Quantcast
Jump to content


Gonzo

Article: Got Talent? training, dedication, and more... to really shine, you got to have talent.

Recommended Posts

Got Talent?

There’s something to be said about having the skills needed to be a modern day mechanic. A true mechanic and not some guy just turning wrenches in a bone yard or playing around in his home garage. The skill of a talented mechanic is something that is accumulated over years of bending over a hood, but it also can be taught by a skilled teacher at a tech school, too. However, all the years of experience and all the training in the world can make you a pretty good mechanic, but you need one other thing, and that’s talent.

Red Skelton once said to his young protégé, “Talent is something you’re born with. Even if you are standing behind a brick wall, your talent will come through.” That protégé was none other than Johnny Carson, the King of late night television for 30 years. The same thing applies to the art of being a proficient, modern mechanic. Just like in any other field you can go into, you have to be able to take the knowledge you’ve inhaled from school or OJT and be able to apply it to the work you’re doing.

Some very talented people work in this field, and it’s not hard to tell who they are. Repair shops all over the country are looking for mechanics, and there seems to be a never ending shortage of them, but what those employers are really looking for is talent. Talent, isn’t necessarily something that can be taught, it’s something that comes natural. You can gain the talent if you don’t already have it, but it may take quite some time to develop those skills. Advanced classes help, OJT helps, and a whole lot of afterhours dedication doesn’t hurt either. As the old saying goes, “A good mechanic is never out of work.” Very true, however that old saying should actually be stated as, “A talented mechanic is never out of work.”

Everyone has some sort of talent, some sort of skill that separates them from the pack. For some, it’s an odd ball skill that gets them “15 minutes” of fame on the local news, while others have something they can turn into a career. Singing, for example has always been considered a “talent”, that’s a fair assessment of a trained singer’s abilities. But I think singing is more of a gift and ability combined.

 

Most people who can carry a tune are either born with it or find out in later life they have the talent for it. I’m not sure I’ve ever heard of somebody suddenly developing that perfect soprano voice by accident. Even though I can’t sing a note, I still blare out my favorite song in the shower, but I know I don’t have the talent for it. If you’ve got what it takes to become a singer and you’re going to go to a prestigious school to develop those skills, chances are you’ve already got the singing voice. It’s not like you’re going to “learn” how to begin to sing when you’re there, you already can. The school just brings out the qualities of your talent. As for me, it would be a waste of time, it’s not my talent.

For the mechanic, there’s no doubt a natural ability is something a lot of talented mechanics carry with them, and their abilities are only enhanced with continual schooling. But, there are a lot of guys and gals who love cars and things mechanical and want to work in the field as a mechanic, but lack the ability to actually perform the job. This is so evident with a lot of weekend wrenchers who attempt to repair their own cars at home. It could be from a lack of a few basic skills, or a lack of mechanical abilities… or it could be they don’t have the talent for it either.

 

I hear it all the time from people who come into the shop to have their car repaired after they’ve spent countless hours swapping parts and pondering over a repair manual. They all say the same thing, “I do all of my own work.” Well, I seriously doubt they could actually do “all” their own work. More likely they’ve managed to change a few spark plugs or something. I’ve been at this trade for several decades and I can assure you I can’t do it all, and I don’t see how some weekend nut spinner with zero training in today’s cars could possibly be able to do it all either.

 

Sure, if you are one of those people who have two left feet, I’m sure in time you could learn to dance, and if you’re one of those people who can’t remember, “Righty tighty – lefty loosey” you can acquire the needed skills to become a top notch mechanic, too. But, there’s something to be said when a person finds the trade or skill they have their own natural ability in and their talent shines through. Ask most any tech college teacher and they’ll tell you the same thing, “Not all the students in here will make it to graduation.” Nothing to be ashamed of, it’s just that “talent” part of it is exposed in the early stages of becoming a full-fledged mechanic. You either got it, or ya gotta learn it, or you may never get it. Then again, it might a good thing you found out early that this trade isn’t cut out for you, and looking into a different career might be your best options.

 

Even though this trade still has a lot of heavy lifting, lots of grease and grime, and way too many scrapes and bruises to count it’s also one that the fair sex is taking notice. There’s some real talent in a lot of the gals I know in the trade. I find it rather amusing that nearly all the gals I personally know who are mechanics don’t have a problem asking for help when they get stuck on a problem or need a bit of extra muscle. But, the guys, well… I guess there’s a bit of that machoism about it that makes a few of them a little less likely to ask for help. I’m positive that in the future even more women will be in the trade, and I think that’s a step in the right direction to bring more respect to this trade as well.

 

If you’ve been in the trade for some time, male or female I’m sure you can spot a talented mechanic when you’ve talked to them for a bit, and I’m sure you can also spot some socket jockey trying to impress you with their past conquests rather than actual talent. I know I can. I always refer back to the old saying, “It don’t take me long to look at a horseshoe.”

 

It is a trade that needs more talented people in it. The cars are getting more and more complicated, and merely changing a couple of parts doesn’t make you a mechanic any more than me a singer because I sing a cappella style in the shower. The question is… got talent?

 

Click here to view the article

  • Like 2

Share this post


Link to post
Share on other sites



  • Similar Forum Topics

    • General Liability / Garage Keepers Insurance Quotes... What do you pay?

      I have a 2 bay facility that I rent and one employee plus myself. I was quoted about $2346 per year for both general liability and garage keepers from Liberty Mutual(using CoverWallet as the broker). - General liability was $1,032 per year if paid in full for $1,000,000 limit and $2,000,000 aggregate - Garage keepers was $1320 per year if paid in full for $75,000 coverage Does this sound right? I am in the process of getting other quotes but wanted to see if I am in the right ballpark. This is my first time getting insurance for the business and it seems like some places don't want to insure you unless you have history. Shop size: Employees: Location: Own or rent: Coverage: Insurer:   Thank you

      By [email protected], in Auto Repair Shop Management Help? Post Here!

      • 1 reply
      • 216 views
    • Article: Restoration for the Mechanic - modern repairs, old mechanic

      Restoration for the Mechanic Electrical issues on today’s cars have certainly taken  center stage.  Mechanical issues are still there too, but  it’s not uncommon to have a mechanical problem be  diagnosed, monitored, or calibrated by some electronic  means.  You just can’t get away from the electrical  if you’re in the automotive repair business these days.   It’s taken over just about every facet of the automobile.         Today’s mechanics have become something entirely  different from the stereotypical mechanic from just a  few decades ago.  It’s not that long ago when the  electrical section of the repair manuals were just a  chapter or two, today… its volumes and volumes of  schematics and diagnostic procedures.  I’m old enough  to remember when points and condensers were still  the norm, and I’ve watched the industry go from  electronic ignition to today’s electronic jungle of wires  and processors. We’ve definitely come a long way with  the technology.   Even though I work on all these newfangled electrical wizardry systems on the modern car, deep down I’m still the kid who got a kick out of tearing down an old junker and putting it back together.  Now, I’m surrounded by modules, proximity keys, and sensors.  Occasionally it’s kind of nice just to step away from the computer and just turn a wrench or two. I look forward to those simpler kinds of jobs, the ones that need a craftsman’s touch and not a box of transistors and capacitors to figure out what to do.  Back to a time when a driver was more mechanical involved in the process of operating the vehicle.   Heating vents with levers and cables, or a hand choke that needed just the right touch to get it started.  No electronics, no service light, just the essentials.  (For you younger techs, I’m referring to the days when you actually had to unlock a door with a key.)     I still marvel at the ingenuity and engineering of those times. I guess it’s one of the reasons why I like going to old car and steam engine shows so much.  It’s all about the mechanics for me.  Electronics are great, but to see the early mechanical devices that were commonplace a century ago still amazes me.  How they figured it out, and how they made it work is shear brilliance.  (If you ever get a chance to study some of those early mechanical systems, you might be surprised how things were accomplished prior to the computer age. It’s quite fascinating… well at least to me it is.)      It’s great to be able to step back once in a while and just be a mechanic.  Back when things were rebuilt and not just replaced with new. There’s a certain satisfaction in taking a broken mechanical device and making it functional again.  It’s those jobs that after you’ve wrestled the components into place, and everything is finished you realize that you’re covered in grease, but for some reason you’ve got this big smile on your face. It’s the look of accomplishment, a smile of pride in a job well done.  And while you’re cleaning up the tools, you look over at the finished project still smiling, knowing you’re done and can move onto the next project.  It just doesn’t compare to finishing up on a modern car when the last thing to do is watch that blue line steadily move across the computer screen, waiting for it to say “Task completed”.   Not that I’m putting down the modern car, no far from it.  It’s just nice to take a break once in a while from the technical mumbo-jumbo and just be a mechanic for a change.  Even though it’s pretty awesome to solve a difficult electrical issue, it’s hard to beat a good old fashion mechanical repair.  For me, when a restoration project shows up at the shop I get a chance to turn off the laptop and open the toolbox.   These restoration jobs are just as much for the customer as they are for me.  It’s a restoration of some of my old almost forgotten mechanical abilities. (Yea, I still got it…)     We put a lot of trust in the modern electronics, something the engineers and designers of those automobiles from a few decades ago never even though of.  Their own ingenuity and craftsmanship kept them going.  Components were built to be repaired not replaced.  I think it’s safe to say that a car from 50 years ago is more likely to start and run in another 50 years but I seriously doubt a car from today would have the same luck. There again, it might be something a technician/mechanic of that era might figure out how to do by then.  Me I’ll still stick with being a mechanic/technician … I still like the physical repair aspect of the job.     The future of electronics in today’s cars is constantly changing; sometimes we notice the changes while other times you can’t physically see them.  Sometimes all it takes is a little R&R on an old jalopy just to make me remember how far we’ve come.  In the meantime, the latest restoration job is done so it’s time to go for a test drive.    I’ll get back to the laptop and the modern car world just as soon as I get all the tools cleaned up… it might take a bit though … I’m still admiring the restoration job and I’ve got some more smilin’ to do.  
      View full article

      By Gonzo, in AutoShopOwner Articles

      • 2 replies
      • 95 views
    • In-House Training is needed too, sometimes more

      We know the value of technical and sales training, but what about in-house training.  What I am referring to is review policies and procedures.  By reviewing in house written procedures gets everyone on the same page, improves production and also improves quality in the repair process. A simple process such as everyone following the same procedure for a cooling system problem will add to the overall shop's production and in the long run procedure a better quality job.     

      By Joe Marconi, in Joe’s Business Tips For Shop Owners

      • 0 replies
      • 160 views
    • New Employees Needed

      I need to find some employees fast and I am having no luck, anyone willing to help me write an advertisement or help me with postings, over the phone or through e-mail, please let me know. Just found this, not feeling good about this. https://www.indeed.com/forum/job/automotive-technician/can-t-do-it-anymore/t459836

      By Hands On, in Auto Repair Shop Management Help? Post Here!

        
      • 9 replies
      • 943 views
    • Article: The Ghost Mechanic - those mechanics that seem to leave evidence of their bad work that you find... or was it a mechanic after all?

      The Ghost Mechanic          Creepier things have happened, but rarely do things go without an explanation.  This time around it’s the mystery mechanic who seems to have been working on this guy’s car, or maybe not.  Maybe it’s that ghostly mechanic who haunts people’s cars on quiet neighborhood streets in the middle of the night. You know, that guy who leaves nothing but telltale greasy finger prints or unattached wire harnesses, or even loose bolts where loose bolts shouldn’t be. This job was no exception to the antics of the invisible mechanic’s handy work. It’s a mystery worth solving.          A Chevy HHR was towed in for a no start condition.  It wasn’t exactly a no start; it was more like a poor starting/running condition. When it would run, the poor thing sounded like it was on its last trip to the garage and its first trip to the salvage yard.  Trying to beat it to its last ride on the tow truck, I hooked up the scanner to see what inner mysteries were present.  Code P1682 (Ignition 1 switch circuit 2), but I wasn’t done yet. Time to do a complete health check on all the modules.  Sure enough, the ‘U’ codes were off the charts.  Seems we have a lot of low voltage codes causing a problem.           A quick check of the wiring diagram showed the power led to a voltage input lead for the PCM, TCM, and several other circuits that would definitely lead to a rough, hard to start, non-cooperating HHR. This may turn out to be a simple problem after all.  Could be wiring, a component, or perhaps a fuse box problem.  A quick glance at the fuse box didn’t reveal much, but I should probably take a closer look at that fuse box.  Maybe go as far as physically checking the actual fuse circuit.  Hmm, something is amiss here. The fuse is good, but the fuse is in the wrong slot. The slot that it’s in should be an empty slot. Seems somebody was fooling around under the hood and didn’t put the fuse back correctly.             Might as well try moving the fuse back to the proper location.  Well, imagine that, this old HHR starts right up!  OK, it’s not running the best . . . yet.  Do a little throttle relearn and it runs as good as new.          After rechecking the related circuits for any damage, or out of place items I gave the HHR the once around the block test.  Runs great, sounds great, no warning lights, no unusual noises, seems fine to me.  I guess I’ll write up an invoice on this job and call the customer.  As I closed the hood, the telltale greasy hand prints from the last guy who was under the hood were everywhere.  I think I spent as much time cleaning this guy’s hood as I spent diagnosing the problem. I gave him a call and explained to him, as best I could, what I had found. Although, I did have that one nagging question regarding who had worked on the car previously. I really wanted an answer to that question.   "NOBODY" … are you serious?  That’s when I explained the entire repair all over again.  Between the greasy finger marks on the hood and fenders, and the fuse in the wrong place, I’m afraid I’m not going to buy the story that the mysterious ghost mechanic has struck again. His only explanation came down to the whole thing must have been a poltergeist or something. Or ‘someone’ not ‘something’ is a better way to put it.  I’m not buying the ghost mechanic theory. At this point, he seemed to be more intent on finding out the final bill, and not so much on solving the mystery of how the fuse mysteriously moved into a different slot. But, before I gave him the total, I recommended he perform an exorcism on his car, since ‘NOBODY’ has been touching it.  His response, "How much more will that cost me?” Seriously? Now, I’ve been asked to do all sorts of things to a car, like put a helicopter landing pad on the roof, remove a varmint from behind the dash, or turn a Prius into a tow truck, but I don’t think I’ve ever been explicitly asked to do an exorcism on the family truckster.  Actually, I’m starting to put this whole thing together.  The mystery mechanic is none other than this guy himself.  His answers to certain questions, and how he told his story were a dead giveaway as to who the ghost mechanic was. I swear some people just can’t be honest and admit when they’re beyond their learning curve.  We both might have had a good laugh over the whole thing, but instead this guy wants me to drop the price in half, since it was such an ‘easy’ repair and all, and ignore the whereabouts of this seemingly ghostly apparition with the mindless ability to screw up the family car. But, since this guy wouldn’t own up to it, even with the evidence of his very own greasy paw prints, he’s in for a lesson of honesty, awareness of his own abilities, and how to pay for a professional diagnosis. It’s just another case of the mechanic solving the mystery of the proverbial ghost mechanic.  Debunking wives’A tales about the modern automobile, supernatural occurrences under the hood, and apparitions that seem to move fuses around is just another duty of the modern mechanic. Oh, and don’t think you’re the first person who’s tried the ghost mechanic as your method of passing the blame… you’re not.  Every good mechanic has performed their fair share of exorcisms in the past and have seen the results of the mystery mechanic and his endeavors.  We know who you really are.
      View full article

      By Gonzo, in AutoShopOwner Articles

      • 2 replies
      • 302 views
  • AutoShopOwner Sponsors



×