Quantcast
Jump to content
    • You can post now and register later. Already registered? sign in now to post with your account.
    • ×   Pasted as rich text.   Paste as plain text instead

        Only 75 emoji are allowed.

      ×   Your link has been automatically embedded.   Display as a link instead

      ×   Your previous content has been restored.   Clear editor

      ×   You cannot paste images directly. Upload or insert images from URL.


      Once you submit your question, a new topic will be created for you in our forums. Our moderators may move your topic to a more suitable forum category if one exists. Members will see your topic and be able to respond to your question.

    • This will not be shown to other users.
Gonzo

Article: It's Alive! It's Alive! - - Dr. Frankenstein vs a mechanic -- same but different

Recommended Posts

It’s Alive! It’s Alive!

Dr. Frankenstein waited for just the right thunderstorm to attach the clamps to his creation. As Igor threw each dead man switch into action a shower of sparks flew from the control panel. You could see the high voltage coursing through the Frankenstein creature as the lightning changed the shadowy glow of the laboratory. His pieced together monster began to thrive and move about. Then, with its arms stretched out straight, and its large hands dangling, it rose from the table and walked across the room. Dr. Frankenstein shouted out, “It’s Alive! It’s Alive!”

 

For a mechanic, bringing a car back to life may not be as spine tingling or as thrilling as an edge of your seat horror flick, but there are a few times when a few sparks might fly and some smoke might come rolling out from under the hood. In a way it could be compared to a horror scene sometimes, and it probably will make the hair stand up on the back of the boss’ neck, but it’s not Hollywood material. Although, it can make for a rather entertaining afternoon at the shop.

 

I guess in some peculiar way a mechanics job is somewhat like being Dr. Frankenstein. Let’s face it, on a daily basis a mechanic brings the dead back to life. We wander through the dead silence of creepy bone yards for body parts and other needed essentials from discarded creatures of the road. If need be, we’ll work late into the night like a mad scientist ripping the parts out of the donor with hammers, saws, and other tools. Then, like a fine surgeon, we’ll carefully stitch the replacement parts into our latest creation. After all the pieces are in place we’ll fill the different cavities with their proper bodily fluids, and then zap some electricity through its veins.

 

Even after all these years I still act a little like Dr. Frankenstein when the first signs of life emerge from the latest resurrection. Although, I’ve never used a lighting storm to bring a car back from the dead, a few extra jolts from the battery charger doesn’t hurt one bit.

Just like Dr. Frankenstein, a mechanic usually works in his laboratory (service bay) in solitude. Sometimes with a helper or an apprentice whose main tasks are collecting those various parts, throw switches, turning dials, holding body parts in place, and observing (and learning) what’s going on, while peering over the mechanic’s shoulder. All this, while using advanced technical, mechanical, and electrical processes that are only vaguely understood by the general mass of commoners out on the city streets. In the service bay (laboratory), mechanics and their helpers take those seemingly impossible arrangements of various materials and create a beast with unbelievable strength and power, and in some instances, their own version of a Frankenstein monster.

 

In the movie, those town folks said Dr. Frankenstein had to be crazy for thinking he could put this monster together, and even crazier to think he could bring it back to life. But, I’m sure there are quite a few common city dwellers out there who would think the same thing about a mechanic, if they ever saw all the bits and pieces strung out on the service bay floor that needed to be removed to change out a heater core on some cars.

 

Old Doc. Frankenstein could have used a few lessons in customer service, though. The last thing you want to see is an angry mob heading to your castle (or shop) because your latest creation has terrorized the town, or left somebody’s daughter stranded on the side of the road on a dark and gloomy night. I don’t think I would have fared any better than Dr. Frankenstein did when the townspeople came a calling with pitch forks, snarly faces, and flaming torches. Then again, I’m no Dr. Frankenstein. I’m not creating a one-time monster out of used parts. I have to bring these demons of the road back to life every day, and unlike the doctor… I’ve got more than just two different models to deal with!

 

Not to say old Doc Frankenstein didn’t have a few various attempts of improving on his stitched together creation along the way, you know, “Bride of Frankenstein”, “Frankenstein meets the Mummy”, and so on… but, none of them worked out any better than his first try. Ya can’t have that kind of success rate in the automotive trade though. Whether it’s a mummy or a daddy’s car the mechanic’s job is to bring them back to life as quickly and as efficiently as possible. I suppose it’s a good thing Frankenstein was a doctor in a horror flick and not a mechanic. His track record wasn’t all that impressive.

Still in all, to take a piece of machinery that hasn’t been in use or unproductive for years and then bring it back to life is like seeing Frankenstein’s monster rise off of that operating table for me. There’s a certain testosterone appeal in seeing your latest creation go from a pile of miscellaneous parts to a machine that roars to life as you open its throttle. I don’t know of any mechanic who doesn’t get a little bit of that Dr. Frankenstein grin on their face as the fumes and vibrations fill the garage when their latest accomplishment comes to life.

I suppose there’s a touch of ol’ Dr. Frankenstein in everyone. For some of us, we’ve taken that horror movie idea of bringing things back to life (mechanical things that is) as part of our own occupation. Oh sure, there’s a lot of boring, mundane chores in the mechanic world that have to be performed on a daily basis. It’s not at all like in the movies, you know. There are oil changes, radiator flushes, and other boring, run of the mill repairs that need to be done.

 

But, when the chance comes along to bring a piece of machinery back to its gear grinding, throttle snarling, sparks flying former self, you can bet we’ll be there in the shop. It might even be one of those stormy nights just like in the movie. With the flickering glow of the lightning dancing across the garage wall, and the thunder claps echoing in the distance, we’ll hook up the cables, and bring that metal monster back from the dead. And, I’m sure, we’ll be saying the same thing ol’ Doc. Frankenstein said so well in those movies, “It’s Alive! It’s Alive!”

 

 

 

 

Click here to view the article

Share this post


Link to post
Share on other sites


We allow visitors to read the first post of each topic. To read this post, please login or register for a membership. 

  • Like 1

Share this post


Link to post
Share on other sites

We allow visitors to read the first post of each topic. To read this post, please login or register for a membership. 

  • Like 1

Share this post


Link to post
Share on other sites

  • Similar Topics

    • By Elite Worldwide Inc.
      Good morning,
       
      With business slowing down for most, we feel that there's never been a better time for shops to take advantage of online training. We know that everyone in our great industry is in this together, and want to help shop owners in any and every way that we can, so have decided to team up with Jasper Engines & Transmissions to make our Online High Impact Customer Care Sales Course available to the industry at no charge. 
       
      The recordings for this 4-part online sales training course are usually sold for $179, but the below link will provide you with complimentary access. You'll see that the page also provides access to an Action Plan that you can follow to help you navigate through the coronavirus pandemic.
       
      As you take on this challenge, please don't forget that you're not alone, and that this pandemic will pass. If there's anything else that Elite may be able to do to help you, please feel free to Contact Us, or give us a call at 800-204-3548.
       
      Click Here for complimentary access to our Online High Impact Course and COVID-19 Shop Owner Action Plan
       
      Wishing you the best,
       
      Your Friends at Elite
    • By Joe Marconi
      Not every shop pays flat rate; for many reasons.  So, many techs are on hourly pay.  There is nothing wrong with hourly pay, as long as you have an incentive program in place that promotes high production levels to avoid complacency.  For hourly paid employees I strongly urge you to have a pay plan that rewards production levels on a sliding scale.  
      As a business coach, I have seen too many times shops with low production levels and high tech payroll due to overtime pay. Overtime pay must not be used to get the jobs done with no regard to labor production.  Limit overtime and create a strategy that increases production and rewards techs with production bonuses.  By the way, there are many ways to incentivize techs, it's not all about money. 
      Overtime without high levels of production will eat into profits and if not controlled, with kill your business. 
      If your shop is an hourly paid shop, what incentives do you have in place to maintain production levels? 
    • By Elite Worldwide Inc.
      Elite's AMI accredited Online High Impact Course, sponsored by Jasper Engines & Transmissions, starts October 16th!
      This industry acclaimed online service advisor training course is delivered by 2019 Ratchet & Wrench All-Star Award winner Jen Monclus, and has been proven to generate both happier customers and higher sales.
      Here are a few of the topics that will be covered:
      - Selling multiple repairs & big ticket items
      - Selling diagnostic testing & maintenance
      - Building powerful relationships in 60 seconds
      - Overcoming the most challenging sales objections
      - Generating more repeat and referral business
      - Presenting service recommendations in a way that makes customers want to buy
      - Note: Course will come with a workbook, homework assignments and testing to ensure accountability and lasting results
      It's only $179 to enroll, and seating is limited, so call 800-204-3548 or visit our Online High Impact page to secure your advisor's spot today!
    • By Ron Ipach
      CLICK HERE TO JOIN THE SUCCESSFUL SHOP OWNERS FACEBOOK GROUP
      [transcription]
      Could Auto Repair Flat Rate Be Dead?
      TECHNICIAN shortage today is real. Last study that I saw said, for every eight shops that’s looking for a technician, there’s only one tech available so I know many of you watching this are experiencing that same thing. And I’ll also say one thing that I found: most technicians, when I mention flat rate, their cheeks kind of pucker up. They hate it. Why? There’s risk. They’ve been burned before. So often in the technicians starved market, what’s a shop owner left to do but put technicians on hourly or even maybe salary? And what that leads to is, really what I’m going to call an “uninspired performance.” Why? They get comfortable, they’re able to pay their bills without exerting a ton of effort.
      So what’s a shop owner to do? The answer I’ve uncovered recently in my shop is to have a Win Number. For every single employee. See one of the truths I discovered in my 30 plus years of being a shop owner is that often we don’t get the most out of our employees because we never really sat down and told them what we expect. I know that’s been one of my mistakes.
      So one of the things that I’ve done recently is I’ve given each employee a weekly Win Number, and that’s why it’s so important. For example, I recently sat down with each of my technicians and shared with them their Win Number. What do I mean by win number? What I expect out of them in parts and labor production for each employee. The numbers are based on my desired technician cost as a percentage of sales. It’s worked so well with my technicians that I now sent it out and established that win number with both my CSR and my service advisor.
      I’ve got to tell you the results have been incredible. Not only are my sales and profits up through the roof lately, it’s led to believe it or not, happier employees. Why? They drive home at the end of the day or at the end of the week knowing that they hit their goals. Knowing that they’ve contributed to a successful week for the shop and that certainly led to a happier shop owner!
      So, let me leave you with a question. Does each and every one of your employees on your team clearly know what you expect of them?
      If your answer is not a resounding YES, it’s time to put a pencil to paper and figure out each team employee or each team members weekly and daily Win.
    • By AutoShopOwner
      KEY POINTS
      The tight labor market can be a boon for blue-collar workers: They are more likely to find good-paying jobs and experience rapid wage growth. More employers are trying to tackle the aversion to manual labor jobs by offering workers higher salaries, tuition reimbursement and apprenticeship programs. Technology is also transforming blue-collar workplaces, making more advanced skills in demand. Across the country there are more drivers on the road, and many of them hanging on to their vehicles longer than ever. That means workers like Michael Gerhart are in demand.
      Gerhart, a master auto technician at Pep Boys, has been fixing cars for nearly three decades, keeping on top of his skills as technology advances and learning how to do his job in a new way. Today, his focus is on engine diagnostic work, including things like the driveability of vehicles and emissions testing for the state of New Jersey. He works on different vehicles throughout the day, flexing his knowledge base on makes and models of all kinds.
      “Cars have changed a lot, even in the past 10 years as far as the diagnostic end of things, and training has become more advanced as far as what’s required to fix the current vehicles,” Gerhart said. “It definitely doesn’t get boring and it’s always changing.”
      Some 46,000 automotive service technicians and mechanics will be needed to fill roles through 2026, according to the Bureau of Labor Statistics, at a time when the skills gap and worker shortage is particularly acute for blue-collar jobs. As economic growth is expected to continue in 2019, so too is a labor shortage both blue-collar and low-paying services occupations, a recent study from The Conference Board found. Baby boomers are aging out of the workforce at the same time the pool of available labor has become more educated, and thus less interested in blue-collar jobs.

      Automotive mechanics and technicians like Michael Gerhart are in high demand as a blue-collar worker shortage is expected to continue this year. Kate Rogers | CNBC “In the U.S., more than most other advanced economies, the American dream is to go to a four-year college and not have a manual job. For a while it was a not a problem because there was no shortage. Now, there is a big shortage, and people with a bachelor’s degree are just not interested in those jobs. There is a stigma connected to manual labor that is very hard to break,” said Gad Levanon, chief economist at The Conference Board. The report says the shortage will be most visible in transportation, production, health-care support, food services, cleaning and maintenance occupations.
      To help bridge this gap of available workers, Icahn Automotive, with brands like AAMCO and Pep Boys, recently launched its “Race to 2026” program, to invest in and support future automotive technicians and students who might have an interest in the trade. The program will offer scholarships, tuition reimbursement and apprenticeship programs, along with job placement and continuing education opportunities in partnering with schools like Lincoln Tech and Universal Technical Institute.
      Part of the message is that this isn’t the blue-collar work of years past.
      “I think there’s a stigma around, you know, the type of work and it’s still this old, kind of get-your-hands-dirty, greasy job. But as you look around, there’s been dramatic change in the way that a shop looks. And today’s shop is really more of a house of technology where students today should be thinking about that role as really a STEM career,” said Brian Kaner, Icahn Automotive Service and Real Estate president.
      While the median salary for auto service technicians and mechanics was around $40,000 a year in 2017, those with experience and more advanced certifications can potentially earn six-figure salaries during their career. The Conference Board study points out that continued tightness in the labor market, while frustrating for employers, can actually be a boon for workers: They are more likely to find good-paying jobs and experience rapid wage growth. For technicians like Gerhart, it can also foster a passion.
      “It’s been great doing this — I raised a family on this. It’s a challenging field to get into, but at the end of the day, I think it’s worth it. As long as you can keep up with the technology that’s out there and you’re given a chance to use it, it can be a very rewarding career,” he said.
      Source: https://www.cnbc.com/2019/03/08/skilled-auto-technicians-are-in-high-demand.html


  • AutoShopOwner Sponsors

Tire Rack: Revolutionizing tire buying since 1979.
Fast Free Shipping on All Orders Over $50

Fast Free Shipping on All Orders Over $50
×
×
  • Create New...