Quantcast
Jump to content

Recommended Posts

Posted

Customer brings in his WRX wanting us to install his new tires, custom rims, and outfit with sensors. Ordered the same style of sensors that were in the OEM rims/tires. Our Autel MaxiTPMS TS601 couldn't read them or program them for some reason. Tech assumes that the car will magically program them and all will be well. Car is shipped and now I have an appointment for this Thursday to get it done correctly and beg forgiveness. The customer is very laid back and understanding. Me? I'm working on a thin as it is patience level. Does anyone have any suggestions on what they would do? I'm an owner and know only what I know. I have been searching for a solution online and unfortunately, my best Tech who could figure this out will be off when the customer returns. And I know I have an issue here with Tech and shop Manager letting jobs leave here unsure of the outcome. A simple road test would have revealed we didn't hit our target. Thanks in advance for any thoughts. 

Posted

Am I understanding your post correctly? You indicate that you ordered “the same style of sensors that were in the OEM rims/tires”.  Does this mean that you ordered and received OEM sensors from Subaru? Are you trying to clone OEM sensors using your Autel tool? OEM will not clone. Are you trying to initialize with four new OEM sensors in place? Is your Autel Tool updated with latest software and does it have the ability to communicate with a 2018 Subaru? Is there a reason why you did not use Autel sensors and clone the OEM sensors? If I misunderstood your post and you cloned Autel sensors with original sensors where are the other four tires, rims and sensors while you are trying to reset system? 

Posted

I have since spoken to Autel. I've spent two hours trying to speak with them/chat with them and get something going. Updated my tool and they said as long as you get their sensors you can program them. I'm going to give it a shot. We didn't use our tool to program the sensors as someone on staff thought the car would self-program which is a laugh. This is on me for not staying on top of this with my team. Will report back and see what we can do...

  • Like 1
Posted

I'm actually brining in the 433mhz mxtpmsensors from Autel. Will hook up to the WRX, get the ID's, program the sensors, install them, relearn procedure, and road test. If it works I will have a solution for these that I can package as individual or a set and make better margin while saving the customer some money. I had another setup that was supposed to work like this but didn't. We will see come Thursday. 

Posted

Programmed the MX Sensors from Autel to the car, installed, road test and tire light went away. The on-board display is still showing tire pressures that don't make sense and I'm scratching my head why we can program the sensors to the car, get them to turn off the TPMS warning, read fine with my tool but yet this. Part of the way there. 

Posted

Quick update: Did the relearn again, followed the instructions to the T, road test, and the car's system reads the MX sensors from Autel like it should. No dealer needed. 

Posted

No, the OEM sensors are a smaller style sensor head. These are a more common head size that fits in the TS601 that I have. It took some doing but it works and I expect future repairs to take less time. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics



  • Our Sponsors

×
×
  • Create New...