Quantcast
Jump to content


Gonzo

Article: Pikes Peak and the Rental - - Did ya ever wonder where a rental goes after it leaves the rental office?

Recommended Posts

Pikes Peak and the Rental

Anytime we are planning a long trip out of town we generally will rent a car. Not that I don’t have full confidence in our personal vehicles is just that if something would go wrong I know exactly who’s the lucky guy that’s got to fix it. Instead, I’d rather make a phone call to the rental agency and tell them to bring me another car. It always seemed a little strange to me that someone would purposely lend you a brand new car with nothing more than a driver license. But, they do it every day, and I doubt they really know what goes on with those rentals once they’re out of sight. I’ve heard of people renting a car and taking them to the track, or removing the engine and replacing it with something else. Me, well I didn’t go to that extreme, I just took my rental up to the summit of Pikes Peak.

The whole purpose of this trip was to take our son and all his belongings to college. It took a full size van this time, and it was loaded down with everything from clothes to his bike, as well as all the stuff we would need for the trip too. The University Of Denver was our destination, so with a full tank of gas, a couple of road snacks, the dogs at the kennel, and the GPS fired up we were on our way.


Being in the repair business of course I’ve got to check the car out myself. Even though it’s practically new I still had to poke around under the hood and chassis. The van wasn’t one of the high end models, just a basic van, but it would serve the purpose that we needed it for. But, with every trip like this, my wife will always ask if I have one of my pocket screwdrivers with me, and it’s not because she is thinking about any emergency repairs or something else that might go wrong that requires the use of the most versatile tool there ever was, no… that’s not the reason at all. She knows if I get bored I’ll start taking the car apart while she’s taking her turn driving down the highway. So, to keep the sanity in the family I’m not allowed to bring one.


The trip took about 11 hours from our house, mostly uneventful, other than I didn’t care too much for the cruise control. It seemed to vary way too much from the set speed before it would kick in. Not a big deal, but one of those things I’m sure at some point I’ll run across a customer who will have a complaint about one of these models doing just that. Most people probably wouldn’t notice it, but if they did, I don’t think there’s much I could do about it.


We arrived at the hotel with plenty of spare time on our hands, which was our plan in the first place. We have a daughter who lives in Boulder which is not that far away from the college and we definitely wanted to spend some time with her too. In the meantime the plan was to get up the next morning and check out some of the local sights. One in particular was Pikes Peak.


It wasn’t that far from the hotel so it seemed like a pretty good way to spend the afternoon. So, we headed to Pikes Peak with typical tourist interest and our fully loaded rental van. As we got closer to the mountain range the roads began to twist and turn even more than before. A few of them had some really blind turns and steep drop offs on the edges. The only comment from the wife was, “Boy, that’s a long way down.” Soon, we were at the large wood framed entrance to Pikes Peak. The signs said that there wasn’t any snow fall problems or issues that should concern anyone that wanted to drive to the top, so … we did just that.

The park ranger gave us some information about the two to three hour drive we were about to undertake, and about the many switch back roads and very tight turns there are. It all sounded like a casual drive into the mountains to me. Thus, are journey began. At first it was just a winding roadway with a gradual slope, but that was all about to change. The ranger did remind me to keep it in 2nd or 1st gear most of the way, and before long I found out why. The road became even more twisty and steeper than I thought was even possible to get an asphalt paver to negotiate. Most of the switch backs changed grade right in the center of the curve and there are hardly any guard rails on any of the steep drop offs. The edge of the road just disappears down steep canyon walls. I’m not too sure the engineers of this rental ever thought of using Pikes Peak as part of their testing, but onward and upward we went.

As we neared the tree line I could see up to the next set of switch backs that there was one car that didn’t make it to the top. A roll back wrecker was coming down from the summit with a VW Vanagon strapped down to the bed. As the driver negotiated the next set of switch backs the entire wrecker would lean out over the 10,000 foot drop off that was just off the edge of the pavement. I did my best to give him as much room as possible as the wife leaned towards the center of the van terrified that the next inch of ground that I used to get closer to the edge was going to be her last. I firmly believe this guy has to be the bravest tow driver I’ve ever run across, because there’s no way I would have ever tried that.

The rental van was getting a bit warm, not bad yet, but holding it down a gear or so and keeping the revs up wasn’t helping. But, we didn’t have much farther to go. With one last turn and one more switch back we made it to the summit. The overloaded rental could take a break while we did the tourist thing. You know, look over the edge, by a few souvenirs, and stand in front of the large stone sign while having our picture taken.

Going down was going to take a whole lot more care than going up ever did. As we made the turn to the first switch back from the parking lot there was a small pickup trying to tow another small pickup up to the summit with nothing more than a web strap. Now you have to image, you’re at better than 14 thousand feet, you’re on a road with no guard rails and a drop off well past 10 thousand feet and you’re using nothing more than a tow strap. If it broke, you’re going straight down to oblivion. And, I thought I was crazy taking a rental to the top. This has got that beat.

At about half way down there is a mandatory check point. The park rangers pull out a temp. gun and check your brake rotor temperature. Sure enough, our brakes were at about 450 degrees, and they won’t allow you to continue down until they’re below 300. So we stopped at the check point for about an hour to allow the brakes to cool down. Not that I was surprised at all, a fully loaded van, going down an 11 mile 7 percent grade what did ya expect? Oh, and yes… the rotors all had this nice shade of blue.

Needless to say, we made it to the bottom without any incidences, other than the wife leaving a death grip embedded in the passenger side grab handle. I did have a chance to ask one of the park rangers if anyone every fails to negotiate one of those curves up there on the mountain, he said, “Yes, usually about 5 a year. Sometimes we might have to rescue one of the racers that go up when we hold the rally too.” The entire trip takes well over 2 hours of slow and steady driving, although the racers… they make it to the top in about 10 minutes.

The trip home had even more surprises for us. As we came through Kansas we ran smack into a huge hail storm. Huge chunks of hail were pelting the car like a sledge hammer. It got so bad we stopped at a restaurant to wait out the storm. Things were blowing all around us and even the restaurant lost power for a moment. After the storm passed I checked the rental out and not a dent could be found. Lucky to say the least, but we still had a long way to go.

We turned the rental back in when we made it home, and of course, I didn’t mention a thing about Pikes Peak or the hail storm, or about the cruise control. I was just happy to have made it home in one piece. Needless to say, if this car could talk, what a story it could tell.


So, if you’re ever wondering whether or not buying a used rental car is a good idea, well for the most part, they probably are but, you might want to have it checked out first, cause… ya never know where one of them might have been.

Click here to view the article

  • Like 2

Share this post


Link to post
Share on other sites



  • Similar Forum Topics

    • Seeking/open to Partnership for Repair Shop Planning

      Hey All, My name is Karla, I had previously owned a 3-bay mechanical repair shop in Burlington, VT for 6 years and built it to maintain an outstanding reputation and provide a comfortable income. I had the opportunity to sell my half of the business and finalized that deal this past fall. I have worked in all areas of the auto repair industry over the past 15 years, graduated from a two-year ASE certified auto tech program and went on to earn my Bachelor’s in business and a masters degree in executive leadership.  I have some capital I will be contributing to the planning and opening of a new shop and am very open to meeting potential partners/investors in all areas of the country. I greatly look forward to building something new in a location new to me. Anyway, I’d like to welcome all /any interest and to answer any questions about joining forces in shop planning and management. Please do not hesitate to contact me, thanks for considering! —Karla

      By KDshopNEA, in Automotive Business Opportunities

      • 2 replies
      • 352 views
    • Repairs on your own vehicles

      Wondering how you all handle repair work to your own vehicles. How do you pay, how do you handle parts costs, write an RO or not, how does it affect gross sales. I currently write an RO, pay the guys time just like any other job, but cost the parts to myself. The RO is for zero sales but has tech time charged to it. Wondering how others do it. I also have too many vehicles...

      By gandgautorepair, in General Automotive Discussion

      • 8 replies
      • 789 views
    • Article: Ouija Board Diagnostics - You're doing it wrong if your Ouija board is your go to diagnostic tool

      Ouija Board Diagnostics I’ve often wondered why a lot of the driving public believes auto repair is something for non-thinking Neanderthals that have no ambition to do anything else in life.  For all I know they think we (us mechanics that is) diagnose every problem by breaking out a Ouija board, while humming some ancient automotive chant. It could also be that a good mechanic just makes things look easy to the unaware and uniformed layman. With the right mechanic the whole thing can seem effortless, easy, and somewhat second nature when it comes to diagnosing a problem. To the armchair mechanic sitting at home watching the next new automotive reality show, it’s either – “Repairs are a no-brainer, I can do that”, or it must be some sort of Ouija board magic.  Mind you, the number of individuals who still believe anyone can be a mechanic is dwindling ever so slowly.  Mainly because the car itself has gone past the point of parts swapping and a shade tree mechanic’s ability to repair the modern car.  It’s no secret good old dad with the typical box of tools from a discount chain store can hardly change a spark plug anymore, let alone find them. Oh sure, you can still do a pad slap at home, and you can probably toss on a set of shocks, replace a bulb or two, but diagnosing a problem, especially one that involves some form of electronics… well… that’s a whole new issue to deal with. It could be they need to master the Ouija board diagnostic scenario, or they need another round of You Tube videos.  Every mechanic has undoubtedly heard the same thing from a well-seasoned You Tuber, “Oh I could have done that.” This usually leads to an even longer explanation of how you’ve done the entire repair wrong, but put the tools in their hands, and the results are pretty consistent.  The car is either incorrectly put together, or they’ve lost some parts between point A and point B. Videos are great, but you still need to have some mechanical dexterity. A good example of this scenario is when I was teaching a brake shoe replacement class the other day.  After explaining the type of brake system we were working on, I removed the brake shoes from the car.  Next, I reinstalled the same shoes, slowing down just enough so they could see how to use the brake tools. It probably took all of 20 minutes to explain it in detail and install the shoes. All the heads were bobbing and the usual consensus was they all had this repair procedure down pat, because, as we all know, anybody can do brakes.  Well, as if it was no surprise, when the students got their hands into the job all I heard was one cuss word after another and the occasional student chasing a bouncing spring or clip across the shop floor. So much for easy, aye? So, where do most of these unprofessional type mechanics and couch connoisseurs of the automotive world go for any information?  Where else, the internet. The one place that doesn’t check the credentials of the person making the video, and the one place where anyone with a box of tools can be a superstar with a wrench. In their video they’re the automotive expert, camera man, sound man, director of content, and editor all at the same time.  No need in researching the facts, looking up the proper methods, or any other various procedures, service bulletins, or the latest tools related to that particular job. I wouldn’t be surprised if there’s a video out there with a couple of guys surrounding one of those Ouija boards asking why the short fuel trim is higher on one of side than the other. Ouija board or not, there are a few draw backs to internet information, but there really are a lot of super fantastic guys and gals putting out some very helpful videos on car repair.  It’s just the few home brewed videos that make me cringe. Some of these back yard magicians seem to consult their Ouija board way too often. As if they conjured up some miracle answer right on the spot. Honestly, some of these videos are about as reliable as fake news. But, then again… that’s what some people think the professional mechanic does every day. As there has always been, and there will always be, a shortage of trained technicians out there able to handle the job of repairing the modern car.  I’m very sure we will never see the day when there is an overabundance of good mechanics who have to change careers because there is no room for them under the hood.  It’s never going to happen. What does need to happen is the one thing consumers don’t want, and that’s cost of repairs most certainly need to rise, as well as the mechanics’ wages to keep up with all of these technical advancements. It’s not a maybe, it’s a must or the technology will run right past you.  Ask any mechanic what they learned on a vehicle from 10 years ago vs. today’s cars, and you’ll find that nearly half of what they did back then isn’t applicable in today’s diagnostic procedures. To be a good technician these days takes a lot of training, a lot of time spent reading, and understanding the latest technologies. New information comes from the manufacturers’ engineering departments just as fast as the cars come off the assembly lines, and to stay on top of things you need to study. I’ve heard people tell me, “Yea, I went to an automotive tech school to be a mechanic, but I didn’t learn anything.”  Seriously?  I’m sure you learned a whole lot.  The problem isn’t the school training, the problem is you.  Training doesn’t stop with your diploma, it stops when you stop wanting to advance your knowledge in the repair industry. School is a starting point, but to be a modern mechanic means you need to stay focused on the technology, take advanced training classes in your field of choice, and not expect answers from a You Tube video or your Ouija board. There’s a lot to learn and retain.  It’s not a trade where you learn one method and expect that skill to last you throughout your career.  It’s an ever changing industry with ever changing technology. Learn the basics, then learn to diagnose the modern car.  You can’t guess at a solution or consult that old Ouija board for the answers.  It takes practice and a lot of hands on from a dedicated individual willing to get their hands dirty and diagnose an automotive problem.  Then solve it correctly. Sorry, no Ouija board diagnostics allowed.   
      View full article

      By Gonzo, in AutoShopOwner Articles

      • 4 replies
      • 346 views
    • Article: Where's That Machine? --- You know, the one that tells you what's wrong with the car.

      Where’s That Machine?          Even in this age of electronic gadgets, voice recognition systems, and cell phones, there are still a few things that require the dexterity of a human being. For some skilled and unskilled jobs the physical work or mental intuitiveness hasn’t been entirely replaced by machines, microprocessors and LED’s, just yet. Automotive diagnostics and repair is one of those fields. The modern mechanic is still very much a part of the repair equation. But, go to any repair shop in this country, and you’ll probably hear somebody at the service counter ask the service writer, “You guys do have one of those machines that tells you what’s wrong, don’t ya?”          Yeah, we have one of those machines. It’s that guy in the service bay leaning over your car right now.  You know, the mechanic. Oh, you know who they are. They’re usually the guy you spot in the elevator or at the supermarket who has more than a few grease spots on his clothes, scuffed up shoes, a pocket screwdriver, rough calloused hands, and wearing a shirt with his own name on it. He’s generally not a college graduate, probably doesn’t know the difference between Harvard and Yale, and probably doesn’t care either, but intelligent just the same. Yes, a machine all right. A walking, talking, hardworking, diagnostic and mechanically inclined individual who uses tools and equipment to solve your car problems.            Look how the tools of the modern mechanic have changed over the years, such as scanners and meters. They are an aide, a machine, a tool if you will, but they don’t give out answers. Although, these tools can do so much in the way of diagnosing a problem in the hands of an expert mechanic. They show the technician a code or information in regards to the internal aspects of the vehicle. Code numbers and definitions are a strategic direction for the repair. This allows a trained technician to know which pathway to take in making the repair. To put it in other words: the real machine that finds out what’s wrong with your car is those two hands and brain of the very guy with his name imprinted on his shirt. Not some box of transistors and relays, but people still ask about and believe there is this magical mystery machine that does all the work.          The automotive field isn’t what those reality TV shows portray it to be, either.  Most of these shows highlight the automotive industry as a place for stupid, filthy, disorganized-knuckle dragging fools who can’t read or write, and wouldn't know a dentist office if they stumbled in one. It’s just one more reason why it’s so hard to find sharp, young talent to take up the trade. Car technology changes so fast these knuckle draggers can’t keep up with the true professional mechanic field and what goes on in a real repair facility, but for some reason somebody at these networks think reality shows of guys taking old non-computerized cars apart is what we want to watch on television. I for one would rather watch something useful like reflashing a GM than what it takes to weld in a new quarter panel. You want to get the next generation interested in the field…show em’ something of interest in the way of a modern computer driven vehicle. The vast number of computer systems, hydraulics, electrical, radar/navigation systems and mechanical aspects of the modern car are constantly changing. This means continual education is a must for the professional mechanic. A modern mechanic is more like a surgeon than a brick layer is to one.  Even though both are considered laborer trades, one is more artistic in nature while the other is more technology driven. For some people, the mere thought that somebody out there knows more about their car than they do is quite disturbing to them.  They seem to think they are far more intelligent than the engineers, designers, and the mechanics combined. In their interpretation of the automotive repair world, the mechanic has to be an idiot to even think they can make a living fixing this stuff when it’s just as easy to fix it yourself at home in the garage. I’ve been told more than once by an irate customer that it doesn’t take a rocket scientist to fix a car, so it shouldn’t cost that much. So, why would these types of people even want to talk with this guy who has his name tattooed on his shirt? Why not bypass him altogether and go right to the mechanized technical wonder they can’t seem to find at the local part store.  You know, that machine.  That thing-a-mabob that tells those dimwitted Neanderthal mechanics what part to change and how to make their car all better. As far as they are concerned, diagnostics are not needed, because following a path laid out in a diagnostic chart isn’t a skill that’s required when making a repair.  Just read the results on the scanner, order the part, stick it on, and then get back to their own lives with as little interruption as possible. All they want to pay for is what they consider the main reason for going to the mechanic in the first place.  You know, let them get greasy, change some widget and make their car run like new without costing them a fortune, and if it doesn’t… blame the mechanic, and not that dime store diagnostic machine they relied on. Where the idea of a machine that can answer every type of automotive problem by simply plugging it into the car is beyond me. I suppose, some of it comes from growing up with the TV and watching sci-fi shows, but reality doesn’t come across as real with a portion of the driving public. They’re still stuck with the notion that Mr. Spock will break out his Tri-corder and inform them about the composition of material making up their engine block, and the exact cause of their engine misfire. Seriously people, get a grip on reality. The idea that this perfect machine actually exists is simply absurd, but the mystery of it all still lingers in the minds of those tried and true believers of all this technical wizardry of which they don’t understand. In their minds that “machine” is real, and any mechanic that doesn’t know about one is a fool. In the near future, even this mythical, magical machine may actually be more fiction than myth.  Telematics and remote diagnostics may make the vision of a “one machine can fix-all” far more real than we can imagine.  Not that I believe there really will be a “fix-all” machine capable of re-gapping a worn out spark plug, but I do believe a lot of systems will be diagnosed, and possibly electronically repaired by remote intervention.  Although, those tough diagnostics that can’t be sorted out will still require the skill of a good diagnostic mechanic to accomplish them. Maintenance and wearable item repairs will most likely be the commonplace activities at a repair shop in the future.  Needless to say, the days of a home mechanic with a set of tools picked up at a garage sale may soon be a thing of the past or left up to the hobbyist working on antique vehicles.  The modern technically advanced vehicle of the future may become too far advanced for anyone except for the skilled mechanic.  We may be in a technically advanced computer age, and there’s no doubt there are further advancements to be made, but the trained mechanic is still a big part of the future. So, the next time someone asks, “Where’s that machine?” tell them it’s where it’s always been, in the service bay, and you’ve been talking to it all this time… your mechanic.           
      View full article

      By Gonzo, in AutoShopOwner Articles

      • 3 replies
      • 319 views
    • Help needed. If I'm wrong, I need to be corrected ASAP

      I released a video on my blog yesterday that seems to be causing a bit of a stir. Some shop owners are saying my idea is brilliant - others say I'm totally wrong. In a nutshell, I'm advocating giving away $100 in services for a new client referral. The last thing I want to do is give away bad information, so I'm asking for some help to set me straight if I'm way off base. You can watch the video here for my full explaination: http://www.captaincarcount.com/auto-repair-marketing/is-this-a-crazy-idea-or-what/

      By Ron Ipach, in Auto Repair Shop Management Help? Post Here!

        
      • 7 replies
      • 1,151 views
  • AutoShopOwner Sponsors



×