Another acronym being thrown around is ADAS, short for Advanced Driver Assist Systems. I think everyone is stuck staring at those four letters without understanding the liability that those 4 letters represent for the future of the automotive industry, regardless of how much safer they make vehicles on the road. As one of the first facilities in NJ to purchase and utilize the ADAS calibration system from Autel, we have some really unique experience with it and want to pass on some information you should be aware of when considering whether or not you want to jump in.
Facility Is Too Small - Size matters, A LOT with ADAS calibrations and if you have less than 2500 sf of space with a booming business... chances are you don't have the room to perform calibrations. Your exact business configuration will help determine this, but you ideally need a location where you can pick up 10 feet of open space all around a vehicle for most calibrations, but some calibrations may require 20 feet or more. Floor Isn't Level - If your floor is uneven, you can't perform ADAS calibrations, period. Can't Program? - If you are not experienced with programming modules or updating vehicle modules, you will not be able to perform a fair amount ADAS calibrations. Can't Diagnose? - If you don't have a team that can efficiently and accurately troubleshoot the vehicles already coming into your shop, ADAS isn't going to be any easier, it's going to be significantly harder. Who Needs OE Information, I have "X"! - Replace X with All Data or Mitchell or even the instructions in your scan tool. What happens when the manufacturer updated the information on the procedures yesterday and they didn't share that information with anyone yet? We've already encountered steps missing from the Autel scan tool... Minimum Insurance Policy Is More Than Enough - We have more than double the minimum and we are worried it's not enough. With lawsuits that settle into the tens of millions of dollars, we're not sure what enough is anymore. Don't Document Your Process? - This is where a lot of people will scoff. Who has the time? Save pictures and files, where am I supposed to do that? Who's gonna pay for this? We've figured this out and more importantly... we get paid for documenting. Do you? Mobile Calibrations? - Besides the fact that you're trying to transport $20,000 of equipment needed for calibrations in a van, this one is so serious... we couldn't give you a 2 sentence paragraph, read below. How are mobile glass services, like Safelite, performing calibrations on the go? We don't know, but we have A LOT of questions surrounding this. A recent calibration of a 2019 Toyota C-HR, after a windshield replacement, has some really interesting requirements. Requirements which we are used to, but we want to know... how is a mobile tech handling this? These are the requirements that must be met prior to starting a calibration:
It is our experience that once a windshield has been replaced, the vehicle should not be moved for a period of at least 2 hours (weather dependent) in order to allow the glue to harden properly. So, what's going on? Is the mobile glass tech filling up the vehicle prior to replacing the windshield? How many of you had a windshield replaced and a vehicle calibrated with a fuel tank that was not full? We don't know how many corners are being cut and where they are being cut... but what we do know is that the above requirements have been there in every vehicle we have calibrated at this facility thus far.
Lastly, pay particular attention to this requirement in this photo...
*Calibration should be performed in a window-less environment with no bright lights or reflective materials. Ensure no other black and white patterns similar to the calibration pattern should be behind the calibration pattern.
In a world where reducing liability is at the forefront of most public discussions, there are sure a lot of companies undermining their insurance policy in the field.
View full article
I'm trying to hire, and literally cannot find anybody. Ideally I'm looking for a full time parts hanger. Somebody that has little or no diag experience or isn't comfortable with electrical work, but can do the basics on their own. Where do I even try to look? I've tried CL and Facebook to no avail. I've called both of the local community colleges with automotive programs, and it's just crickets. I don't even want to pay them flat rate, I'll more than happily pay them hourly.
And PLEASE, for the love of god, I don't want to hear the lecture on 'you need to hire nothing but master techs'. That doesn't help me, nor fix my current problems. I know what I need. I just need help trying to figure out how to find it. Nobody becomes a mastertech without doing basics first anyways.
Twas the Night before Christmas (Mechanic style) Twas the night before Christmas, and all through the service bay, Not an engine was stirring, just old Santa’s sleigh. All the air hoses were hung, by the compressor with care, The mechanics had the day off, I’m the only one there. I was just an apprentice, but wanted to show St. Nick just what I knew, My boss was all for it, said it was OK if I turned a few screws. With visions of being a full time mechanic, dancing in my head I was going to give it my best shot; I’ll fix this old sled. I gave the key a twist,and listened in dismay, That little red hot rod needed service, in such a bad way Then from under the hood there arose such a clatter, That even St. Nick had to ask, “So, what’s the matter?” I flew from the driver’s seat and raised the hood in a flash, Nearly stumbling off my feet, from my quick little dash. The under hood light, glimmered onto the engine below, The fan belt had broken, and a spark plug blew out a hole. It’s something I can handle; I learned this stuff in school, I’ll have this fixed up in no time; it only takes a few tools, I started it up and all eight cylinders were firing away Just a few minor adjustments and he could be on his way That’s when I noticed, his sled was packed full of all sorts of toys… He hadn’t finished his deliveries, to all the girls… and boys. He was dressed all in red, from his head to his foot, And his clothes were all tarnished with ashes and soot Anxious he was, to finish his trip as soon as he could, With my wrenches a flyin’, he knew that he would. It was up to me, to get it fixed this very night, He still had a long way to go, before it was daylight. His eyes, how they twinkled, his dimples, how merry His cheeks were like roses, his nose like a cherry. And the beard on his chin was as white as the snow. I knew it was Christmas Eve, so I couldn’t say no, He had a broad face and a round little belly That shook when he laughed, like a bowl full of jelly. He was chubby and plump, a right jolly old elf, And I laughed when I saw him, in spite of myself. His sled was like new, after the job was all done, Now that it’s fixed, he could get back to his run. He reached into his huge bag, and pulled a box out with a jerk, Said he knew just how to thank me, for all of my hard work, I ripped open the present, and Oh, what a sight! Snap On wrenches and sockets! Boy was he right! As he pulled from the parking lot, he held the throttle to the floor, Just to show off, he passed by the shop, once more, This guy Santa, he’s a little strange, at any rate, He had a name for every cylinder, in his little V8. I could hear him shout, so loud and clear, Naming off each cylinder, as if they could hear. "Now, Dasher! Now, Dancer! Now Prancer and Vixen! On, Comet! On, Cupid! On, Donner and Blitzen! I heard the tires screech, as he caught second gear, Off to deliver those presents, some far, some near. Then, I heard him exclaim, just before he drove out of sight, “Merry Christmas to all, and to all a good night!”
View full article
By Ron Ipach
December spells the end of 2018, and hopefully you're wrapping up what was a fantastic year for your auto repair shop and business.
Now… it’s time to start thinking about how to make 2019 an EVEN BETTER year. (Heck, let’s go ahead and plan on making it your best year ever! Right?)
By attending for this special Live Online Webinar, you're going to get the proven 4-step process that will practically GUARANTEE 2019 to be a blow-out success for you.
With these four steps, you’ll be able to…
👉 ==> DOUBLE your take-home pay (Yes, that’s not a misprint. I’ll show you how.)
👉 ==> Magnetically attract more (and even better!) customers to your shop
👉 ==> Easily sell your services at higher prices than your competitors
👉 ==> Find, hire, and keep that elusive tech you’ve been searching for
👉 ==> Put the fun back into running your shop!
If you're interested... there is absolutely ZERO cost to attend this training.
All you'll need is 45 minutes of your day set aside in order to watch this webinar live.
For the dates, times, and registration details, CLICK HERE