Advantages and Challenges of Artificial Intelligence in the Automotive Industry [THA 335]
-
Have you checked out Joe's Latest Blog?
-
.thumb.jpg.2b345efc275b9df0af2bbb306a10a78a.jpg)
By Joe Marconi in Joe's Blog0 commentsAuto shop owners are always looking for ways to improve production levels. They focus their attention on their technicians and require certain expectations of performance in billable labor hours. While technicians must know what is expected of them, they have a limited amount of control over production levels. When all factors are considered, the only thing a well-trained technician has control over is his or her actual efficiency.
As a review, technician efficiency is the amount of labor time it takes a technician to complete a job compared to the labor time being billed to the customer. Productivity is the time the technician is billing labor hours compared to the time the technician is physically at the shop. The reality is that a technician can be very efficient, but not productive if the technician has a lot of downtime waiting for parts, waiting too long between jobs, or poor workflow systems.
But let’s go deeper into what affects production in the typical auto repair shop. As a business coach, one of the biggest reasons for low shop production is not charging the correct labor time. Labor for extensive jobs is often not being billed accurately. Rust, seized bolts, and wrong published labor times are just a few reasons for lost labor dollars.
Another common problem is not understanding how to bill for jobs that require extensive diagnostic testing, and complicated procedures to arrive at the root cause for an onboard computer problem, electrical issue, or drivability issue. These jobs usually take time to analyze, using sophisticated tools, and by the shop’s top technician. Typically, these jobs are billed at a standard menu labor charge, instead of at a higher labor rate. This results in less billed labor hours than the actual labor time spent. The amount of lost labor hours here can cripple a shop’s overall profit.
Many shop owners do a great job at calculating their labor rate but may not understand what their true effective labor is, which is their labor sales divided by the total labor hours sold. In many cases, I have seen a shop that has a shop labor rate of over $150.00 per hour, but the actual effective labor rate is around $100. Not good.
Lastly, technician production can suffer when the service advisors are too busy or not motivated to build relationships with customers, which results in a low sales closing ratio. And let’s not forget that to be productive, a shop needs to have the right systems, the right tools and equipment, an extensive information system, and of course, great leadership.
The bottom line is this; many factors need to be considered when looking to increase production levels. While it does start with the technician, it doesn’t end there. Consider all the factors above when looking for ways to improve your shop’s labor production.
-
-
Similar Topics
-
By Joe Marconi
Premium Member Content
This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.
-
By Changing The Industry
Episode 141 - Embracing Change in the Automotive Repair Industry With Matt Ruffman
-
By carmcapriotto
Thank you to RepairPal for sponsoring The Auto Repair Marketing Podcast. Learn more about RepairPal at https://repairpal.com/shops
How To Get In Touch
Group - Auto Repair Marketing Mastermind
Website - shopmarketingpros.com
Facebook - facebook.com/shopmarketingpros
Get the Book - shopmarketingpros.com/book
Instagram - @shopmarketingpros
Questions/Ideas - [email protected]
Click to go to the Podcast on Remarkable Results Radio
-
By carmcapriotto
"Give Me 10 Mission: To provide a work-based learning model that any industry can utilize to bridge the skills gap. Combining classroom instruction with on the job work based learning opportunities. This program integrates the classroom with employers to create an introduction to a career path of the student's choice.
The program simplifies the relationship between an industry lead business and vocational education that can lead into a career path. We ask for no money. Our “ask” is for your time. Time to integrate a student into your business to create a career fit. It starts with 10 hours and can grow into a new employee. Can you “Give Me Ten?”
Sue Dixon, the creator of the "Give Me Ten" program, discusses the importance of collaboration between the automotive industry and education. The "Give Me Ten" program, which exposes students to the automotive industry and helps them explore potential career paths, is highlighted. The discussion also covers the need for updated curriculums, industry involvement, and the success of the "Give Me Ten" program in providing work-based learning experiences. Sue Dickson, Closs Tire & Auto Repair Inc, Waukegan, IL Sue's previous episodes HERE Show Notes:
The importance of collaboration with education (00:00:40) Discussion about the need for collaboration between the automotive industry and education to promote career pathways and work-based learning opportunities for students. Career pathways endorsement in education (00:03:30) Explanation of the career pathways endorsement in education, which requires students to complete 60 hours of career work-based learning in the transportation cluster. The "Give Me Ten" program (00:04:50) Introduction of the Give Me Ten program, which aims to simplify engagement between businesses and education by providing 10 hours of work-based learning opportunities for students to explore potential career paths in the automotive industry. The importance of collaboration between industry and education (00:09:15) Discussion about the need for collaboration between the automotive industry and education to update curriculums and provide work-based learning opportunities. Simplifying work-based learning and engaging businesses (00:13:02) Explanation of the importance of simplifying work-based learning and engaging businesses to create career pathways for students, with a focus on liability and industry standards. Starting the collaboration (00:19:47) Sue Dixon explains how to start building the Give Me Ten program in your own community and the support they provide, including a free consultation. Thanks to our Partner, Dorman Products.
Dorman gives people greater freedom to fix vehicles by constantly developing new repair solutions that put owners and technicians first. Take the Dorman Virtual Tour at www.DormanProducts.com/Tour
Connect with the Podcast:
-Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz
-Join our Insider List: https://remarkableresults.biz/insider
-All books mentioned on our podcasts: https://remarkableresults.biz/books
-Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom
-Buy Me a Coffee: https://www.buymeacoffee.com/carm
-The Aftermarket Radio Network: https://aftermarketradionetwork.com
-Special episode collections: https://remarkableresults.biz/collections
Click to go to the Podcast on Remarkable Results Radio
-
By Changing The Industry
Episode 140 - The Cost of Safety Negligence in the Auto-Industry With Brandon Dills
-
-
-
Our Sponsors
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now