Quantcast
Jump to content

Recommended Posts

Posted

I've decided I need a smallish sandblaster cabinet for cleaning brake caliper brackets. I just sold my brake lathe that never got used to make room for it. If any of you have any advice before I make a purchase, I would love to hear it as I've never even used one. I'm not looking to go too cheap, I want it to work well and not be messy.

Posted

That's too cheap:) I'm not looking for something that has to be heavily modified to become mediocre. Because it will only be used for small items, I'm looking for something less than 32" wide to save some space as most commercial units also have some sort of dust collection that will need to be accounted for in the footprint. As of right now the Trinco Model 24 is in the lead unless someone changes my mind.

Posted

I looked at the Trinco Model 24 blast cabinet online and it looks like a very good choice.  I didn't find a price but if it falls into your window of features, then I vote to go for it!  That unit seems like the dust collector portion of the machine could be put outside the shop if need be.

I come from an automatic transmission repair background where excessive dust is not allowed.  Upon further research, all that Trinco makes are blast cabinets.  They've been making them since before I was born. 🙂  Additionally, they are only a 1-day drive from your shop.   They even sell a lot of different blast media.

Thanks for letting all our members know about Trinco.

Posted

I haven't seen a negative comment about them anywhere. I have requested a quote for a Model 30 including shipping but I imagine it's going to end up around $2200. I could save about $500 and go with TP Tools Scat Blast which also seem pretty good but there smallest cabinet is 34". I'm a buy once guy.

Posted
23 minutes ago, NATURE said:

I'm a buy once guy.

They both look like excellent choices.  At this point, I would say, "Pick your poison."  I'm still leaning towards the Trinco blast cabinet because that's all they make and sell.  And, as a bonus, they sell the blast media as well.  Don't forget to order a few bags with your machine because it will more than likely save you money on the freight.

Posted

My cabinets were 48X60 pressure cabinets. One shot plastic media and walnut shell, the other shot flower size glass bead. Trick to having a cabinet for any kind of production is air pressure volumn, not the high pressure. I had a 800cfm compressor that ran the shop booths and the two cabinets. So all four guys could be working a the same time. A pressure cabinet will out produce a siphon cabinet about 4 to one in time on a job. But for a small use system, a siphon using higher pressure and a course media will work fine. The dust collectors are OK and normally will collect all the air born dust, where a pressure production system will really capture all the dust, but the costs really go up. Find a good used pressure cabinet and have a blast...

  • Solution
Posted

I would have preferred a pressure system but I'm not willing to upgrade my compressor to have one. Right now my 24 CFM at 175 PSI is fine for a syphon system. I'll be ordering the Trinco Model 30 today and I'm sure it will be great for what I'll be using it for. I'll purchase a separate reclaimer to keep the dust down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      The Technician Shortage Is Our Fault, And It's Time We Own It
      Nearly every day, I hear shop owners complain: "There's a technician shortage. We can't find qualified people. There's no one out there." If that's true, then who's to blame?
      The industry? The schools? The government? I don't know how you feel, but who promised us an endless supply of qualified technicians?
      Another common complaint is that young people do not want to work in the trades. Well, if that were true, then why are other trades such as HVAC, electrical, and plumbing growing? What are they doing that the automotive industry is not? 
      Here's the reality we need to face: We do have a problem, but we shouldn't look for someone or any entity to rescue us. Not the government. Not the trade schools. Not the recruiting companies. No one owes us a workforce. If we want great people in our industry, it's up to us. At some point, we need to own up to the truth: Building a pipeline of qualified technicians is our responsibility.
      In this blog article, I will break down the key reasons we are in this situation today and what we, as an industry, can do to solve the technician shortage. Are you ready to look in the mirror?
      Have We Pushed Technicians Away?
      Let's take a look at flat-rate pay. True flat rate, which pays a technician only for the hours they produce, is a controversial pay plan that emphasizes high production levels and creates a competitive work environment that, if not properly controlled, can lead to increased mistakes and a decline in morale and team spirit. Additionally, the stress and physical demands placed on technicians as they age are not favorable to long-term employee retention. What do we do with technicians as they grow older into their fifties and begin to slow down? 
      I have heard all the arguments and pros and cons of flat-rate pay, and I am not going to judge any pay plan. Let the facts speak for themselves. True flat rate has changed in most areas around the country and has evolved into a pay plan that gives technicians some pay guarantee.
      Many shop owners have learned that team morale, along with the opportunity to earn income, is important to technicians and to the company's long-term success. But let me ask you: how many technicians have left or been pushed out over the years because of the old flat-rate pay system?
      Another issue is the workplace environment. I remember being grateful to be hired as a young technician at a local repair shop. While very thankful, the work environment was not ideal. The shop owner kept the bay doors open year-round (I am from New York) unless it rained or snowed. He felt that if the bay doors were closed, customers might think we were closed for business. We had no heat and no hot water. Many of the jobs were done outside, year-round,  in all types of weather. The starting pay was minimum wage, with no benefits, sick days, or vacation pay. 
      Now, again, I need to point out that I was truly grateful for the opportunity this shop owner gave me. I learned a lot working there, and the experience was pivotal in my career. But looking back, I wonder how many people were discouraged by these working conditions?
      While the physical demands of the repair workplace are daunting, perhaps even more critical is the culture. Too many of my generation shop owners preached the mindset of "my way or the highway." We were the business owners, after all. We started our companies, took all the risks, and provided jobs. Why shouldn't we be the ones to set the ground rules our way?   
      Many of us found over the years that the "my way or the highway" mentality was a sure way to isolate employees and make them more likely to look over the fence for greener grass. In other words, it led many technicians to seek employment elsewhere, where they felt they could be appreciated and recognized for their hard work. The issue, however, was that there wasn't much green grass around. Disappointment after disappointment, bouncing from repair to repair shop, eventually led to despair. So, I ask you: were workplace conditions a contributing factor in today's technician shortage?
      Another factor that we are all well aware of is the complexity of the modern automobile. When I started, the work was mostly physical, and you were required to master essentially three vehicle models: General Motors, Ford, and Chrysler. Let's fast-forward to today. The evolution of automotive technology, along with the extensive training and tools required, has outpaced the typical technician's pay compensation, with no clear career path. Again, leading to frustration and insecurity about the future.
      Here is the bottom line: people don't leave their job; they leave their experience. We must do a better job. 
      The News Isn't all Bad; Your Next Steps to Fix the Technician Shortage
      To fix the technician shortage, it will take a combined effort from everyone in the automotive industry, particularly automotive shop owners. Shop owners are in the perfect position to make the greatest impact, not only on their businesses but also on the future automotive workforce.
      First, shop owners must become better leaders and understand that their ultimate success is directly dependent on the people they assemble around them. Any shop owner who mistakenly believes they can build an empire solely on their abilities is destined for serious disappointment. Business owners who think like this will eventually plateau. Without the collective contributions from a team of qualified people, your business will stall; it will not continue to grow.
      Create a workplace that attracts top talent: a clean, professional, well-equipped facility designed to support productivity, teamwork, and a career, not just a job. Build a great reputation in your community by getting involved locally. Become the auto repair shop that people take notice of as "the" place to work.
      Next, shop owners must become more financially knowledgeable. Knowing your numbers and what you need to achieve for a strong bottom-line profit is essential to paying technicians the money they need and deserve. Profit will also allow you to compete with other trade industries by providing a benefits package that has real take-home value and security.
      When it comes to culture, this is where the rubber hits the road. People crave recognition, praise, and a sense of purpose. Despite what you hear, people are not just money-motivated. Once people feel secure in their financial situation, retaining and motivating technicians can only be achieved by connecting with them on an emotional level. You cannot show enough appreciation. Give out praise for a job well done as if your business depended on it, because it does.
      As technicians age, we need to have a place for them. Expecting a 58-year-old to perform like a 35-year-old is unrealistic. We need to be more focused on career pathing. Provide training, skill development, and coaching to develop leaders and mentors within our older workforce. While their bodies may have slowed, the knowledge they have gained is priceless. 
      Our future is dependent on young people entering our industry. We need to give more young people opportunities. Every shop owner across the country should consider hiring an apprentice, then build an apprentice training plan and career path for them. If every shop did this, we could solve the technician shortage within five years. Get involved with the trade schools and high schools in your area. Look into the NAPA Apprenticeship Program. Don't sit on your hands with this one. Do it today.
      Lastly, don't get left behind. Commit to ongoing training for all your employees. Keep up to date with tools and equipment tailored to your business model. Don't try to be all things to all people and all vehicles. Identify your core profile customer and the vehicles they drive, and become an expert on those vehicles and the services you offer.
  • Similar Topics

    • By Riccardo

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By DavisL
      Hey all, Davis here, new to the forum. I built evqualified.com, a free directory that helps EV owners find shops based on verified credentials (ASE certs, EV training, high-voltage safety) instead of reviews or paid ads.
      EV ownership is growing fast and most owners have no idea where to take their car. They don't trust Google reviews to tell them who's actually qualified to work on a 400-800V system. That's the gap this fills.
      If your shop does any EV or hybrid work, even basic stuff like 12V batteries, brake service, tire rotation. You qualify for a listing. Takes 2 minutes to check if you're already on there or submit your shop. Here's the link https://www.evqualified.com/for-shops
       
      Curious to hear from anyone doing EV work:
      Are you seeing more EV customers coming in?
      What's the biggest challenge with adding EV service to your shop?
      Would a credential-based directory actually help you get more EV business?

      No cost, no catch. Just trying to build something useful for the industry. Again, here's the link to get added to the site https://www.evqualified.com/for-shops.
      Thanks!
       
    • By nptrb

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Alex1987
      Is there any recommendations of call centers that can actually handle my service bookings?
      I have been struggling with overflow since I started.
      Maybe I am selling too cheap.
      Friend of me told that AI can nowdays answer but not seen any using these yet. Is that possibility? Googled Vapi today but not really sure yet.
       

    • By Drivi
      Hey everyone,
      I'm building a tool that helps auto repair shops plan preventive maintenance automatically — it predicts when each customer should come back, sends reminders, and helps keep the shop busy year-round.
      But before I go any further, I’d rather hear it from real shop owners:
      How many hours or bays do you usually have sitting empty every month?
      What percentage of your work is planned maintenance vs emergency jobs?
      Do you use any system right now to remind customers about service? How well does it work?
      What would make you not trust an AI system that claims to schedule customers automatically?
      I’m not here to pitch vaporware — I want to understand how shops actually think about preventive work and downtime.
      If a few of you are curious, I can share a short demo and would love your honest feedback.
      Thanks for sharing your experience — it’s worth way more than any market research report.


  • Our Sponsors

×
×
  • Create New...