Quantcast
Jump to content

Is Change always a Good thing


Gonzo

Recommended Posts

Is Change always a Good thing

 

A body shop dropped off a 2005 Nissan Titan XE for a trailer light problem. It was hit in the rear and had folded the bumper under the body. This particular body shop I have known for years, and they pride themselves on doing a top notch repair on every vehicle that they are associated with. This truck was being a problem though. All the systems were working except for the trailer turn signal lights. To be thorough, they went back thru each and every part that they had replaced or disturbed. Nothing, not a thing… 2 days of checking it out led to a dead end.

 

That’s where I came into the picture. As always, the first thing I want to see is the wiring diagram. You know, I’ve always said change is a good thing… this time, I should rephrase that to… it’s a good thing that “things change”… and I hope this does real soon, because, this was about the stupidest thing I’ve ever seen. It’s not the first time I have ran across trailer lights going thru computer systems but it’s the first time I ran across only the trailer turn signals running thru the BCM (body control module) not the trailer park lights, not trailer brakes… nope, just the turn signals. Right there on the print… plain as day… R-trailer turn and L-trailer turn… oh please… what were you dudes thinking? (Referring to the engineers)…What was the reasoning behind this?

 

I checked the rear wiring and all the circuits involved along the underside of the truck… all of which were in impeccable condition. I couldn’t help but stare at that BCM on the wiring diagram… I said to myself, “You mean to tell me I’m going to have to change an expensive BCM just for trailer lights… come on… guys?” (Engineers)

 

The BCM is attached to brackets just above the gas pedal. Once I managed to get into position to see the BCM, I moved the wire harness out of the way to get a better look at it. All of which looked great. Another glance at the print showed that pin 51 and 52 were the trailer turn signal wires, one yellow/black and the other green/black. Using a test light I checked the leads output signal directly at the BCM connector… I was so glad to see the test light flashing with the turn signals… what a relief… at least it’s not the BCM… it’s wiring in between the BCM and the rear connector. Another long stare at the print with my head under the dash, all wedged in between the driver’s seat and my feet dangling out the door, one hand holding the wiring harness out of the way… flash light by my right ear, the test light and the wiring diagram all getting cramped in what little space that’s provided… but I still couldn’t see the problem. Since I already checked the wiring running into the truck and the signal was coming out of the BCM I had to be close… real close. I was starting to understand why the body shop spent two days looking for the problem and couldn’t find it.

 

I knew what I had to do… start hand tracing the two leads again from start to finish… one-more-time. At this point anything would be better than spending another minute “sardined” in this truck. As I moved my arm out of the way and was about to slide out from under the dash I noticed right where I had my hand holding the harness out of the way were two small in line fuse holders… almost opaque in color right on the green/black and the yellow/black wires leading away from the BCM. AHA! THERE IT IS! Two in line 10 amp fuses to the trailer lights… Wowser!!! Fixed, done, works perfectly … the prints did not show any fuses in the circuits… it only showed the wiring leading from end to end. Unbelievable, no wonder the body shop couldn’t find the problem… I even missed it till I move my hand out of the way and knew the correct wire colors. It’s not the sort of thing I’d expect to find … factory fuse holders in-line with the BCM… but there they were, you can be guaranteed that I made a note about this one. I won’t forget next time.

 

It doesn’t help that the prints were wrong, and it doesn’t help that the manufacturer ran the trailer turn signals leads thru the BCM… so I guess I can officially change my status from “change is a good thing” to “good thing it changes” now do me a favor there engineers… Change it!

 

 

 

 

 

 

Link to comment
Share on other sites










Crazy, I think it's nuts....! ! If it isn't the customer not wanting to pay for a tough repair, it's the engineering, or the company that prints the schematics. There are so many different pitfalls everywhere you turn.... it's a wonder I don't keep safety lines attached to the roof beams to keep me from falling over everytime I get into one of these situations.

 

Oh, I charge them, I give them the option before I start and if they say YES, I'm going to go for it.... .... .... yea I know, I'm still going to get an argument... "Why does it cost so much." It never ends....

 

I'd like to back charge the engineer

 

 

Doesn't stuff like that just drive you crazy. That poor design caused the body shop and you to take all of that time to find what I call a "Mickey Mouse" problem. Who winds up paying for all of those hours? It is hard to convince a customer that it took four hours or $200 or whatever it was to find a blown fuse. We recently had a car that drove us mad with a very intermitten running problem. When the issue was finally solved it was with the battery.

Link to comment
Share on other sites

  • Have you checked out Joe's Latest Blog?

         5 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Changing The Industry
      The Basics of Owning An Auto Repair Shop - Balancing GP per Hour and Productivity
    • By Changing The Industry
      Episode 162 - Lauralee Schmidt on Repair Shop Economics and Social Media Slips
    • By carmcapriotto
      The Weekly Blitz is brought to you by our friends over at Shop Marketing Pros. If you want to take your shop to the next level, you need great marketing. Shop Marketing Pros does top-tier marketing for top-tier shops.
      Click here to learn more about Top Tier Marketing by Shop Marketing Pros and schedule a demo:https://shopmarketingpros.com/chris/
      Check out their podcast here: https://autorepairmarketing.captivate.fm/
      If you would like to join their private Facebook group go here: https://www.facebook.com/groups/autorepairmarketingmastermind
      In this podcast episode, Chris Cotton from Auto Fix Auto Shop Coaching addresses the negative impact of phone trees on customer service in auto repair shops. He emphasizes the importance of the human touch and shares his frustration with complex phone systems that deter customers. Chris offers practical advice for revamping phone systems, such as auditing current setups, matching staffing to call volume, and soliciting customer feedback. He advocates for a balance between technology and personal interaction, stressing that each call is an opportunity to showcase excellent service and stand out from competitors. Chris concludes by inviting listeners to contribute to the conversation on maintaining a personal touch in customer service.
       
      The importance of human touch in customer service (00:01:05) Chris discusses the negative impact of phone trees on customer service and the need for a human touch. The drawbacks of using phone trees (00:02:07) Chris explains how phone trees can frustrate customers and lead to missed opportunities. The value of personal interaction in customer service (00:05:21) Chris emphasizes the importance of human connection and empathy in the customer service experience. Balancing automation and human interaction (00:07:31) Chris discusses the need to strike a balance between technology and human interaction in the auto repair business. Practical tips for revamping phone systems (00:09:33) Chris provides practical suggestions for improving phone systems to better serve customers and enhance the overall customer service experience.  
       
       
      Connect with Chris:
      [email protected]
      Phone: 940.400.1008
      www.autoshopcoaching.com
      Facebook: https://www.facebook.com/
      AutoFixAutoShopCoachingYoutube: https://bit.ly/3ClX0ae
       
      #autofixautoshopcoaching #autofixbeautofixing #autoshopprofits #autoshopprofit #autoshopprofitsfirst #autoshopleadership #autoshopmanagement #autorepairshopcoaching #autorepairshopconsulting #autorepairshoptraining #autorepairshop #autorepair #serviceadvisor #serviceadvisorefficiency #autorepairshopmarketing #theweeklyblitz #autofix #shopmarketingpros #autofixautoshopcoachingbook
      Click to go to the Podcast on Remarkable Results Radio
    • By Changing The Industry
      Dealer Throws Lucas Under Bus #podcast #autorepairshop #autorepairbusiness #carrepair


  • Our Sponsors



×
×
  • Create New...