Another acronym being thrown around is ADAS, short for Advanced Driver Assist Systems. I think everyone is stuck staring at those four letters without understanding the liability that those 4 letters represent for the future of the automotive industry, regardless of how much safer they make vehicles on the road. As one of the first facilities in NJ to purchase and utilize the ADAS calibration system from Autel, we have some really unique experience with it and want to pass on some information you should be aware of when considering whether or not you want to jump in.
Facility Is Too Small - Size matters, A LOT with ADAS calibrations and if you have less than 2500 sf of space with a booming business... chances are you don't have the room to perform calibrations. Your exact business configuration will help determine this, but you ideally need a location where you can pick up 10 feet of open space all around a vehicle for most calibrations, but some calibrations may require 20 feet or more. Floor Isn't Level - If your floor is uneven, you can't perform ADAS calibrations, period. Can't Program? - If you are not experienced with programming modules or updating vehicle modules, you will not be able to perform a fair amount ADAS calibrations. Can't Diagnose? - If you don't have a team that can efficiently and accurately troubleshoot the vehicles already coming into your shop, ADAS isn't going to be any easier, it's going to be significantly harder. Who Needs OE Information, I have "X"! - Replace X with All Data or Mitchell or even the instructions in your scan tool. What happens when the manufacturer updated the information on the procedures yesterday and they didn't share that information with anyone yet? We've already encountered steps missing from the Autel scan tool... Minimum Insurance Policy Is More Than Enough - We have more than double the minimum and we are worried it's not enough. With lawsuits that settle into the tens of millions of dollars, we're not sure what enough is anymore. Don't Document Your Process? - This is where a lot of people will scoff. Who has the time? Save pictures and files, where am I supposed to do that? Who's gonna pay for this? We've figured this out and more importantly... we get paid for documenting. Do you? Mobile Calibrations? - Besides the fact that you're trying to transport $20,000 of equipment needed for calibrations in a van, this one is so serious... we couldn't give you a 2 sentence paragraph, read below. How are mobile glass services, like Safelite, performing calibrations on the go? We don't know, but we have A LOT of questions surrounding this. A recent calibration of a 2019 Toyota C-HR, after a windshield replacement, has some really interesting requirements. Requirements which we are used to, but we want to know... how is a mobile tech handling this? These are the requirements that must be met prior to starting a calibration:
It is our experience that once a windshield has been replaced, the vehicle should not be moved for a period of at least 2 hours (weather dependent) in order to allow the glue to harden properly. So, what's going on? Is the mobile glass tech filling up the vehicle prior to replacing the windshield? How many of you had a windshield replaced and a vehicle calibrated with a fuel tank that was not full? We don't know how many corners are being cut and where they are being cut... but what we do know is that the above requirements have been there in every vehicle we have calibrated at this facility thus far.
Lastly, pay particular attention to this requirement in this photo...
*Calibration should be performed in a window-less environment with no bright lights or reflective materials. Ensure no other black and white patterns similar to the calibration pattern should be behind the calibration pattern.
In a world where reducing liability is at the forefront of most public discussions, there are sure a lot of companies undermining their insurance policy in the field.
View full article
Advance Auto Parts Expands TechNet Program with New and Enhanced Offerings for Professional Shop OwnersBy AutoShopOwner
Advance Auto Parts Expands TechNet Program with New and Enhanced Offerings for Professional Shop Owners Improvements designed to help strengthen relationships between shops and customers
RALEIGH, N.C.--(BUSINESS WIRE)--May 29, 2019-- Advance Auto Parts, Inc. (NYSE: AAP), a leading automotive aftermarket parts provider that serves both professional installer and do-it-yourself customers, is introducing new benefits and enhanced offerings to TechNet Professional members in 2019. These new benefits and offerings include insurance and affinity benefits, enhancements to the nationwide warranty, digital menu boards, a TireAmerica.com partnership and a TechNet-branded Virtual Vehicle tool.
TechNet is a business solutions partnership program from Advance designed to help independently owned repair facilities grow their business and develop customer loyalty while maintaining their own identities and serving their local communities. More than 10,000-member shops across the United States and Canada are part of the TechNet banner program creating a trusted network of automotive repair shops across North America.
“We continue to listen to our TechNet members, many of whom have been partners of the program for more than 20 years, and are leveraging the feedback of shop owners and operators to introduce new benefits and optimize the banner program,” said Walter Scott, Senior Vice President of Professional Marketing and Programs at Advance. “TechNet is a key component of delivering the right experience and solutions to Professional customers. Ultimately, we strive to help our customers serve their customers better and grow their business as independent operators.”
The launch of a new insurance and affinity benefits program was a top priority to current TechNet customers. The insurance benefit program enables TechNet member shops to access health insurance plans for the individual, family or small business, including medical, dental, life, prescription discounts, disability and pet insurance. Business coverage, as well as HR and payroll services, launched in May.
Among the new enhancements for 2019, TechNet’s nationwide warranty has been simplified for an improved customer experience for both motorists and member shops. When motorists have service and repairs performed by an authorized TechNet professional service facility, they are covered by a nationwide limited repair warranty that extends across North America for 24 months or 24,000 miles, whichever comes first. At the same time, TechNet also increased value for member shops by increasing the rate paid for local labor reimbursement claims.
The TechNet digital menu board is a new benefit included in membership that displays the shop’s services and pricing, as well as educational programming related to car maintenance and care, on a smart TV in the customer service area of a TechNet member’s shop. This digital menu board is customizable, enabling shops to make updates in real time to showcase their offers, and TechNet can also provide custom content tailored to the shop’s program preferences.
TechNet’s new national installer program partnership with TireAmerica.com gives shop owners the ability to offer their customers access to Tire America’s inventory for a wide range of vehicles. This partnership allows customers to select the necessary tires for their vehicle online, with Tire America shipping the tires directly to the TechNet shop for installation.
Virtual Vehicle, another important element of TechNet, supports the service recommendation by bringing the inspection results to life via vehicle system animations that illustrate the cause and effect of each problem. The inventory of more than 400 animations can be viewed in the shop lobby or can be emailed or texted to the customer allowing them to make an informed decision with confidence. Virtual Vehicle is also integrated with several shop management systems that enable the animations to be included in a regular communication process, and can easily sent to a customer via text or email. Finally, a customized loop of animations can be served on a lobby monitor or embedded in the shop website providing customer education opportunities.
“The enhancements introduced recently are programs that truly benefit our business,” said Christa Browne of Dave’s Automotive in Stockertown, Pa. “For example, increased labor rate reimbursement for warranty items speaks volumes to Advance’s commitment to bring us the best quality parts backed by the best industry warranty. We’re keeping our customers very happy knowing we stand by our work. That is commitment.”
For more information about TechNet and other services available from Advance, visit technetprofessional.com or call 1-877-280-5965.
About Advance Auto Parts
Advance Auto Parts, Inc. is a leading automotive aftermarket parts provider that serves both professional installer and do-it-yourself customers. As of April 20, 2019, Advance operated 4,931 stores and 146 Worldpac branches in the United States, Canada, Puerto Rico and the U.S. Virgin Islands. The Company also serves 1,238 independently owned Carquest branded stores across these locations in addition to Mexico, the Bahamas, Turks and Caicos, British Virgin Islands. Additional information about Advance, including employment opportunities, customer services, and online shopping for parts, accessories and other offerings can be found at www.AdvanceAutoParts.com.
View source version on businesswire.com: https://www.businesswire.com/news/home/20190529005545/en/
Source: Advance Auto Parts, Inc.
Advance Auto Parts Contact:
T: (540) 589-8102
E: [email protected]
T: (919) 227-5466
E: [email protected]
Twas the Night before Christmas (Mechanic style) Twas the night before Christmas, and all through the service bay, Not an engine was stirring, just old Santa’s sleigh. All the air hoses were hung, by the compressor with care, The mechanics had the day off, I’m the only one there. I was just an apprentice, but wanted to show St. Nick just what I knew, My boss was all for it, said it was OK if I turned a few screws. With visions of being a full time mechanic, dancing in my head I was going to give it my best shot; I’ll fix this old sled. I gave the key a twist,and listened in dismay, That little red hot rod needed service, in such a bad way Then from under the hood there arose such a clatter, That even St. Nick had to ask, “So, what’s the matter?” I flew from the driver’s seat and raised the hood in a flash, Nearly stumbling off my feet, from my quick little dash. The under hood light, glimmered onto the engine below, The fan belt had broken, and a spark plug blew out a hole. It’s something I can handle; I learned this stuff in school, I’ll have this fixed up in no time; it only takes a few tools, I started it up and all eight cylinders were firing away Just a few minor adjustments and he could be on his way That’s when I noticed, his sled was packed full of all sorts of toys… He hadn’t finished his deliveries, to all the girls… and boys. He was dressed all in red, from his head to his foot, And his clothes were all tarnished with ashes and soot Anxious he was, to finish his trip as soon as he could, With my wrenches a flyin’, he knew that he would. It was up to me, to get it fixed this very night, He still had a long way to go, before it was daylight. His eyes, how they twinkled, his dimples, how merry His cheeks were like roses, his nose like a cherry. And the beard on his chin was as white as the snow. I knew it was Christmas Eve, so I couldn’t say no, He had a broad face and a round little belly That shook when he laughed, like a bowl full of jelly. He was chubby and plump, a right jolly old elf, And I laughed when I saw him, in spite of myself. His sled was like new, after the job was all done, Now that it’s fixed, he could get back to his run. He reached into his huge bag, and pulled a box out with a jerk, Said he knew just how to thank me, for all of my hard work, I ripped open the present, and Oh, what a sight! Snap On wrenches and sockets! Boy was he right! As he pulled from the parking lot, he held the throttle to the floor, Just to show off, he passed by the shop, once more, This guy Santa, he’s a little strange, at any rate, He had a name for every cylinder, in his little V8. I could hear him shout, so loud and clear, Naming off each cylinder, as if they could hear. "Now, Dasher! Now, Dancer! Now Prancer and Vixen! On, Comet! On, Cupid! On, Donner and Blitzen! I heard the tires screech, as he caught second gear, Off to deliver those presents, some far, some near. Then, I heard him exclaim, just before he drove out of sight, “Merry Christmas to all, and to all a good night!”
View full article
Breaker, Breaker… In my many years of repairing cars I’ve helped out a countless number of other shops with their electrical problems. Some shops I would see a few times a month, and others only once in awhile. This was years before the internet was around, and cell phones were only a fad and way to expensive to have. So, most everything was done by a land line or over the CB radio. Back in the mid 80’s and 90’s I had one shop that I talked with nearly every day. Great guys, but not so great as mechanics. The owners name was Joe. His shop was small and seemed to be a place for wayward towed vehicles and obscure customers looking for dirt cheap repairs. His main business was his tow service, and the repair shop seemed to be there just to fill in the gaps on those slow days. One afternoon I got a call from Joe about a car his crew had given up on. They threw the parts cannon at it, but couldn’t get this car to come back to life. Joe was with tows, and needed the mechanics he had to drive the other tow trucks. This particular car had been in his shop for quite some time and I don't think the customer was too happy about it. So, to speed things up a bit, he dropped it off at my shop. “I’ll be on the road all day. I've got to get back out there. I've got tows lined up all day. If you get it going, could ya run it back to my shop,” Joe said, as he made a dash for his tow truck. “No problem Joe, I’ll get right on it,” I said, just as he drove off. The car was an 80’s GM. I could see all kinds of shiny new components under the hood, and could tell they put a lot of effort into swapping parts to find out what was going on. The symptom was; if you flipped the key to the crank position it would immediately start, but die just as quickly. The parts they changed were the predictable parts cannon fodder that the typical parts slapper would try. Tune-up parts, an IAC, TPS, MAP, ECM, etc… etc… all of which might, could, should’ve, probably, maybe, and of course, eventually with enough darts thrown at it, could have hit the target and fixed it. But it didn’t. I wasn’t about to go that route. Time for some real diagnostics and not just shoot from the hip. Why not start with the basics- fuel, air, and fire. Spark was good, timing looked good, and the intake had a good air pull. I gave it a shot of carb. cleaner, and as long as I kept spraying… it kept running. Ok, time to check the fuel pressure. Interesting... there was pressure. Hmmm, now what to do? The next obvious thing (to me) was to check fuel volume. I disconnected a fuel line and gave the key a flick into start. The fuel shot out into the drainage bucket, but then trickled to a stop. I did it a second time. Not as much fuel made it out this time, but the scenario was basically the same. It was always a quick burst followed by a trickle. Maybe I should look at that gas gauge. Well, wouldn’t ya know it, the gauge is ready E. It had just enough in the tank to pressurize the fuel lines but not enough to keep it going. Might as well grab a gas can, and put some in the tank. I’ll try it again… vroom, vroom, vroom, alright! It’s running great! Looks to me as if the entire problem was that it was out of gas. However, with all the new parts they installed, I couldn’t be sure if this was the 'only' problem or an after affect of having the car in the shop so long while trying to solve another problem. It could have been any one of the other components (within reason) they changed that really 'did' need to be changed. Later that day I drove the car back to Joe’s shop. He wasn’t there, but his dispatcher was in the office sorting out tow tickets and monitoring the CB with the volume up full blast. In the background you could hear the CB chatter from all the area’s tow companies. About then I heard Joe’s voice over the CB, “Did Gonzo call yet? Need to check in on him, we need to get that car back to the owner.” “He just walked in Joe, over,” the dispatcher told him. “So what was wrong with it,” Joe asked between the squelch of the CB radio and all the other chatter from the other tow companies. The dispatcher turned to me and pointed at the mic. So, I told him . The dispatcher, with a stunned look on his face, said, “I can’t tell him that. He is going to be so pissed.” “I don’t think you should either. At least not until he gets back,” I said, while breaking into an ear to ear smile. The CB comes back to life with Joe’s voice again; “So what did he find out, over,” Joe's frustration was showing through as his voice barked out of the CB speaker. The dispatcher said to me, " Old Joe sounds pretty pissed." I don’t know whether it was the way his day was going or how much time and money he's spent on this car. Either way, he’s not going to like this answer. “Go ahead… tell him,” I said to the dispatcher, still sitting there hold the mic button, “He wants the answer, so let him have it.” “Alright, Joe, are ya ready for this, over?" the dispatcher said, then waited for a response from Joe. "Yea, go ahead, over." "It was out of gas.” A dead silence came over the CB. No chatter, nothing, not another sound for what seemed to be an eternity. Then, all hell broke loose. Tow drivers from all over the city were razing poor Joe. The CB was full of laughter and goof ball comments, but not a word from Joe. Poor Joe, you asked for it, and now you got it. “Tell Joe to stop by the shop, he can settle up with me then,” I said, while trying to hold back the laughter. As I walked out the door, the CB chatter could be heard all the way to the parking lot, and the comments were still flying. It was one of the funniest moments I’ve ever had for doing nothing more than putting gas in a car. When Joe came up to pay the bill I told him I had a little something for him. I handed him a little tiny gas can on a key chain. I figured it might be a good reminder for him to always check the basics before loading up the parts cannon again. After all these years I’m sure he hasn’t forgotten about it, and I’ll bet he doesn’t tell too many people where he got that little gas can key chain from… but now, it wouldn't be so much on the CB, but over the internet.
View full article