-
Have you checked out Joe's Latest Blog?
-
.thumb.jpg.2b345efc275b9df0af2bbb306a10a78a.jpg)
By Joe Marconi in Joe's Blog13 commentsMost shop owners would agree that the independent auto repair industry has been too cheap for too long regarding its pricing and labor rates. However, can we keep raising our labor rates and prices until we achieve the profit we desire and need? Is it that simple?
The first step in achieving your required gross and net profit is understanding your numbers and establishing the correct labor and part margins. The next step is to find your business's inefficiencies that impact high production levels.
Here are a few things to consider. First, do you have the workflow processes in place that is conducive to high production? What about your shop layout? Do you have all the right tools and equipment? Do you have a continuous training program in place? Are technicians waiting to use a particular scanner or waiting to access information from the shop's workstation computer?
And lastly, are all the estimates written correctly? Is the labor correct for each job? Are you allowing extra time for rust, older vehicles, labor jobs with no parts included, and the fact that many published labor times are wrong? Let's not forget that perhaps the most significant labor loss is not charging enough labor time for testing, electrical work, and other complicated repairs.
Once you have determined the correct labor rate and pricing, review your entire operation. Then, tighten up on all those labor leaks and inefficiencies. Improving production and paying close attention to the labor on each job will add much-needed dollars to your bottom line.
-
-
Similar Topics
-
By carmcapriotto
Get a behind-the-scenes look at shop owner Tom Sciortino's new ADAS unit. Find out why he waited until now to purchase it, the learning curve with service information, why it is important to educate both the customers and local shops, and a step-by-step guide to how it works.
Tom Sciortino, Total Automotive, Buffalo, NY. Tom’s previous episodes HERE
Show Notes: Autel 900- ADAS unit plus it's an alignment machine We have to educate not only the consumers but the other shops, because any change in geometry, any change in the vehicle, you should at least confirm that it's in calibration. It may not always set a trouble code. Learning curve to find service information You have to be able to read service information and be able to follow procedures. Static and dynamic calibration Use the scan tool for the calibration process to access the computer system, scan the vehicle, and also communicate with the equipment to move the equipment up, down, and go ahead and do the adjustments There's also a screen up mounted high, so you can rotate that towards the car. It's a touchscreen so you don't have to keep coming behind the unit. The software walks you through the process step by step. It tells you what targets to set up, what steps to do on the equipment, what adjustments to make on the equipment, and walks you through it step by step. Documentation is huge because of the liability involved if someone gets into an accident. Digitally attach reports to work orders and take pictures with a tablet. Organize targets in cabinets with labels Lighting is crucial- changing the entire shop to LED and painting the ceiling
Thanks to our Partner, Dorman Products. Dorman gives people greater freedom to fix vehicles by constantly developing new repair solutions that put owners and technicians first. Take the Dorman Virtual Tour at www.DormanProducts.com/Tour
Connect with the Podcast:
-Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections
Click to go to the Podcast on Remarkable Results Radio
-
By Ruben Van Zenden
Today, we simply cannot ignore social media, everyone is using it whether you are a fan or not. Personally, I think it has its negative and positive sides.
I have been looking at 100+ car repair shops and noticed that only a hand full are using social media marketing, for example, Facebook advertising.
Why are so few car repair shops making use of this, in my opinion, great opportunity to increase car count?
-
By carmcapriotto
Will diagnostic work overtake remove and replace work? How will you position and present your shop as a technologically advanced repair center? What training will our employees need? How will artificial intelligence impact our industry? Will we be prepared? Join Jake Sorensen, Chris Chesney and Derek Kaufman as they discuss the shop of the future. Jake Sorensen, 2019 NAPA ASE Technician of the Year and 2019 Ratchet + Wrench All-Star technician of the year. Shop manager and diagnostic technician at McNeil’s Auto Care in Sandy, UT Listen to Jake’s previous episodes HERE
Chris Chesney, Training and Organizational Development, Repairify. Chris’ previous episodes HERE
Derek Kaufman, Managing Partner, Schwartz Advisors, President of C3 Network. Listen to Derek’s previous episodes HERE
Show Notes:
Looking up and reading service procedures is already a must, but even more so as technology advances. Example: ADAS systems now require calibrations when performing repairs like an alignment or bumper cover removal. If you change a headlight assembly that requires bumper R&R, you may need to perform a radar calibration. The only way to know for sure is to read service information. Reading technical information/technical reading skills- much different than reading newspaper or Facebook posts, a book etc. Evelyn Wood speed reading course- reading with purpose An explosion of information- computing power for all industries 2022 captures over a trillion data points that will be aggregated to provide insights AI- mining data for trends Diffusion of innovation curve- 17+ years for EV’s We have expected Technicians to be masters of everything. Many better diagnostic technicians are inefficient at R&R and do not enjoy it. Shift mindset to a technology industry Even today, electric vehicles account for 18% of new vehicles sold, and those won't be in our bays tomorrow. By 2030 the population of vehicles in operations, over 300 million, and only 8% will be electrified. Get ready, or some other service industry will beat you to the punch How are you presenting your shop to the public?
Thanks to our Partners Shop-Ware and Delphi Technologies Shop-Ware: More Time. More Profit. Shop-Ware Shop Management getshopware.com Delphi Technologies: Keeping current on the latest vehicle systems and how to repair them is a must for today’s technicians. DelphiAftermarket.com
Connect with the Podcast
Aftermarket Radio Network
Subscribe on YouTube
Visit us on the Web
Follow on Facebook
Become an Insider
Buy me a coffee
Important Books
Support our partners:
Click to go to the Podcast on Remarkable Results Radio
-
-
By carmcapriotto
Erich and Lauralee Schmidt went to a 4 day work week during COVID and haven't looked back. They also have an app for their shop with benefits to customers.
Erich and Lauralee Schmidt, Schmidt Auto Care, Springboro, OH Show Notes:
4 day work week- exhaustion during COVID, started cutting Fridays with three day weekends. Prefaced it as summer hours and would go back to 5 days in the fall. They never went back to 5 day work week. Revenue, productivity, and efficiency increased. 8-7 pm work hours. The check-in process includes 4 day work week schedule. 40 hours of training a year minimum- observing efficiency, open communication, partnering with employees with their training. Training is a requirement when hiring employees. “Where are your interests?” Service Advisor=Serice Specialist Free Schmidt Auto Care App- started 6 years, App Fueled is a customizable garage for clients and a bevy of services outside of just communication. Special pricing, birthday specials, loyalty touch points. 30% of the customer base has the app. Had ADAS for 3 years, one of the first in the area to get it. Program and calibration.
Thanks to our Partner, Dorman Products. Dorman gives people greater freedom to fix vehicles by constantly developing new repair solutions that put owners and technicians first. Take the Dorman Virtual Tour at www.DormanProducts.com/Tour
Connect with the Podcast:
Aftermarket Radio Network
Subscribe on YouTube
Visit us on the Web
Follow on Facebook
Become an Insider
Buy me a coffee
Important Books
Check out today's partner:
Click to go to the Podcast on Remarkable Results Radio
-
-
-
Our Sponsors
.png.670cdba7e1e29bc28f538a6796dc62e3.png)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now