Quantcast
Jump to content


    • You can post now and register later. Already registered? sign in now to post with your account.
    • ×   Pasted as rich text.   Paste as plain text instead

        Only 75 emoji are allowed.

      ×   Your link has been automatically embedded.   Display as a link instead

      ×   Your previous content has been restored.   Clear editor

      ×   You cannot paste images directly. Upload or insert images from URL.


      Once you submit your question, a new topic will be created for you in our forums. Our moderators may move your topic to a more suitable forum category if one exists. Members will see your topic and be able to respond to your question.

    • This will not be shown to other users.
Gonzo

Article: Drain the Swamp and Count the Alligators - - - Ocassionaly the customer has more confidence in you than you might have in yourself.

Recommended Posts

Drain the Swamp and Count the Alligators

 

Occasionally the customer has more confidence in you than you do yourself.

 

The old farmer tells his hired hand, "Get down there and drain that swamp today."

 

The hired hand says, "Looks like there's a heap of alligators in there."

 

"Don't ya never mind about them gators, you just get that swamp drained!" the old farmer explains.

 

Some days I feel like the hired hand. I'll get a job in, and I already have the feeling there is going to be a whole heap of alligators between me and draining that swamp. This time around it's a 2004 Nissan 350z with a non-functioning convertible top. The top was up, but wouldn't move, other than unlatching the rear (5th bow) window section of the top.

 

Jim is an old customer who loves his little Z car, and was well aware of a few of the alligators lurking under that deck lid. How did he know? Easy, he already tried to get it repaired at a convertible top shop, but they weren't up to the task of taking on this alligator infested swamp.

 

Jim's only comment to me was, "I don't care how many problems you find, just get it working for me."

 

After gathering all the TSB's, wiring diagrams, procedures, and any other bits of info I ventured out into untested waters to see what I could find out. All the test procedures started out by checking pin-out voltages and resistances at the convertible top ECM, and guess where that is?… under the very same deck lid that isn't moving… hmm, imagine that. The trunk is the only option. You've got to crawl in there and find the cables to release the deck lid manually.

 

You could tell somebody else had already been working on it; the emergency cables were nowhere to be found. I looked like some sort of contortionist trying to get down into the small little opening at the bottom of the trunk with my bore scope. I had to wiggle it around in there, until I found the very thin wire cables that would release the latches. (They were pushed back under the lining of the storage area, which is not accessible from the trunk area) Ugh, I haven't even moved the top yet and I'm already swimming with the gators… what could be next?

 

Once I got the deck lid up I could then remove the interior trim and test the ECM to see what needed to be done. The output voltage for the 5th bow actuator motor was coming out of the ECM, so unless the wires are broken or disconnected the motor must have failed. Ok, now crawl out of the storage area and wrestle my way into the passenger compartment, then pull the trim piece on the back window up to expose the 5th bow motor. The motor brushes were shot. Lucky for Jim, I just happened to have some brushes that were a perfect fit. Might as well replace the brushes and see if it will work.

 

I gave it a try. With a flip of the control button the 5th bow swung up into perfect upright position, but the top wouldn't move. What now!?!? Back to the ECM and check the stop switches and motor voltages to the top. This time the alligator is in the ECM. Inside the ECM I found the circuit board lead to the top motors was burnt in two. Ok, fix the circuit board and try again. The top moved smoothly through its folding process. As the top closes the 5th bow actuator has to rotate in the opposite direction, so it will sit flush inside the convertible top storage compartment. As the bow moved to its next position the whole thing quit again. Oh come on… enough already… more alligators?!?! Yes, more alligators. Another trip back to the ECM, this time I found the stop switch for this position wasn't working. Somebody had bent the micro switches so far out of whack there was no way most of them were ever going to work. By now I've called Jim at least a dozen times to keep him informed of what I was up against… his only answer, "Keep draining the swamp" Ok, Ok, I got it… I'll put my waders on and crawl upside down and sideways to get this thing working… but…man these alligators… they're everywhere.

 

If you counted the different movements from completely up to fully down there are 12 separate electrical/mechanical operations the top has to go through, AND they all have to work in the correct sequence. One micro switch out of position and something else begins to move at the wrong time.

 

I thought I was done with my alligator counting by the time I had the last micro switch in place, but the first time I got the top to fold up and drop into the storage area, it would stop about an inch or so from completely going down. Seriously? More gators on the prowl? What did I miss this time? I went thru all the electrical and mechanical diagrams again… Nothing, every step was correct, but there had to be something missing. Then I found the answer on one page. One short reference to some elastic straps that connect the 2nd bow to the 3rd bow. These straps spring the 2nd bow towards the rear of the car to allow for clearance, so the canvas and all the linkage arms can drop that last inch or so into the storage compartment.

 

I did some more searching and found the part number 97150-CE01B "strap, elastic, convertible top". I called the dealer and gave them the number…

 

"Yea, it's a good number, but we've never sold any."

 

I'm shocked. From what I found out lots of these convertible tops had the same problem. I figured they would have changed hundreds of these. It looks like it's a common alligator in this part of the swamp; seems to me every top should probably have these replaced with the new part number, (know somebody with one?… give them that part number).

 

"Well, get me a set of them."

 

Once the parts came to the shop, installing them was a piece of cake compared to everything else I had to do. At least now I could see the bottom of this swamp. No more alligators, no more swamp to drain… I'm done. I found 20 different problems in the top mechanisms and electrical components. That's a total of 20 alligators that were lurking in this swamp. What a job!

 

It took a lot of effort to solve all the problems that I found. It didn't matter much to Jim how many things needed taken care of, the smile on his face as the 350z top worked like new made all that gator wrestling worthwhile. I almost gave up on it several times, but Jim insisted that I keep at it… I'm glad I did.

 

So the next time I take on one of these gator infested jobs, I know exactly what I'm going to do. Ignore the difficulties, and do just like the old farmer told his hired hand to do.

 

"Drain the swamp, and don't pay no mind to all those alligators".

 

 

 

Writing my column is the fun part of my week, repairing cars is what I do for a living. On occasions the repairs can be very overwhelming. Difficult, time consuming or just plain seem impossible. Thanks to customers like Jim who have total faith in your abilites those impossible tasks turn into possible.

 

 

Click here to view the article

Share this post


Link to post
Share on other sites

We allow visitors to read the first post of each topic. To read this post, please login or register for a membership. 

Share this post


Link to post
Share on other sites

We allow visitors to read the first post of each topic. To read this post, please login or register for a membership. 

Share this post


Link to post
Share on other sites

  • Similar Topics

    • By Joe Marconi
      With so many uncertainties these days, there is one strategy that we can all do that will help to smooth out our overall sales and customer visits throughout the year.   Make sure the experience is always amazing during the entire customer visit. And perform the car delivery that gives the customer a reason to return.
      Here's the key part before any customer leaves your shop: Make sure you discuss their next service appointment and any other future recommendation.  Let them know that they will get a reminder by either post card, email or text.  BUT, there is one more thing you can do to boost your customer retention, get permission from your customer to call them a week prior to their next appointment.  Yes, give them a phone call.  Try it, and give it time to work.
      Oh....won't work, you're thinking??? Well, here's list of businesses that do it: Dentists, doctors, nail salons, hair dressers, chimney cleaners, boiler service companies and Successful Auto Repair shops. 
    • By JustTheBest
      Hey, thanks for stopping by. Join me Monday, July 20th as I premier this video - How to Make Your Offers IRRESISTIBLE! 

      I'll be live on the chat to answer any questions!
      See you there!

      Matthew
      "The Car Count Fixer"
       
    • By Joe Marconi
      We all know the expression, "The Customer is always right." But is that really true?
      The other day a customer walked over to my tech and starting to scream at him for failing the NY State annual inspection. 
      I intervened and told the customer to stop and get away from my employee. I also told him that I would not tolerate anyone yelling and screaming at one of my employees. 
      Should I have been more "reserved" and try to defuse the situation?  Should I have "politely" listened to the customer's issue?
      Have you been in this position and what would you do? 
       
       
    • By Elite Worldwide Inc.
      By Bob Cooper
       
      During difficult times like these it's important to look for creative ways to keep your shop's name in the minds of your community members. Here are 3 easy-to-implement tips that will help your shop build its brand recognition in today's climate. 
       
      1. If you have a shuttle or any type of vehicle that features the name of your shop, it's important to get that vehicle out in your community. There are plenty of charitable organizations you could partner with that may need delivery assistance, such as Meals on Wheels. You could also provide a shuttle service for local retirement homes and any other group that may need assistance getting around your community, or you could even deliver groceries or household items to these groups. Getting your business's name out there and helping your community will certainly help people remember your shop.
       
      2. Host an online course for people who are currently stuck at home. One specific idea is to host an online car care clinic for new drivers, teaching them things like how to maintain a car, how to deal with a flat tire, how to read and use their car's owner manual, and other similar topics. Not only will this help them learn vital information, but it will give them an indoor activity to focus their attention on, which I'm sure their parents will thank you for. 
       
      3. Now more than ever, it's important to have the right attitude each day. This is crucial not only for your own well-being, but for the well-being of everyone around you. A positive outlook will permeate throughout your staff and your community, and show people the type of business you have; one that views each day as a new opportunity to build a wonderful life and a wonderful company. 
       
      For additional help building a more successful auto repair business, feel free to give us a call at 800-204-3548 or visit the Elite website. 

      View full article
    • By JustTheBest
      Here's 14 Secrets that virtually guarantee car count - in ANY Economy!

       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      Hope this helps!
      Matthew
      "The Car Count Fixer"
       


  • AutoShopOwner Sponsors

×
×
  • Create New...