Quantcast
Jump to content









hourly rate , not enough?


Recommended Posts

We are in Miami and can't get a feel for the average hourly rate. Other shops either won't tell or aren't reputable. We are AAA approved and been here 23 years and charging $99.00 per hour and would like to raise it. Any thoughts on what's appropriate.

Link to comment
Share on other sites

That is a difficult question to answer on a national message board. I would suggest first figuring out what your labor rate needs to be so you are profitable to the level you desire. Then I would call local dealers and indys and do a labor rate survey. Be honest, tell them who you are and why your calling. We are trained not to answer the labor rate question but when someone calls and tells me who they are and why they are asking I am usually more than happy to give them the number they are asking for.

We are in Chicago and I suspect overall costs are similar and we are at $120 and looking to go up. I can tell you when we were at $99 I was afraid of the xxx figure so when we decided to do it we went to $114. If your going to do it you might as do it right :)

  • Like 2
Link to comment
Share on other sites

Wheelingauto, can you comment on the response from customers to your price increase?  We've always made small increases successfully but we've never tried a larger jump.  However, it's harder and harder to find techs so I think this type of increase may be warranted soon.  

  • Like 1
Link to comment
Share on other sites

Pricing is a hot topic as always. Food for thought though, when was  the last time someone scrutinized what your hourly labor charge was? More often than not if a customer has a problem with pricing its either a comparable from another shop's estimate or its a blanket statement of, "Thats expensive" or "Thats too high" or something along those lines. I live by the rule of thumb that if you are providing high enough matching value then the RIGHT customers won't complain (the majority of the time). The rare cases you may have a bottom feeder customer that won't be happy unless you take a few dollars out of your own wallet to fix their car. Otherwise I have never had a problem with labor rate increases. I've done probably 5-6 in the last 5 years. 

  • Like 2
Link to comment
Share on other sites

12 hours ago, jfuhrmad said:

Wheelingauto, can you comment on the response from customers to your price increase?  We've always made small increases successfully but we've never tried a larger jump.  However, it's harder and harder to find techs so I think this type of increase may be warranted soon.  

As said above. No one really questions dollar per hour charges. When we went up I can't remember a single comment about it. 

  • Like 2
Link to comment
Share on other sites

A good way to price your labor rate is to take your most expensive tech's pay rate, then add in uniforms, benefit costs, FICA, workers comp, etc until you have the loaded cost of having a technician. From there multiply that number by 2.5 to get to a 60% profit margin. For example a $30.00 tech probably costs you about $39.00 per hour, times 2.5 is about $98.00 per hour labor rate, at the least.  

  • Like 4
Link to comment
Share on other sites

Thanks Harry.  Just for reference for a smaller town we are in Minnesota 45 minutes north of Minneapolis.  We were at $98 18 months ago.  Now at $102.  Chevy dealer in town is $118 and Ford is 15 miles away at $135.  I'm thinking of going to $105.

  • Like 1
Link to comment
Share on other sites

Wow we are in a small town one hour from Louisville Kentucky at 65.00 per hour. When we moved here the very first comment was welcome to the Twilight Zone. No one here truly understands the cost of staying in business


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

I am in rural Iowa 5 miles from Minnesota border. Town of 6000 people and we are at 101.93. I merged with the shop across the street at the beginning of the year.

I was at 100 and he was as at 92. I changed it after a week. No one noticed. If I went up another 10 tomorrow no one would still notice. At this level $10 basically equals .1 per hour. No customer has a clue if the job books for 1.5 or 1.8. If someone is afraid to raise labor rate just index all labor by 1.1 or 1.2.

The industries around me are paying 18-20 per hour with good benefits. I have to pay my guys well to keep them and they deserve better wages. They are educated workers and I rely on them heavily. At the rate of inflation and how far behind my area is. We should be around 120.

  • Like 1
Link to comment
Share on other sites

I agree with working based off your technicians pay, at least for a starting point. 70% GP is the standard I was taught (not loaded). That gets you where you need to be to make your proper margin. From there, shop around. You might be leaving some on the table. I called a few other shops around town and once I explained who I was and why I was asking (I didn't want to the 'that shop' that isn't charging enough), everyone was glad to share their rates. 

I ended up raising my labor rate and I never heard any complaints. Sure, there are some jobs I probably lose to pricing, but only to those customers who care about the price and price only... and those aren't my ideal customers

Link to comment
Share on other sites

This week my techs are starting a base salary + flag... I told them Thursday at lunch time. My SA told me Friday morning he can already tell they are turning out work quicker :/ ...I shouldn't have waited so long

Link to comment
Share on other sites

About 15 years ago I was in dire straights. I was dangerously close to having to lock the doors and going home. I calculated my break even point, and what my labor rate would have to be to survive. Not make money, just to stop losing money. I raised my labor rate $15.75 in one day.  Not one single customer complained. Not one. The only complaint I got was from my advisor, which ended quickly when I gave him the choice between selling the new labor rate, or going home forever.

The bottom line is that no customer is going to complain. Charge what you have to charge to make your business successful, and stop worrying about raising the rate a few bucks to do it.

  • Like 5
Link to comment
Share on other sites

49 minutes ago, xrac said:

This is a post that every shop owner should read. Too many of us have picked labor rates based upon no financial calculations. 

Picking a labor rate based on what everyone else is doing makes no sense at all. Obviously you want to know what the competition is doing, and if the math says you have to be way above them or way below, why is it that way? But the bottom line is that your expenses are not their expenses, and you have to make what you have to make to stay in business, and be profitable enough to be around to serve your customers next year.

  • Like 2
Link to comment
Share on other sites

I should add, when I moved my techs to commission pay, I did the math to make sure I was going to hit my margins, no matter how many hours they ran. I made a spreadsheet with formulas and entered all sorts of different combinations of hours...

Link to comment
Share on other sites

On ‎5‎/‎13‎/‎2017 at 5:46 PM, hartcoauto said:

Wow we are in a small town one hour from Louisville Kentucky at 65.00 per hour. When we moved here the very first comment was welcome to the Twilight Zone. No one here truly understands the cost of staying in business


Sent from my iPhone using Tapatalk

$105 is where I'm at. Gives me a 70.7% labor GP. I call around every year and check labor rates, just to make sure I'm not the cheapest or most expensive.  

Link to comment
Share on other sites

  • 2 weeks later...
On 5/13/2017 at 4:46 PM, hartcoauto said:

Wow we are in a small town one hour from Louisville Kentucky at 65.00 per hour. When we moved here the very first comment was welcome to the Twilight Zone. No one here truly understands the cost of staying in business


Sent from my iPhone using Tapatalk

I am in the same situation just in a different part of the country. But that is the best way to describe the situation...."no on here truly understands the cost of staying in business". When your biggest competition is the local junk yard "fixing" cars or the "shop" that will only install parts if the customer brings them with him, or the out of work neighbor who is a "mechanic",  it's a tough nut to crack. My stupidity for picking this location but the challenge has proven to be overwhelming and so hard. Needless to say, I am currently looking for other locations to move and intent on selling this building. Glad to see I'm not alone in the customer base I have gifted myself with.

Link to comment
Share on other sites

  • 1 month later...

When I bought my partner out a few years ago, he said it was time to raise our labor rate. Because I lost his customer base, and he was the expert mechanic, I was afraid to raise the rate. I worked my butt off and struggled. I finally got over my fear, and challenged by other shop owners I raised my rates. Nothing happened. So I raised them again. I don't recommend this, but I can tell you what I did and what happened. I ended up raising our labor rate from $89 to $125 in a period of 18 months. Nothing happened. Except I started being profitable. I know I am the highest labor rate in town. The shop across the street, a very good shop, is at $90, we're both very busy. The big difference between me and the owner across the street is that he's the main guy and can't leave, and I don't work in my shop in daily operations and have taken up to a month off at a time. I know this is not recommended, but I ended up not caring what any other shop in town did. I concentrated on giving great service. Besides, if any shop works towards a 60% GP you have to get it somewhere. There is less push back on labor rates (rarely comes up) than there is on parts pricing. 

BTW, I'm just sharing experience here. We've had lot's of issues to overcome. I found out last year that we were not charging nearly enough on parts compared to other shops, and getting that pricing correct has really helped our profitability. Also, we try to stay comparable by quoting an opening estimate for testing at $98. If we really get pinned down on labor rate we quote our average labor rate, which is 110-115, and we say it's our average rate. Not recommending thus stuff, just saying what we do.

Richard G

  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Have you checked out Joe's Latest Blog?

         5 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By carmcapriotto
      The Weekly Blitz is brought to you by our friends over at Shop Marketing Pros. If you want to take your shop to the next level, you need great marketing. Shop Marketing Pros does top-tier marketing for top-tier shops.
      Click here to learn more about Top Tier Marketing by Shop Marketing Pros and schedule a demo:https://shopmarketingpros.com/chris/
      Check out their podcast here: https://autorepairmarketing.captivate.fm/
      If you would like to join their private Facebook group go here: https://www.facebook.com/groups/autorepairmarketingmastermind
      In this podcast episode, Coach Chris Cotton from Auto Fix Auto Shop Coaching highlights the significance of always saying yes to customers in the auto repair industry. He recounts two examples where service advisors faced challenges in agreeing to customer requests. Cotton stresses the importance of customer satisfaction and the delicate balance of agreeing to customer demands without making unrealistic promises.
      Saying Yes to Customers (00:02:36) Importance of prioritizing customer satisfaction and finding ways to say yes instead of no.
      Handling Customer Requests (00:03:45) Addressing an instance where a service advisor struggled to manage customer expectations and deliver on promises.
      Customer Service Skills (00:05:54) Emphasizing the need to take care of the customer, manage expectations, and avoid overpromising while saying yes.
      Saying Yes and Managing Expectations (00:10:11) Discussing the importance of saying yes to customers while managing expectations and not overpromising.
      1. Importance of not saying no to customers in the auto repair business
      2. Instances of a service advisor struggling to say yes to customers
      3. Emphasizing the need to prioritize customer satisfaction
      4.Managing expectations while saying yes to customers
      5.Not overpromising to customers
      Quotes:
      Coach Chris Cotton', '00:06:54', "How would you like it if you were leaving town in 24 hours and somebody said, 'Oh, you can't take your car because we can't finish it up'? It's just not the right place to be in."
      'Coach Chris Cotton', '00:09:14', "The customer doesn't care about any of that; the customer just wants to know if you can help them or not."
      'Coach Chris Cotton', '00:12:16', "If they're in front of you unexpectedly, say yes, smile, and be like, 'Oh, I'm so glad, Mrs. Johnson, that you're here today. I haven't seen you in a while. Absolutely, we'll take care of your crisis for you.'"
       
      Connect with Chris:
       
      [email protected]
      Phone: 940.400.1008
      www.autoshopcoaching.com
      Facebook: https://www.facebook.com/
      AutoFixAutoShopCoachingYoutube: https://bit.ly/3ClX0ae
       
      #autofixautoshopcoaching #autofixbeautofixing #autoshopprofits #autoshopprofit #autoshopprofitsfirst #autoshopleadership #autoshopmanagement #autorepairshopcoaching #autorepairshopconsulting #autorepairshoptraining #autorepairshop #autorepair #serviceadvisor #serviceadvisorefficiency #autorepairshopmarketing #theweeklyblitz #autofix #shopmarketingpros #autofixautoshopcoachingbook
      Click to go to the Podcast on Remarkable Results Radio
    • By carmcapriotto
      Thanks to our Partner, NAPA Autotech napaautotech.com
      Matt Fanslow and Tanner Brandt discuss the nuances of automotive training and education. They emphasize the importance of selecting relevant classes that address specific areas of struggle within the industry, such as diagnosing parasitic battery drains. They highlight the complexities of troubleshooting and the limitations of current diagnostic tools, underscoring the need for better vehicle monitoring. The conversation also touches on the importance of networking and knowledge sharing, as well as the value of stepping out of one's comfort zone to explore new areas of learning at training events.
      Importance of selecting classes and getting the most out of training events in the automotive industry Choosing classes based on areas of struggle and seeking advice from experienced instructors Different phases of attending training events Value of soft skills and communication courses in the automotive industry Impact of quality training programs offered by NAPA Importance of ongoing training to keep up with evolving vehicle technology Importance of specialized training, particularly in the area of electric vehicles (EVs) Value of specialty classes focused on specific vehicle brands Importance of networking and staying engaged during training events Challenges faced in diagnosing automotive issues, particularly related to parasitic battery drains  
      Thanks to our Partner, NAPA Autotech napaautotech.com
       
      Email Matt: [email protected]
      Diagnosing the Aftermarket A - Z YouTube Channel HERE
      Aftermarket Radio Network: https://aftermarketradionetwork.com/
      Click to go to the Podcast on Remarkable Results Radio
    • By Changing The Industry
      Episode 152 - A Blueprint for Financial Independence in Auto Repair Shops with Rick White of 180Biz


  • Our Sponsors

×
×
  • Create New...