value of training (00:03:21) The significance of investing in training and the impact of leadership participation in training programs. Building customer rapport (00:11:22) Ben's approach to building customer rapport and the importance of effective communication and attention to customer needs. Significance of scheduling (00:13:12) The shift from reactive scheduling to a coordinated approach, addressing the issues of timely and accurate repairs through effective scheduling. The power of software integrations (00:15:37) The commitment to utilizing shop management software and the potential of integrations with other tools like DVI and CRM for business growth. Utilizing shop management systems (00:19:08) Encouraging the use of shop management systems and the availability of resources for business advancement. Role of technology in DVI (00:20:42) Discussion on the coordinated effort required for effective Digital Vehicle Inspections (DVI) and the benefits of real-time communication. Challenges in utilizing software (00:22:32) Exploring the reasons behind the underutilization of software tools and the need for effective leadership and training. Importance of testing and measuring (00:25:13) Highlighting the significance of testing and measuring business performance for improvement and growth. Communication and customer service (00:28:27) Emphasizing the importance of effective communication with customers to prevent unexpected breakdowns and enhance customer satisfaction. Impact of scheduling on service advisors (00:30:07) Discussing the influence of scheduling on service advisors' decision-making and the need for consistent customer recommendations. Rethinking business analysis (00:32:47) Encouraging a reevaluation of business statistics and reports to identify missed opportunities and improve overall business strategies. Morning Meetings and Reporting (00:33:21) Discussion on the importance of morning meetings, sales reporting by service writer, and constructive performance discussions. Maximizing Existing Resources (00:34:55) Emphasizing the significance of making the most of existing resources before seeking more car count. Linear Quantity Opportunities (00:36:32) Exploration of the linear quantity opportunities in parts matrix, addressing traditional matrix problems and opportunities for improvement. Commitment to Lifelong Learning (00:38:54) Highlighting the importance of lifelong learning for success in shop management and overall strategy. Thanks to our Partners, AAPEX, NAPA TRACS, and Automotive Management Network Set your sights on Las Vegas in 2024. Mark your calendar now … November 5th-7th, 2024. AAPEX - Now more than ever. And don’t miss the next free AAPEX webinar. Register now at http://AAPEXSHOW.COM/WEBINAR NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Get ready to grow your business with the Automotive Management Network: Find on the Web at http://AftermarketManagementNetwork.com for information that can help you move your business ahead and for the free and informative http://LaborRateTracker.com Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections            
      Click to go to the Podcast on Remarkable Results Radio
    • By Changing The Industry
      Chris Craig on Creating Positive Automotive Work Environments Even At A Dealership
    • By carmcapriotto
      This week on the ARM Podcast Brian talks about why stock website content doesn’t work. In this episode you’ll learn what he means by stock content, why it doesn’t work, whether or not it hurts you to have stock content on your website, and how to tell if you have it on your website.
      Thank you to RepairPal for sponsoring The Auto Repair Marketing Podcast. Learn more about RepairPal at https://repairpal.com/shops
      Show Notes with Timestamps
      What is stock content? Stock content is duplicate content Stock content is generic content Does stock content help? How do you know if your website has stock content?  
      How To Get In Touch
       
      Group - Auto Repair Marketing Mastermind
      Website - shopmarketingpros.com 
      Facebook - facebook.com/shopmarketingpros 
      Get the Book - shopmarketingpros.com/book
      Instagram - @shopmarketingpros 
      Questions/Ideas - [email protected]
      Click to go to the Podcast on Remarkable Results Radio
    • By tyrguy
      Hey all,
      Retired 5+ years ago and spend half my time down here in Florida. Haven't been on the forum in a few years. When I am up home in Ohio the tire dealer that bought my business and  rents my building from me takes good care of all my vehicle service needs. My Mini needs a few things and I'd like to hook up with someone from this forum close to me down here.
      Belt is squealing so probably needs a new belt, tensioner and idler pulley. Also need a new right side window motor.
      Anybody close to Fort Myers Beach?
      Mark Defer 330-603-5127


  • Our Sponsors

×
×
  • Create New...