Quantcast
Jump to content


  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By OTPAuto
      I'm trying to hire, and literally cannot find anybody. Ideally I'm looking for a full time parts hanger. Somebody that has little or no diag experience or isn't comfortable with electrical work, but can do the basics on their own. Where do I even try to look?  I've tried CL and Facebook to no avail. I've called both of the local community colleges with automotive programs, and it's just crickets. I don't even want to pay them flat rate, I'll more than happily pay them hourly. 
       
      And PLEASE, for the love of god, I don't want to hear the lecture on 'you need to hire nothing but master techs'. That doesn't help me, nor fix my current problems. I know what I need. I just need help trying to figure out how to find it. Nobody becomes a mastertech without doing basics first anyways.
    • By Gonzo
      The Ghost Mechanic
               Creepier things have happened, but rarely do things go without an explanation.  This time around it’s the mystery mechanic who seems to have been working on this guy’s car, or maybe not.  Maybe it’s that ghostly mechanic who haunts people’s cars on quiet neighborhood streets in the middle of the night. You know, that guy who leaves nothing but telltale greasy finger prints or unattached wire harnesses, or even loose bolts where loose bolts shouldn’t be. This job was no exception to the antics of the invisible mechanic’s handy work. It’s a mystery worth solving.
               A Chevy HHR was towed in for a no start condition.  It wasn’t exactly a no start; it was more like a poor starting/running condition. When it would run, the poor thing sounded like it was on its last trip to the garage and its first trip to the salvage yard.  Trying to beat it to its last ride on the tow truck, I hooked up the scanner to see what inner mysteries were present.  Code P1682 (Ignition 1 switch circuit 2), but I wasn’t done yet. Time to do a complete health check on all the modules.  Sure enough, the ‘U’ codes were off the charts.  Seems we have a lot of low voltage codes causing a problem. 
               A quick check of the wiring diagram showed the power led to a voltage input lead for the PCM, TCM, and several other circuits that would definitely lead to a rough, hard to start, non-cooperating HHR. This may turn out to be a simple problem after all.  Could be wiring, a component, or perhaps a fuse box problem.  A quick glance at the fuse box didn’t reveal much, but I should probably take a closer look at that fuse box.  Maybe go as far as physically checking the actual fuse circuit.  Hmm, something is amiss here. The fuse is good, but the fuse is in the wrong slot. The slot that it’s in should be an empty slot. Seems somebody was fooling around under the hood and didn’t put the fuse back correctly.   
               Might as well try moving the fuse back to the proper location.  Well, imagine that, this old HHR starts right up!  OK, it’s not running the best . . . yet.  Do a little throttle relearn and it runs as good as new.
               After rechecking the related circuits for any damage, or out of place items I gave the HHR the once around the block test.  Runs great, sounds great, no warning lights, no unusual noises, seems fine to me.  I guess I’ll write up an invoice on this job and call the customer.  As I closed the hood, the telltale greasy hand prints from the last guy who was under the hood were everywhere.  I think I spent as much time cleaning this guy’s hood as I spent diagnosing the problem.
      I gave him a call and explained to him, as best I could, what I had found. Although, I did have that one nagging question regarding who had worked on the car previously. I really wanted an answer to that question.  
      "NOBODY" … are you serious?  That’s when I explained the entire repair all over again.  Between the greasy finger marks on the hood and fenders, and the fuse in the wrong place, I’m afraid I’m not going to buy the story that the mysterious ghost mechanic has struck again. His only explanation came down to the whole thing must have been a poltergeist or something. Or ‘someone’ not ‘something’ is a better way to put it.  I’m not buying the ghost mechanic theory. At this point, he seemed to be more intent on finding out the final bill, and not so much on solving the mystery of how the fuse mysteriously moved into a different slot.
      But, before I gave him the total, I recommended he perform an exorcism on his car, since ‘NOBODY’ has been touching it.  His response, "How much more will that cost me?” Seriously? Now, I’ve been asked to do all sorts of things to a car, like put a helicopter landing pad on the roof, remove a varmint from behind the dash, or turn a Prius into a tow truck, but I don’t think I’ve ever been explicitly asked to do an exorcism on the family truckster.  Actually, I’m starting to put this whole thing together. 
      The mystery mechanic is none other than this guy himself.  His answers to certain questions, and how he told his story were a dead giveaway as to who the ghost mechanic was. I swear some people just can’t be honest and admit when they’re beyond their learning curve.  We both might have had a good laugh over the whole thing, but instead this guy wants me to drop the price in half, since it was such an ‘easy’ repair and all, and ignore the whereabouts of this seemingly ghostly apparition with the mindless ability to screw up the family car. But, since this guy wouldn’t own up to it, even with the evidence of his very own greasy paw prints, he’s in for a lesson of honesty, awareness of his own abilities, and how to pay for a professional diagnosis.
      It’s just another case of the mechanic solving the mystery of the proverbial ghost mechanic.  Debunking wives’A tales about the modern automobile, supernatural occurrences under the hood, and apparitions that seem to move fuses around is just another duty of the modern mechanic. Oh, and don’t think you’re the first person who’s tried the ghost mechanic as your method of passing the blame… you’re not.  Every good mechanic has performed their fair share of exorcisms in the past and have seen the results of the mystery mechanic and his endeavors.  We know who you really are.

      View full article
    • By Alex
      Free webinar for all members hosted by @Ron Ipach from Captain Car Count! 
      As you already know, finding good, qualified technicians isn’t as easy as it was in years past. Gone are the days of simply placing a few ads online or in the newspaper help-wanted section. 
      When you combine the fact that more shops than ever are in the hunt for qualified applicants, with the ever-shrinking pool of technicians to draw from, it’s no wonder so many shop owners are frustrated with their search. 
      Attracting good technicians today requires a radically different approach, and on this highly informative online training event, Ron Ipach, president of Repair Shop Coach, will walk you through the same strategies that his clients are using to attract lots of highly qualified to their shops on a consistent basis.
      CLICK HERE TO REGISTER
      Time slots vary and are held weekly:
      Please reach out to @Ron Ipach for additional information.
    • By Elite Worldwide Inc.
      By Bob Cooper
      If there is one thing our industry has done since the very beginning, it’s put technicians into the role of service advisors. The rationale is that they have a good understanding of automobiles, which will enable them to be competent advisors. Unfortunately, that’s the furthest from the truth. Although an in-depth understanding of automobiles can be an asset, there are a number of other things you should consider before offering a service advisor position to one of your techs.
      First and foremost, you need to consider why they want the position, or why you are offering it to them. If they suggested they would like to become an advisor because it has become difficult to work on cars at their age, then they may very well be the wrong person, because they are looking to become an advisor out of necessity rather than interest. The same is true if you are looking to move a tech into an advisor position when that tech has shown little interest in becoming an advisor in the past. Two of the most common mistakes we see at Elite are shop owners making this hiring decision out of necessity rather than interest, or out of desperation rather than inspiration. In either case, there is a high probability of failure.
      Another major mistake we see made by shop owners is they put far too much value on the technician’s technical skills, and far too little value on the tech’s natural people talents, and their passion for the position. Unfortunately, these owners don’t understand just how important the people skills component is to an advisor’s success. So here is what I am going to encourage you to consider before you offer one of your technicians a service advisor position. 
      First of all, when it comes to selling auto repairs and services, bear in mind that natural talent trumps technical skills every time. Talent can’t be taught, but skills can, so if your tech doesn’t naturally smile, doesn’t have a positive attitude, or is not quick-witted and articulate, then they may do a fair job for you, but they will never be the advisor that keeps you ahead of your competitors. You will find there are a number of companies that offer online behavioral assessment testing to evaluate the sales potential of candidates, and I would strongly encourage you to take advantage of this type of testing. You will more than likely be surprised with what you discover. 
      Secondly, you will need to evaluate how well he or she will be accepted in the advisor role by your other employees. If the candidate has a good relationship with your other employees, and if you feel your employees will be willing to take directions and orders from the candidate, then they may very well be a good fit for an advisor position. 
      The third thing you will need to do is avoid overselling the position to the candidate. In addition to knowing the benefits of the position, they’ll need to know all of the negatives as well. In essence, you want to make sure that there are no surprises. We also encourage all of our clients to get the significant other of the candidate involved in the decision making process. As we say at Elite, “When you hire Larry, you get Mary”, so you will need to ensure that their spouse is also onboard with the new position. 
      Lastly, I hope you do two other important things if you decide to have one of your technicians take on the role of service advisor. First of all, take them for a test drive by having them help you on the counter, and pay close attention to their people skills, how well they are able to manage their emotions, and how they deal with difficult situations. Secondly, if and when you put that tech on the service counter, remember, training trumps productivity. What that tech will need more than anything is professional sales training, encouragement from you, and the opportunity to become… a superstar. 
      Since 1990, Bob Cooper has been the president of Elite, a company that strives to help shop owners reach their goals and live happier lives, while elevating the industry at the same time. The company offers coaching and training from the industry’s top shop owners, service advisor training, peer groups, along with online and in-class sales, marketing and shop management courses. You can learn more about Elite by visiting www.EliteWorldwide.com, or calling 800-204-3548.

      View full article
    • By 3PuttFever
      On going battle between my Manager and Tech staff. They like to look up about everything online before doing the work. When a RO says 'Specialty Tool' they think they need the tool to complete the work. For example, a recent 2009 Lincoln MKX had a RF axle seal leak. Pretty common problem. Tech doesn't want to do it without the tool kit. Took kit would cost more than the job. 
      We all have seen mechanics who can fix and think their way around an obstacle. I've got a shop full of parts hangers. Perhaps the Lincoln is better suited for a drive line shop or dealer but I figure we can figure it out and get it done like we've usually done. I've had Techs make their own tools and solutions and lately the younger guys just give up if they don't have YouTube instructions and specialty tools. 
      Thoughts? 
  • AutoShopOwner Sponsors



×