Quantcast
Jump to content

Recommended Posts

Posted

Hi all,

 

I need some help; my husband I and run our automotive business. He does the work; I do the paperwork; we currently have 1 full time employee. We have been in business for about 5 years. We are suddenly super busy, even in January which has never happened. Our shop rate is $80.00 an hour. We have 1 lift but can fit a car in front of it;

 

So even though they are working overtime; it seems as if we can never get ahead of the overhead; rent payroll insurance.

 

My husband uses the billable rates from shop key; but when it comes to diagnosis time we feel we cannot bill them for the amount of time it takes sometimes. We have a 5 star rating on yelp and have generations of families coming to us now.

 

Also, his employee cannot diagnose so its all him; He is good with brakes, oil; stuff that he can start and finish.

 

So I'd like to get another lift, as other than raising our fees not sure of how else to make more money. Any help would be appreciated!

 

Thank you

Denise and Steve Thiel

Posted

I think its best to start with your labor rates and margins first. Fix that first before trying to expand or hire another tech or buy more equipment. Make sure you are making money with every job and margins are correct.

 

Money robbers are:

-diagnostic time(not billing for it)

-items not being billed to customer (miscellaneous shop supplies)

-not selling recommended work

 

Are the few. But its a place to start. Goodluck!

 

 

Sent from my iPhone using Tapatalk

Posted

I definitely understand where you're coming from. I started from my own home garage and had a scissor lift. Sure I made profit but it was measly. I moved into a shared building and I had 3 lifts (2 2 posts and 1 4 post) but only had 2 bay doors so really I could only do 2 cars at a time unless the one on the 4 post was a big job. At that location, I too only had one other tech and I did all the diag. Never lost money but didn't really make any either..... maybe like $2k a month?

 

I took a big chance and signed a 63 mo lease and paying $4035/mo and got a 6 bay shop. Now I have 5 employees and making money. If you're going to expand, EXPAND. Your husband is lucky to have you support him. I can't see how you're making money with only 1 lift. If you are having too much work then you have to hire and you have to move in order to fulfill it. It's getting the customers that is the tough part.

 

Every so often you get a car that you lose out on. Broken bolt or wrong diag... whatever the reason, if you only have 1 lift then you aren't making money from other cars. We have jobs that we lose out on all the time but I have 4 other guys that are making money

Posted

I would suggest that you get a firm grasp of what your financial are and what it's really going to take to make money. My guess is your labor rate is absolutely too low for your area. Even if you are getting a good margins now on labor (meaning your husband pays himself a low wage and your worker is paid a low wage vs what your labor rate is) it will soon climb as you grow and hire more techs that are going to demand a higher wage. Also gaining some knowledge as to why you are busy now. Is it a fluke? Do you have more business because another shop closed down? Have you done any particular marketing initiatives that are bearing fruit? Is it repeatable?

 

The best piece of advice I think that I can give you is to find a business coach. Someone from the industry not outside of it. There are tons of consulting companies out there and I can give you some recommendations if you are interested. You can learn a lot of stuff on your own by reading, research and networking but you will accelerate your business tremendously if you have some help.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics



  • Our Sponsors

×
×
  • Create New...