Quantcast
Jump to content

Diamond in the Rough --- --- --- Cheap cars are cheap for a reason ---

Gonzo

By Gonzo
in AutoShopOwner Articles

 Share

Recommended Posts

Gonzo Grand Master

Gonzo

Posted
Posted

Diamond in the Rough

 

 

I seem to run across the same type of people over and over again who think the great deal they got on this used pile of junk is the best thing since sliced bread? It doesn't matter what year the car is, or what kind of car it is… if the deal sounds too sweet it is probably going to sour your pocketbook. It's not hard to spot these individuals in a crowd. They're usually beaming with pride, and even prouder to tell you what they just paid for the latest conquest. I find it rather comical in a way to see how they are so eager to tell me all about their "high value-low cost" wonder of the auto world.

 

There have been several of them over the years, more than I can even remember; some have been bought without having been looked at all, or the price was so good the new owner didn't seem to care what was really wrong with it. I've had expensive cars to cheap runabouts dragged, pushed, and shoved into my service bays over the years, only to find out the real issue with these gems is something so serious that the car should have been sent to the salvage yard in the first place.

 

One time it was a little Honda that a new proud owner brought in to me. The car was really clean, well kept and looked like it had a lot of new body parts added along with a fresh paint job. (He bought it at an insurance auction, by the way.) The only complaint was a thump when you would take off from a dead stop and a constant rubbing noise coming from the engine. The new owner was told it only needed a new motor mount. I wish they would have checked with me before they bought it but, you know… it was "such a good deal" why bother with having it checked out.

 

The new owner put it to me this way, "I can't go wrong for the price I paid for it." Hmmm, I don't think his good deal would cover a broken engine block right where the front motor mount bolts onto the engine. Awe, too bad… another diamond turns into coal.

 

Then there was the guy who bought a 4 year old Cadillac out of state-never seen it, and drove all the way there and back. The previous owner said he wired the coolant fans so they would stay on all the time, and that it wouldn't take much to repair it if he knew a good electrical repair shop. He came straight to my shop, and was I in for a surprise! It wasn't only the fans that were wired up direct, but practically everything under the hood. The engine compartment had been on fire, and the entire engine harness and lighting harness was wired with one color wire…. black. Every splice was taped together without any solder or protection. How this guy made it as far as he did was a miracle. Needless to say, the repair was going to be more than the guy wanted to spend on it, so he decided to sell it to the next gemologist that came along.

 

Then, just this past week, I had a real gold digger make his way to my shop. Not only was this jacked up Dodge diesel pickup a banged up brute, but the guy took it to a transmission shop to have a new transmission installed… AND… he hadn't even bought it from the previous owner yet! So here's a guy buying parts for a vehicle he doesn't even own. Unbelievable… Oh, but it gets better… the transmission wasn't the only thing that was shot. The reason it was shot is because it's stuck in limp home, and the previous owner just kept hammering the pedal to the floor. That big Cummins engine just tore the transmission up. My job was to find out why it was in limp mode. Not only was it in limp, but there wasn't any communication to the PCM. One look at the harness told the story. This truck was a 98 model and had seen better days a long time ago. Looked to me as if somebody thought they could get real creative with the wiring, and had more spliced in goodies everywhere I looked than I've ever seen on any other vehicle before. Well, so much for this repair job. You know this is going to be more expensive than this guy wants to spend.

 

Now what does the fella do? He doesn't own the rig, but he's put all his money into the transmission and has nothing left to finish the job… and… he still has to pay for the actual truck. I guess it's time to head back to the diamond mine and look for some more sparkly gems.

 

After all these years, I can't imagine looking at something as expensive as a vehicle, a house, or other big ticket item that I know nothing about, without consulting an expert.

 

There's no diamonds in the rough, people! Oh there's the occasionally "little old lady left me this car stories" but for the most part… cheap deals are not cheap, especially when it comes to cars. There are so many moving parts and problems to be considered, you just can't use your wallet as the deciding factor whether or not it's a good deal. Use some common sense, and don't just buy it because the price is so good.

 

My shop offers a "Pre-Buy" check up just as many other shops do. I'd take advantage of it; it's well spent money on a used vehicle, and not a wasted effort on your part. Look at it this way, the only thing you're out is the cost of the "Pre-Buy" you're not stuck with a diamond in the rough that is more than likely just another piece of "fools gold".

 

When a customer comes in and tells me they are looking at a new ride, I offer to do a "Pre-Buy" checkup on for them. If they refuse, because they don't want to spend the money with me to have it checked out, I just smile, and tell them…

 

"Good luck fella. You're going to need it. I'd bring your diggin' tools… 'cause I can almost guarantee that this diamond in the rough is going to have you digging one deep hole in your pocket."

 

 

I tell the stories about our daily lives in the automotive industry. You like them, let me know. As well as being a shop owner I'm also a monthly columnist for several trade magazines. Your input helps me decide which stories I send off to the editors. So in a way, everyone here at ASO gets to decide which stories go into print. So here's your chance...leave a comment... I really appreciate it. (In fact if you follow my column you get to see how much the editors change the stories from what I started with and what actually goes into print.) Gonzo :)

 

 


View full article

Gonzo Grand Master

Gonzo

Posted
  • Author
Posted

Sometimes makes ya wonder... why ya even bother to tell someone NOT to buy a paticular car. I've had the same thing happen to me. Honestly, I think they believe you "could" be wrong. That it's not going to take as much to fix, or some family/church/or neighbor has had different results than you've experienced over the years.

 

It's as if any expertise you thought you had in this business equals one big fat "ZERO" when the customer is influenced from other sources. I wish them luck... they're going to need it.

What is even worse than the diamond in the rough deal is the vehicle that wasn't a great deal but where the customer paid more than market price and it is still a piece of junk. I had a 16 year old girl stop at my shop with her mother at closing time recently with an overheating car an older Dodge Neon with 150,000 miles plus. She had bought it from a dealer the day before for $2,500. I raised the hood and took one look at it and found the radiator was full of rusty muddy water with no flow. At a minimum it would need a timing belt, water pump, probably a timing belt kit, a serious flushing, and probably a radiator, at least $700-$1000. I didn't look for any other problems. Her dad had "checked" the car out and bought it because it ran good. Ofcourse he didn't drive it long enough to heat up. Now they are going to have a family friend shade tree mechanic fix it and try to save money. I hate to think about how much money they wind up dropping into this piece of junk after the friend possibly screws it up more.

 

Those prepurchase inspections can save a lot of grief. We have prevented a lot of people from making horrible purchase decisions. Of course I will never forget the time that we inspected a hunk of junk Hyundai that had been wrecked and improperly repaired. Nothing fit correctly. We showed the customer all of the problems and basically advised against the purchase. They happily paid the inspection fee and then showed up at the shop two days later for us to do some work on this hunk of junk that they had happily purchased. They should have saved their money on the inspection because they didn't listen to a word we said.

 Share
Go to topic listing

  • Available Subscriptions

    See all Subscription Plans

  • Have you checked out Joe's Latest Blog?

    • Joe Marconi
      The Technician Shortage Is Our Fault, And It's Time We Own It
      By Joe Marconi in Joe's Blog
         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.

  • Similar Topics



  •
    Joe Marconi

    Every shop owner tracks gross sales. But is that really the number you should be focused on?

    By Joe Marconi, in Joe Marconi's Tips and Articles,

    0 comments 1 35 views
    Joe Marconi

    Marketing Strategies To Attract and Retain Your Ideal Customers

    By Joe Marconi, in Automotive Marketing,

    1 comment 7,924 views
    nptrb

    Mid-Year Reset: What Your Auto Shop’s Numbers Are Telling You

    By nptrb, in Automotive Management,

    0 comments 9 views

  • Our Sponsors

Main Sections

More Sections

Discussion Forums

×
×
  • Create New...