I'm trying to hire, and literally cannot find anybody. Ideally I'm looking for a full time parts hanger. Somebody that has little or no diag experience or isn't comfortable with electrical work, but can do the basics on their own. Where do I even try to look? I've tried CL and Facebook to no avail. I've called both of the local community colleges with automotive programs, and it's just crickets. I don't even want to pay them flat rate, I'll more than happily pay them hourly.
And PLEASE, for the love of god, I don't want to hear the lecture on 'you need to hire nothing but master techs'. That doesn't help me, nor fix my current problems. I know what I need. I just need help trying to figure out how to find it. Nobody becomes a mastertech without doing basics first anyways.
Article: The Ghost Mechanic - those mechanics that seem to leave evidence of their bad work that you find... or was it a mechanic after all?By Gonzo
The Ghost Mechanic
Creepier things have happened, but rarely do things go without an explanation. This time around it’s the mystery mechanic who seems to have been working on this guy’s car, or maybe not. Maybe it’s that ghostly mechanic who haunts people’s cars on quiet neighborhood streets in the middle of the night. You know, that guy who leaves nothing but telltale greasy finger prints or unattached wire harnesses, or even loose bolts where loose bolts shouldn’t be. This job was no exception to the antics of the invisible mechanic’s handy work. It’s a mystery worth solving.
A Chevy HHR was towed in for a no start condition. It wasn’t exactly a no start; it was more like a poor starting/running condition. When it would run, the poor thing sounded like it was on its last trip to the garage and its first trip to the salvage yard. Trying to beat it to its last ride on the tow truck, I hooked up the scanner to see what inner mysteries were present. Code P1682 (Ignition 1 switch circuit 2), but I wasn’t done yet. Time to do a complete health check on all the modules. Sure enough, the ‘U’ codes were off the charts. Seems we have a lot of low voltage codes causing a problem.
A quick check of the wiring diagram showed the power led to a voltage input lead for the PCM, TCM, and several other circuits that would definitely lead to a rough, hard to start, non-cooperating HHR. This may turn out to be a simple problem after all. Could be wiring, a component, or perhaps a fuse box problem. A quick glance at the fuse box didn’t reveal much, but I should probably take a closer look at that fuse box. Maybe go as far as physically checking the actual fuse circuit. Hmm, something is amiss here. The fuse is good, but the fuse is in the wrong slot. The slot that it’s in should be an empty slot. Seems somebody was fooling around under the hood and didn’t put the fuse back correctly.
Might as well try moving the fuse back to the proper location. Well, imagine that, this old HHR starts right up! OK, it’s not running the best . . . yet. Do a little throttle relearn and it runs as good as new.
After rechecking the related circuits for any damage, or out of place items I gave the HHR the once around the block test. Runs great, sounds great, no warning lights, no unusual noises, seems fine to me. I guess I’ll write up an invoice on this job and call the customer. As I closed the hood, the telltale greasy hand prints from the last guy who was under the hood were everywhere. I think I spent as much time cleaning this guy’s hood as I spent diagnosing the problem.
I gave him a call and explained to him, as best I could, what I had found. Although, I did have that one nagging question regarding who had worked on the car previously. I really wanted an answer to that question.
"NOBODY" … are you serious? That’s when I explained the entire repair all over again. Between the greasy finger marks on the hood and fenders, and the fuse in the wrong place, I’m afraid I’m not going to buy the story that the mysterious ghost mechanic has struck again. His only explanation came down to the whole thing must have been a poltergeist or something. Or ‘someone’ not ‘something’ is a better way to put it. I’m not buying the ghost mechanic theory. At this point, he seemed to be more intent on finding out the final bill, and not so much on solving the mystery of how the fuse mysteriously moved into a different slot.
But, before I gave him the total, I recommended he perform an exorcism on his car, since ‘NOBODY’ has been touching it. His response, "How much more will that cost me?” Seriously? Now, I’ve been asked to do all sorts of things to a car, like put a helicopter landing pad on the roof, remove a varmint from behind the dash, or turn a Prius into a tow truck, but I don’t think I’ve ever been explicitly asked to do an exorcism on the family truckster. Actually, I’m starting to put this whole thing together.
The mystery mechanic is none other than this guy himself. His answers to certain questions, and how he told his story were a dead giveaway as to who the ghost mechanic was. I swear some people just can’t be honest and admit when they’re beyond their learning curve. We both might have had a good laugh over the whole thing, but instead this guy wants me to drop the price in half, since it was such an ‘easy’ repair and all, and ignore the whereabouts of this seemingly ghostly apparition with the mindless ability to screw up the family car. But, since this guy wouldn’t own up to it, even with the evidence of his very own greasy paw prints, he’s in for a lesson of honesty, awareness of his own abilities, and how to pay for a professional diagnosis.
It’s just another case of the mechanic solving the mystery of the proverbial ghost mechanic. Debunking wives’A tales about the modern automobile, supernatural occurrences under the hood, and apparitions that seem to move fuses around is just another duty of the modern mechanic. Oh, and don’t think you’re the first person who’s tried the ghost mechanic as your method of passing the blame… you’re not. Every good mechanic has performed their fair share of exorcisms in the past and have seen the results of the mystery mechanic and his endeavors. We know who you really are.
View full article
Free webinar for all members hosted by @Ron Ipach from Captain Car Count!
As you already know, finding good, qualified technicians isn’t as easy as it was in years past. Gone are the days of simply placing a few ads online or in the newspaper help-wanted section.
When you combine the fact that more shops than ever are in the hunt for qualified applicants, with the ever-shrinking pool of technicians to draw from, it’s no wonder so many shop owners are frustrated with their search.
Attracting good technicians today requires a radically different approach, and on this highly informative online training event, Ron Ipach, president of Repair Shop Coach, will walk you through the same strategies that his clients are using to attract lots of highly qualified to their shops on a consistent basis.
CLICK HERE TO REGISTER
Time slots vary and are held weekly:
Please reach out to @Ron Ipach for additional information.
By Joe Marconi
A recent Wall Street Journal Article stated that self-driving cars could eliminate 90% of all accidents, prevent up to $190 billion in damages and health costs and save thousands of lives annually. This was reported by Mckinsey & Co, a consulting firm. That's the good news.
The bad news. What will it do to the collision business? If these predictions are true, this will change the auto collision business. Will this be an event as big as the transition from the horse and carriage to the automobile?
By Jay Huh
Knowing what you know now, how much would you have paid to know all this information when first starting out? I would have gladly shelled out $1000-$2000 and I was broke in the beginning! I would have saved a lot of money too by not making the mistakes I've made