Quantcast
Jump to content
    • You can post now and register later. Already registered? sign in now to post with your account.
    • ×   Pasted as rich text.   Paste as plain text instead

        Only 75 emoji are allowed.

      ×   Your link has been automatically embedded.   Display as a link instead

      ×   Your previous content has been restored.   Clear editor

      ×   You cannot paste images directly. Upload or insert images from URL.


      Once you submit your question, a new topic will be created for you in our forums. Our moderators may move your topic to a more suitable forum category if one exists. Members will see your topic and be able to respond to your question.

    • This will not be shown to other users.
Gonzo

Article: Manual Reading - Manual Labor - - - It takes more than reading a manual to be a mechanic

Recommended Posts

Manual Reading Manual Labor

 

Reading and interpreting a service manual is part of a typical day at the repair shop. Probably not the most glamorous part of it, but then what is? Of course, after all the book work youre still not done. Now you have to take that information and turn it into a working repair and not just words on a page. Obviously, understanding what youve read is just as important as doing the actual work, and a great deal of the mechanics time is spent just researching a lot of todays automotive problems, even though labor guides (which are just a guide by the way) dont include any manual reading or research time as part of the final labor costs. (They should!)

 

Todays mechanic is more involved in computer systems and multiplexed data lines than most average consumers realize. The grease and grime is still part of the job, but you can spend just as much time chasing some electrical gremlin or interpreting a scope reading, as well as changing a water pump these days if not more. It comes down to the amount of research time, as well as the actual physical labor time you need to make repairs. It still surprises me how often someone will call and ask, How much? to do a certain job on a certain car and expect an exact quote. Regardless of the hundreds and hundreds of possibilities that could detour the repair. Sometimes its not a matter of how much but how long long as in how long its going to take to do the book work, reading the manual, and figuring out what the best course of action there is to take. (Thats not in any labor guide either.)

Theres a real difference between reading a manual, understanding what youve read, and doing the actual manual labor. Some people can read something and retain that information forever. They can ace any test on any subject as long as they read up on it previously. Then there are people who go to the other extremes. Theyre the type of people who have trouble taking a written test, but excel at hands on applications. Todays modern mechanics needs to be proficient at both. Me, I dont do as well as Id like to do in the retaining side of things, never did in school either, but I do have enough of it stuck back in that old noggin of mine to know where to find that written info the next time I need it. I know I dont have one of those photographic memories, and Im pretty sure theres no need in trying to stuff any more film up there aint no camera to put it in. Ive already got too much stuff to try and remember. Now some guys I know, they can remember the firing order on a 327 or the exact oil filter number for a given car. Meno way, Ive gotta look it up every time.

I see a variety of manual reading/manual labor related problems when a DIYr brings their car into the repair shop. You can tell when theyve glanced over the manual a few times, but couldnt put the information to good use. Most of the time, youll find their manual on the passenger seat with the pages marked. It probably has more to do with watching one of those weekend automotive shows or a You Tube video about how to make a certain repair. It all looks easy on TV. But when it comes time to applying that information to the tips of the fingers it just aint happenin. Oh, theyll put a gallant try to it, maybe mess it up worse than it was before they started but try they will.

One fella brought his truck in after replacing the front calipers at home. As he told me, It sounded easy to do in the manual. You know, remove a couple of bolts, install the new one, and bleed the brakes. Super easy. Even though he had read all the description pages and detailed instructions in the manual, somehow it just didnt work out. And, as usual, his repair manual was on the passenger seat. I made the repairs and even circled the photo in his manual so he could see where he went wrong. (On some cars there is a right and left caliper. If you put them on the wrong side the bleeder screws will be on the bottom instead of the top.)

I figure its something like thisanyone can turn a couple of bolts and slap on a few parts on, but theres a very special ability that cant be found in the manual. Thats mechanical aptitude. Its not about reading manuals or being able to turn those bolts. It has a lot more to do with understanding mechanical things. And, these days that includes electronics too. Its what separates average wrench turners and the true professional in the trade. Oh sure, if you spend enough time at anything youll get the hang of it, but sooner or later that lack of one or more of those qualities that separates good mechanics from the average ones will sneak up on ya.

Cars have changed tremendously from those early days of the first electronically driven engines. Today, a repair manual, common sense, and a whole lot of that mechanical ability needs to be applied to most any type of repair. Ok, I know what youre thinking, Well, there are some things my cousin Ernie can do and hes never opened a repair manual. True, but how far can he go before getting over his head? My guess is when something looks simple and then turns into something thats not is when cousin Ernie gets in trouble. From past experiences with these cousin Ernies anything is possible.

There are repair manuals out there that are strictly written for the DIYrs and other manuals meant for the professional. Those DIY manuals are great for basic repairs that arent explained in the owners manual. Certainly, most DIYrs would like to accomplish every conceivable problem on their own, but with todays cars they are far more sophisticated and require a higher degree of understanding and equipment than most DIYrs are willing to invest in.

 

I do believe that everyone who owns a car should have some basic working knowledge of how their car operates. Reading a manual is probably one of the best ways to do that, however thats not to say you need to fix it. Maybe reading the manual will give you a better idea of what to expect at the professional shop. Maybe it would be a good way to gauge whether or not youve chosen a true professional repair shop vs. some hack shop.

 

If, after some in-depth manual reading the problem looks to be too involved for you to tackle the manual labor part of the repair, then it might be time to take your car to the pros. Youll know who they are, and theyll know if youve read the manual or not because they have too.

 

Click here to view the article

Share this post


Link to post
Share on other sites



  • Similar Topics

    • By tylerl
      Hey guys looking for a little advise for people that have been in my situation. We are a smaller shop but really starting to transition to doing more volume in the past 2 years. Been in business for 10 years now and currently have 2 full time tech's and myself. I manage most of the office and service writing stuff and even occasionally help wrench in the back when required. Looking to hire a service advisor soon to help with the work load on the counter.
       
      Currently we just use a a mix of excel spreadsheets for invoicing and customer history, as well as Google calendar. My questions is will I see a big benefit from moving to a all in one management program? Is it worth the monthly fee's for a smaller outfit like mine? 
       
      Should mention we are in the powersports arena (mostly boat repair with some other rec equipment) so some of the platforms out there are not 100% tailored to our industry with the ones that are not offering up everything you would get out of a automotive program. Thanks in advance for the help!
    • By AutoShopOwner
      Massachusetts voters are deciding in this year’s election on whether they---and not the vehicle manufacturers---have control over the repair data generated by the vehicle they purchased.
      The Auto Care Association and the Coalition for Auto Repair Equality (CARE) have supported efforts by the Massachusetts Right to Repair Committee to obtain public support for ballot Question 1, which would give the consumer choice in vehicle repair. 

      “While the battle has been hard fought and expensive, the Auto Care Association is pleased that the most influential publications in the state have seen through the negative advertising campaign being funded by the vehicle manufacturers and have unanimously urged their readers to vote ‘yes’ on Question 1,” said Bill Hanvey, president and CEO, Auto Care Association. “We trust that voters in the state will agree with these publication that the right to repair is important and that advances in vehicle technology should not be used to limit the ability for owners to have their vehicle repaired by the shop of their choice."

      These “‘Yes’ on Question 1” endorsements include: 

      The Boston Globe on Oct. 13 declared, “The reason the new Right to Repair measure should pass is simple: It is inherently unfair for car manufacturers to have sole access to a vehicle’s mechanical data, because it gives their dealerships an advantage over independent auto-repair shops. That ultimately hurts consumers, because with limited options come higher prices.”

      The Boston Business Journal on Oct. 15 maintained, “Without the ability to repair cars equipped with wireless electronics, repair shops will see declines in business in coming years as car owners are forced to get repairs done at more expensive dealerships. In the end, more of the millions of dollars that Bay State residents spend every year to fix their cars would go to out-of-state manufacturers. More neighborhood car-repair shops will go out of business."

      The Sun Chronicle on Oct. 21 stated, “…we think the opponents of the law have done themselves no favors by overhyping the risks it poses. For example, the ‘No’ campaigners lean heavily on a statement from ‘Jane Doe Inc.,’ a Massachusetts advocacy group against domestic violence and abuse. But, on its website, that group now says its position on the referendum has ‘evolved’ and, while saying it’s staying neutral, complains that it’s wrong to use the fears of abuse survivors to promote a political position. For that alone, we think the opponents of Question 1 deserve to get their comeuppance at the ballot box.”
      The Berkshire Eagle on Oct. 21 stated, “Question 1’s opponents had ample opportunity to explain why this lobby should keep a monopolistic grip on your car’s telematics. They instead spent their campaign dishonestly fear-mongering in an attempt to distract consumers from asking why carmakers should be able to flout the spirit of the extant Right to Repair law to drive more repair jobs to their dealership garages. Hopefully voters will see through this charade.”
       
      For more information about the Right to Repair ballot initiative in Massachusetts, visit massrighttorepair.org.
      Source: https://www.autobodynews.com/index.php/northeastern/item/21245-right-to-repair-ballot-initiative-endorsed-by-major-massachusetts-news-publications.html?start=1
    • By Joe Marconi
      From as far back as I can remember, labor has always been an issue. As and industry, we have struggled to get paid properly for the work we do.  And those shops that understand how critical labor is, are the shops that have done quite well.  
      In today's auto repair shop world; Getting the right labor dollars is no longer a buzz topic or debate- Labor dollars will be the salvation of your business. Labor translates into profit, and will also allow you to build for the future and to attract the quality people we need in our industry. 
      If you don't know what your labor should be, you need to find out.  Don't call ABC Auto, down the street to ask him. The odds are he did not do the math. Plus his expenses are not the same as yours.
      Depending on what you pay your techs, your overhead, and knowing your numbers will determine your labor rate.  I can tell you that there are shops that are paying techs a very good wage and those shops are getting $135 to $150 per hour, and more.  That is not a typo.  And there are shops that have multi-tier rates. So, for Diag and labor jobs that have no parts associated with the repair, their labor is much higher than their standard labor.  It's fair, it's honest and it's time we all raise the bar. 
      Please, do the math, get help and make sure your labor is right for your shop. 
    • By Elite Worldwide Inc.
      Keep Your Shop's Summer Momentum Going! 
      Elite's Supercharge Your Shop, a series of 4 live online courses for shop owners, starts Sept 14th! 
      Learn to master your shop's numbers, recruit the top techs & advisors, maximize employee productivity, fill up your bays with your ideal customers and more!
      These live online courses will be taught by industry superstars Joe Marconi and Kevin Vaught, who have both experienced extraordinary success as shop owners, so everything you'll learn has been proven to generate extraordinary real world results!
       You have the option to either enroll in the whole Supercharge Your Shop course series, or pick and choose the individual courses that will help your shop the most. Here's the course schedule:
      Sept 14-15 - Mastering Your Shop's Numbers and Cost Control
      Sept 16-17 - Hiring America's Top Techs & Advisors
      Sept 21-22 - Maximizing Employee Morale, Productivity and Profits
      Sept 23-24 - Filling Up Your Service Bays with the Ideal Customers
      To enroll in the complete series of these 4 live online courses, just visit our Supercharge Your Shop Page to reserve one of our last openings!
       
       
    • By Joe Marconi
      We, automotive shop owners of America,  must take the opportunity of a lifetime and turn it into a bunch of success stories. What opportunity?  Look around you. The world is in turmoil. COVID-19, social unrest, uncertainty about the presidential election, the economy, how are we going to get out kids back to school, on and on and on.
      While the world is spiraling out of control, we have the power to make big changes to our auto repair shops.  And it can all be positive! 
      The Opportunity...
      First, the average age of a car in the U.S. is about 12 years old, attaining well over 200k on the clock. 
      Second, Uber, taxis and limo companies are suffering.  Guess why?  
      Third, the motoring public in the foreseeable future will be traveling by car, taking road trips like they have never did before.
      Fourth, the roads are packed with motor vehicles, as more and more people prefer their own car as their primary means of transportation. 
      Fifth, as the cars get older and older, more of them will be out of factory warranty.
      Sixth, independent auto repair shops have a vast amount of training, resources and replacement parts.
      Seventh,  the overwhelming majority of cars being build and sold today are still internal combustion engine powered cars. If you factor in the expected average age of car these days, we can safely bet that those gas engine cars being sold today will still be on the road in 2033 and beyond! 
      Eight, You need more?  That's not enough! 
      Get your plan in place.  Get your prices in line with making a profit. Don't give anything away anymore (I am mostly referring to checking, testing, diags of any sort!) Offer world class customer service. Be a leader of your employees.  Show the world what you are made of! 


  • AutoShopOwner Sponsors

Tire Rack: Revolutionizing tire buying since 1979.
Fast Free Shipping on All Orders Over $50

Fast Free Shipping on All Orders Over $50
×
×
  • Create New...