Quantcast
Jump to content
    • You can post now and register later. Already registered? sign in now to post with your account.
    • ×   Pasted as rich text.   Paste as plain text instead

        Only 75 emoji are allowed.

      ×   Your link has been automatically embedded.   Display as a link instead

      ×   Your previous content has been restored.   Clear editor

      ×   You cannot paste images directly. Upload or insert images from URL.


      Once you submit your question, a new topic will be created for you in our forums. Our moderators may move your topic to a more suitable forum category if one exists. Members will see your topic and be able to respond to your question.

    • This will not be shown to other users.
Gonzo

Article: EGO vs. Abilities --- Sometimes your ego is your worst client

Recommended Posts

EGO vs. Ability
 
tp.gif        For some reason, especially in the auto repair business, 
there’s a tendency for the ego to overshadow the actual abilities 
for a lot of mechanics. Sure, I can say my ego has stepped over 
the line a time or two, but for the most part, the ever changing 
industry usually keeps a person humble.  
 
tp.gif        For some guys, there’s no stopping their ever-unchecked ego 
from stepping out beyond their tool box. Especially, if they’ve 
landed a position that is far above their abilities. Some of them 
reach beyond the typical, “I know more than you do” level, to a 
status where their ever-enlarging ego has no boundaries, 
regardless if they are even qualified for such a position. 
 
tp.gif        If you ever have wondered if you’re that type of person 
or not, take this little survey and let’s see. Answer the following 
questions as truthfully as possible. Answer each question – yes or no. 
 
1.tp.gifI know all there is to know about cars.
2.tp.gifAll the other mechanics are below my abilities.
3.tp.gifCustomers come to me because I’m the best there is. 
4.tp.gifHave you ever said to another mechanic, “Get out of my way, I’ll take care of this.”
5.tp.gifI don’t need to take advanced classes, I should be teaching them.
 
        If you answered any of these questions with anything other than ‘NO’, you probably need to check your EGO at the door.  
 
        It’s not hard to spot these egotistical mechanics though. We’ve all ran into one at some point in our careers. You know, that one guy that runs his mouth all the time, or walks by each service bay shouting louder than everyone else while making claims he could fix that problem faster than you can. That one guy who, when given some authoritative position, turns into a ‘mini-Hitler’. Or, the one who can’t seem to finish his own work, but at the same time, he’s awfully chummy with the boss. The kind that swings into action if the boss says ‘jump’, but never actually accomplishes a thing. Yes, we all know ‘that’ guy. Worse yet, is when these type of individuals break their ties to the tool box and move to other aspects of the auto repair industry. Like the front office. 
 
        When I was first starting out, I worked at a small local dealership as a helper. I wasn’t even what you might call an apprentice because I wasn’t assigned to a mechanic or strictly to the mechanic shop. I was more the guy who cleaned up the bays, held tools, and brought parts from the warehouse to the service bays. Everybody was great, and encouraged me to learn more and more. All but this one guy. It wasn’t long before it was universally known throughout the entire building that ‘this’ was our egotistical wrench head of the shop. 
 
        This guy had something to say about everything. You couldn’t even sweep a floor or roll up a hose without him saying something demeaning or repulsive. But, it only got worse. Apparently, his boisterous attitude made it all the way to the front office. But, being the ‘non-car-front-office-people’ that they were, and since this guy couldn’t stay in his own bay long enough to finish anything, they made the assumption he must be their gift from the wrench gods. Which, in turn, must mean he deserved a promotion to bigger and better things. They made him the shop super. 
 
        Now, his ‘little-Hitler’ mentality came out with a vengeance. Nobody was safe from the torrential down beating this guy dished out. Even with numerous complaints, the dealership head honchos still believed he walked on water. His greatest skill was not wrenching, or diagnosing, but getting rid of anyone that said anything against his ideas, or even remotely showed any signs of intelligence beyond his mental capacities. (Didn’t take much by the way) 
 
         It wasn’t long before his ever oppressive antics started to affect the quality of work and the number of customers that used the dealership service department. Soon, every tech that was left had had enough. They were all packing up their tool boxes and heading down the road. After a while, even the need to have some young kid sweeping floors and running parts back and forth wasn’t needed, because there were more empty bays than full ones now. 
 
        This egotistical maniac even thought he could teach the other mechanics and helpers something about the auto industry that apparently … only he understood. His method of instructing was appalling. It usually consisted of him shouting at the top of his lungs from the front of the room, while showing the aspects of some out of date process. He even had his own homemade jargon and squirrelly nicknames for these long forgotten components which only fit a cars that haven’t seen a service bays for decades. All the while, pointing a three foot long piece of dowel rod like if it were some sort of magic wand. 
 
        It was more like watching a circus clown trying to explain advanced quantum physics. His true attitude was even more apparent if you asked for help on something. Instead of helping, he would come over and take whatever it was you were working on and rip it completely back apart, then telling you that you did it wrong. Ya know, if you already ‘knew’ you did something wrong, how is starting over from the beginning ever going to help? Two wrongs don’t make a right, and you ‘still’ don’t have any clue what you’re doing. 
 
        But, as with a lot of these ego driven socket jockeys and little Hitler attitudes, it’s just a matter of time before upper management takes notice. However, for this dealership, it came bit too late. The place closed due to lack of work. Like ya didn’t see that coming.  
 
        So, why am I bringing this up? It’s not funny, it’s not technical… what gives? What’s the whole point of this story? It’s for you to consider the results of your actions when you’re talking with a customer or for that matter another mechanic. The fact that a customer or fellow mechanic doesn’t know what you know, is probably the very reason your customer or that mechanic was asking you for your advice.  
 
        You may find that technology is starting to pass you by because you’ve spent way too much time telling everybody that you know it all, instead of studying that very technology you claimed you knew. (You can only BS them for so long) Maybe, it’s time for you to eat a little humble pie and accept the fact that you need to advance your training just to be able to do what you thought you already knew how to do. 
 
        It’s easy to find yourself in this business thinking you’re above reproach. But, honestly, we all can learn a lot about the make-up of today’s cars and even more about helping other technicians and mechanics without going to the point of becoming the next little Hitler. 
 
        Years ago a mechanic’s job was all about turning bolts, twisting screws, and adjusting cables. Today, the stereotypical mechanic doesn’t really have a place in the service bay on a daily basis. Tomorrow’s tech is here today. That’s the guy or gal that is heavily involved with advanced electronics, data lines, and computer strategies, but they still need to turn those nuts and bolts just like before. Above all, the auto repair business is on the brink of being so sophisticated of a career choice that the shade tree adventurer will be hard to find.  
 
        Every mechanic needs to learn and understand today’s vehicles to be profitable and to be respected in the industry as well as with their clients. It may take a while to bring the world of automotive repair up a few notches from that old stereotypical mechanic we all knew. But, we could all start by showing a little more respect to others, as well as ourselves and especially to our fellow mechanics. 

View full article

  • Thanks 1

Share this post


Link to post
Share on other sites

We allow visitors to read the first post of each topic. To read this post, please login or register for a membership. 

  • Haha 1

Share this post


Link to post
Share on other sites

We allow visitors to read the first post of each topic. To read this post, please login or register for a membership. 

  • Haha 1

Share this post


Link to post
Share on other sites

  • Similar Topics

    • By Noah Harrison
      So I have a towing business and I’m looking at opening a repair/body shop, trying to figure out how to go about getting into that industry.
      any input helps
      thanks in advance!
    • By nptrb
      Hi, Natalie here. You have a great selection of tools on hand that will cover every job a customer will bring into your shop. Whether it’s Mac Tools, Snap-on, OTC, or Wright, the right tool for the job is priceless.
      The tools we’re talking about in this post are for finances, but the same strategy holds true. If you’re planning to do your own bookkeeping, the right tool for your financial job is also priceless. They can take what may appear to be a daunting challenge and save you a ton of time. You’ll be back to running your shop before you know it.
      Stick around until the end and I’ll outline what’s in my bookkeeping toolbox. Here is an overview with some suggestions on how to choose great financial tools
      Here are the top 10 categories:
      1. Accounting Software
      QuickBooks has been the go-to software for accounting for decades. There are online tools that may be a better option for you. The most popular choice is Xero and the numbers of small business owners that are using Xero is increasing. Compare several and pick the one that is both robust and flexible.
      According to the 2015 edition of the Business News Daily’s Buyer’s Guide here are the features you should look for:
       Invoicing
       Expense Tracking
       Client/Vendor Contact Management
       Billing and Recurring Payments Automation
       Quote and Estimate Creation
       Tax Preparation
       Multiple-User Access
       Payroll Processing
       Mobile Access
       Integration with Programs Such as Point-Of-Sale Software, Credit Card
      Processing, and Google Apps
      2. Budgeting Tools
      Creating a budget is the cornerstone of your shop’s financial success. Staying on task within your budget is equally as important. If your accounting software has this feature, you may already have the proper tool to create that budget. If your preference is a tool dedicated to this task, a recommendation is PlanGuru.
      3. Payroll Management System
      Payroll management can occupy so much of your time and mistakes are easy to make. Look for tools that streamline the payroll process and cut costly errors. A tool that integrates with your other tools is another feature to look for. Some tools like SurePayroll can calculate and pay payroll taxes. Simple. A couple of other tool suggestions are ZenPayroll and ADP. These combine payroll and HR functions in one.
      4. Agile Billing
      Speed and flexibility in your billing process means quicker cash flow back to you. With a tools like FreshBooks or Bill.com the billing process will be quicker and give your customers an easy experience. Improving the billing process will serve you and your customers better and shorten delays in receiving payments.
      5. Financial Dashboard
      The dashboard gives you a quick look at your shop’s financial health. See at a glance if your shop is thriving or surviving. Tools such as LivePlan or InDinero give you clear visuals and show you if you’re starting to go off course. Then you can take the actions to keep moving towards your financial destination.
      6. Cash Flow Analysis
      Your accounting software should have cash flow statement capability. As with the budgeting tools there are specialty tools for cash flow tracking. A couple of suggestions are Float or a simple spreadsheet. These give you patterns from the past to offer a forecast of your shop’s financial future.
      7. Inventory Management
      This is all about efficiency and tracking. From the purchase of parts and consumables to generating sales reports and low inventory alerts, this is a very valuable tool. A couple of cloud-based options are SOS Inventory and Scout’s top Shelf.
      8. Expense Tracking
      Those tiny expenses can quickly add up and may be hard to track. Using an expense report tool such as Expensify or Xpenditure makes this much easier. Track those meals, gas, and incidental expenses by scanning receipts and typing in cash expenses. Some tools have the capability to link to mobile devices helping to track these instantly..
      9. Business Credit Card
      A business credit card, when used properly has several benefits
       Improve your shop’s credit history
       Earn higher credit limits
       Receive rewards and discounts
       Manage employee cards (ease of tracking expenses)
       Boosts employee morale due to convenience and trust
      10. E-commerce Solutions
      Imagine your customer paying for their oil change before the service is completed. They need a couple of quarts of oil to tie them over. It’s easy to buy them online from their trusted repair shop.
      Many businesses have seen an increases in cash flow since the beginning of the pandemic by using E-commerce solutions. These are powerful and create revenue streams that you may not have thought of.
      11. Three Rivers Bookkeeping
      With my 5-years of experience, these are the tools I use:
       Accounting software – QuickBooks
       Payroll Management System – ADP
       Agile Billing – bill.com
       Financial Dashboard – LivePlan
      I’m passionate about books and service to my clients. If you’d like to have a conversation about tools and why I selected the one’s above, contact me. I can also outline the services I provide and why adding me to your team may make perfect sense to you.
      Saving you time and headaches is the value I bring to you, the Auto Repair Shop Owner.

      View full article
    • By AutoShopOwner
      Massachusetts voters are deciding in this year’s election on whether they---and not the vehicle manufacturers---have control over the repair data generated by the vehicle they purchased.
      The Auto Care Association and the Coalition for Auto Repair Equality (CARE) have supported efforts by the Massachusetts Right to Repair Committee to obtain public support for ballot Question 1, which would give the consumer choice in vehicle repair. 

      “While the battle has been hard fought and expensive, the Auto Care Association is pleased that the most influential publications in the state have seen through the negative advertising campaign being funded by the vehicle manufacturers and have unanimously urged their readers to vote ‘yes’ on Question 1,” said Bill Hanvey, president and CEO, Auto Care Association. “We trust that voters in the state will agree with these publication that the right to repair is important and that advances in vehicle technology should not be used to limit the ability for owners to have their vehicle repaired by the shop of their choice."

      These “‘Yes’ on Question 1” endorsements include: 

      The Boston Globe on Oct. 13 declared, “The reason the new Right to Repair measure should pass is simple: It is inherently unfair for car manufacturers to have sole access to a vehicle’s mechanical data, because it gives their dealerships an advantage over independent auto-repair shops. That ultimately hurts consumers, because with limited options come higher prices.”

      The Boston Business Journal on Oct. 15 maintained, “Without the ability to repair cars equipped with wireless electronics, repair shops will see declines in business in coming years as car owners are forced to get repairs done at more expensive dealerships. In the end, more of the millions of dollars that Bay State residents spend every year to fix their cars would go to out-of-state manufacturers. More neighborhood car-repair shops will go out of business."

      The Sun Chronicle on Oct. 21 stated, “…we think the opponents of the law have done themselves no favors by overhyping the risks it poses. For example, the ‘No’ campaigners lean heavily on a statement from ‘Jane Doe Inc.,’ a Massachusetts advocacy group against domestic violence and abuse. But, on its website, that group now says its position on the referendum has ‘evolved’ and, while saying it’s staying neutral, complains that it’s wrong to use the fears of abuse survivors to promote a political position. For that alone, we think the opponents of Question 1 deserve to get their comeuppance at the ballot box.”
      The Berkshire Eagle on Oct. 21 stated, “Question 1’s opponents had ample opportunity to explain why this lobby should keep a monopolistic grip on your car’s telematics. They instead spent their campaign dishonestly fear-mongering in an attempt to distract consumers from asking why carmakers should be able to flout the spirit of the extant Right to Repair law to drive more repair jobs to their dealership garages. Hopefully voters will see through this charade.”
       
      For more information about the Right to Repair ballot initiative in Massachusetts, visit massrighttorepair.org.
      Source: https://www.autobodynews.com/index.php/northeastern/item/21245-right-to-repair-ballot-initiative-endorsed-by-major-massachusetts-news-publications.html?start=1
    • By AutoShopOwner
      HYANNIS – Proponents of Question 1 on the November 3 ballot say that independent auto repair businesses need access to data collected by cars in order to fix vehicles, while opponents say that Question 1 could risk owner’s personal data as well as safety.
      If Question 1 is approved, cars 2022 model or newer must be equipped by manufacturers with a standardized, open access platform that would allow auto repair shops to wirelessly access mechanical data using a smartphone-based app with owner’s permission.
      Currently, telematics data generated by sensors in the cars is transmitted to servers only the automakers can access.
      Supporters of Question 1 say that the telematics data only being available to the manufacturer means car owners must take the car to its original automaker to receive service and make repairs, diminishing consumer choice in where they can take their cars.
      “If a person goes out and buys a car, they should own the data that enables that car to be fixed, and they should be able to choose where they want the car fixed. If shops like mine don’t have that information, then we can’t fix the car, which kind of forces someone to go to a place where they don’t want to go,” said Robert Wallace, President and Treasurer of Cape Tire and supporter of Question 1.
      Wallace said that the limits on customer choice on where they can receive service for their car will lead to a monopolization of the industry by car manufacturers, with a rise in prices and a drop in quality service.
      Wallace said that he and other supporters would be willing to purchase the data, similar to how the auto repair shops already purchase parts, and that they are not requesting that the data be made available for free.
      “We’re willing to pay for it, we just want the information to keep our customers rolling.”
      Conor Yunits, spokesperson for the Coalition for Safe and Secure Data which opposes Question 1, said that the issue of telematics is already covered under the right-to-repair-law that was introduced in 2013. 
      “It specifically says that any information necessary to diagnose and repair a vehicle that is provided to dealer repair shops and only available through telematics must be made available to local repair shops. This is already covered,” said Yunits.
      Yunits said that currently data is only sent to secure servers owned by manufacturers, then to repair shops or customers through secure systems developed with the automaker.
      According to Yunits, Question 1 would prevent manufacturers from being a part of the development process of security systems and apps that share the information in the future, sacrificing a layer of security for consumers.
      Yunits also said that Question 1 unnecessarily risks owners’ personal data by creating opportunities for bad actors outside as well as inside repair shops to access personal data wirelessly.
      While mechanics or others may be able to intercept and use the data for malicious purposes, Wallace said that is a risk that comes with a lot of modern technology, such as cellphones and other smart devices that collect data on their users, and that it is up to the customer to decide whether they want to take that risk.
      Yunits also said that Question 1 would also force car manufacturers to comply with an unrealistic timetable which would be impossible to do in a safe and effective manner, with new requirements that would be enforced as early as January 2021.
      Source: https://www.capecod.com/newscenter/cape-cod-auto-shops-pushing-for-question-1/
    • By Joe Marconi
      I can't speak about all businesses in my area, but the repair shops are doing ok. In fact, most had a normal or near normal summer.  A few weeks back we had a major storm that knocked out power for nearly the week. That killed the week. But aside from that, we had a very good June, July and August.   With a miserable March and April, this was a great morale lift and financial boost.
      The only  down side is the affect COVID is having on other businesses, like restaurants, deli's, sport businesses and other businesses. Will this have a trickle down effect on our industry.  No one can tell for sure.
      I will be shoring up my finances and preparing for the unknown. 
       
       
       


  • AutoShopOwner Sponsors



×
×
  • Create New...