Quantcast
Jump to content


    • You can post now and register later. Already registered? sign in now to post with your account.
    • ×   Pasted as rich text.   Paste as plain text instead

        Only 75 emoji are allowed.

      ×   Your link has been automatically embedded.   Display as a link instead

      ×   Your previous content has been restored.   Clear editor

      ×   You cannot paste images directly. Upload or insert images from URL.


      Once you submit your question, a new topic will be created for you in our forums. Our moderators may move your topic to a more suitable forum category if one exists. Members will see your topic and be able to respond to your question.

    • This will not be shown to other users.
marista

New part failure and labor issues

Recommended Posts

Anyone else experiencing a high number of new part fails? We have fails across the board, sensors, window motors, electrical (starter, alternator) and untold number of squeaky brakes. We use ceramic almost exclusively unless it's a cost factor for customers, do new rotors 98% of the time and it doesn't matter which vendor I purchase from - I get a large number of complaints from customers that the brakes are squeaking sometimes in as little as 1 month.?!?!?

Brakes are installed properly and greased appropriately.

 

Some weeks we feel like all were are working on are re-dos.

 

In the past, we haven't charged customer for part failures. It's not our fault, but it's certainly not theirs. Big labor jobs would get a labor claim sent into vendor. We hardly ever see anything close to full reimbursement if we see anything at all.

 

After the last few months, partner I decided customers need to pay labor at 50% reduced rate. Again, not their fault - but not ours either. We can't keep doing this without getting paid something for our time. Thinking of adding disclaimer on invoice stating this policy.

We feel for the customer, but we can't keep doing them for nothing with such a high rate of failures.

 

Just wondering if anyone else is running into this problem and how you are handling it?

 

 

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Elite Worldwide Inc.
      Elite's AMI accredited Online High Impact Course, sponsored by Jasper Engines & Transmissions, starts October 16th!
      This industry acclaimed online service advisor training course is delivered by 2019 Ratchet & Wrench All-Star Award winner Jen Monclus, and has been proven to generate both happier customers and higher sales.
      Here are a few of the topics that will be covered:
      - Selling multiple repairs & big ticket items
      - Selling diagnostic testing & maintenance
      - Building powerful relationships in 60 seconds
      - Overcoming the most challenging sales objections
      - Generating more repeat and referral business
      - Presenting service recommendations in a way that makes customers want to buy
      - Note: Course will come with a workbook, homework assignments and testing to ensure accountability and lasting results
      It's only $179 to enroll, and seating is limited, so call 800-204-3548 or visit our Online High Impact page to secure your advisor's spot today!
    • By autoguy
      Just getting an idea of what everyone is using for TPMS tools and sensors these days, anything new?  
    • By tco
      Accepting Credit Cards at 0% cost 
      Credit card fees for merchants have drastically gone up in recent years, especially for reward card purchases, making credit card fees one of businesses largest expenses.  Interchange fees for reward cards have gone up by 24% in a recent 4-year period. The highest reward card fees to a merchant are now around 3% of the transaction total (not including what the markup from whomever sold you their credit card processing).  Many people have probably seen Samuel L. Jackson TV commercials promoting Capital One’s Quick Silver credit card, paraquoting, “The Quick Silver credit card will give you 1.5% cash back on all of your purchases.” Who do you think is actually giving these customers 1.5% of their cash back on their credit card purchases?  You guessed it- you, the merchant.
      What’s a business owner to do?
      Do nothing Raise the products or services prices to account for higher credit card fees Offer a cash discount Don’t accept credit cards Or, provide your customer a choice when they pay with a card to pay a surcharge or not- 0% credit card costs to the merchant All of these options have their pluses and minuses, but with the ever higher and higher fees credit cards are charging to merchants, there are other methods where technology and consumer choice can help mitigate these fees.
      0% credit card cost is relatively new legal method of accepting card payments in the US.  The credit card companies fought to not allow consumers a choice to pay a surcharge with credit card or zero fees with a debit card.  The credit card companies make much less money with a debit card opposed to a credit card... This case went all the way to the US Supreme Court this decade.  The credit card companies lost and consumers being able to choose to pay a surcharge with a credit card or zero fees with a debit card is now legal in 45 states.  The remainder of the 5 states will likely be joining the other 45 states in the near future as there are still ongoing court proceedings.
      The US is now following the Australian model which has been allowing merchants to surcharge since 2003.  Currently, 42% of all merchants in Australia pass on a surcharge to customers who use a credit card.
      Here’s an option that you might not know about, until now:
      When your consumer decides to pay with a card, they have two options.  If they use a credit card, a small fee will be charged to their card. If they use a debit card, there will be no fee to the consumer.  Our software does all the work and explains to the customer of their choice prior to the charge being authorized.
      What exactly are the costs to the merchant and to the consumer?
      For credit cards: Merchant pays zero credit card fees, the consumer pays 3.5% of the transaction amount
      For debit cards:  Merchant pays 1% + $0.25/authorization, the consumer pays Zero fees
      Facts:
      A card swiper is not needed: credit card information can be typed in a phone, computer over the phone and in-person.  A 'brick' card swiper/dipper is available if needed.
      Works with online sales/invoices
      Simple application process, no upfront cost, no term contract, no cancellation fee and complies with all credit card rules and regulations
      If you auto batch by 8:00 PM EST, you get your money the next day
      Up-and-running within a week
       Benefits to the Merchant:
      Being fair to your consumer by offering them a choice to pay a fee or not, while eliminating your credit card fees, which can be up to 3% of your total credit card sales.
      Simple to use and all charges are viewable through real-time online portal.  
      Support: our team is there when you need us, but it truly is very straight forward.
      We realize this solution is not for everyone.  But, you now have the opportunity to no longer pay credit card fees, forever.  Reach out through ASO or here if you are interested in discussing further: https://www.lomasolutions.com/contact

      View full article
    • By tco
      Loma Solutions represents a 0% credit card fee solution.   We have 1000's of customers in the US and our solution makes auto shop owners thousands of extra dollars every year.

      How does 0% processing work?
      When your customer decides to pay with a card, they have 2 options.  If they use a credit card, a small percentage of the transaction will be charged to their card.  If they use a debit card, there will be no fee to the customer.  Our software does all the work and explains to the customer of their choice prior to the card being authorized.

      What exactly are the costs to the merchant and to the customer?
      For credit cards: Merchant pays zero credit card fees, the customer pays 3.5% of the transaction
      For debit cards:  Merchant pays 1% + $0.25/authorization, the customer pays 0 fees

      Facts:
      - A card swiper is not needed: credit card information can be typed in a phone, computer or over the phone.  There is a 'brick' card swiper if needed*
      - No set-up costs or any other fees
      - Our agreement is month-to-month
      - If you auto batch by 8:00 PM EST, you get your money the next day
      - The solution complies with all card rules and regulations
      - We'll have you up-and-running within a week

      Benefits to the Merchant:
      *** You are being fair to your customer by offering them a choice to pay a fee or not, while you are eliminating your credit card fees, which can be up to 2.5% of your total card sales.
      - Simple to use and all charges are viewable through our real-time online portal.  
      - Support: our team is there when you need us.  We will show you and anyone on your team how to use the solution, but it’s very straight forward.
       
      Making you more money!
      If your current credit card fees are 2.5% of your total card sales, for every $50,000 in credit card transactions, you'll put an extra $1,250 in your pocket.
      * we will provide you with a ‘brick’ terminal: $35/month if needed.  This includes free paper re-supplies.
        Reach out if you'd like to discuss.
    • By Joe Marconi
      I can't tell you how frustrating it is to give a price on a radiator to a customer at the service counter, while he's on his phone searching for the part!  
      Here's what I do when I get a customer that tell me he can get the part cheaper....I agree with him!
      I let him know that he can get the part cheaper, just like he can buy a steak and potatoes cheaper at the super market too.  But he'll pay more for the steak and potatoes at a restaurant. 
      And then in a calm manner, I review all the benefits of me suppling the part, the warranty and the fact that if the part is wrong or defective or fails in the future, he will have no recourse and will have to pay to have done all again. 
      For most, it works. For many it's all about price.
      Now Most IMPORTANT IS THIS: The reason why you don't mind spending more for a steak at a restaurant is because of the experience. So, make sure the customer experience clearly demonstrates the value of why people need to do business with you. When Value goes up, price becomes less of an issue.
      Hope this helps. Let's hear from you on this frustrating topic! 
       
       


  • AutoShopOwner Sponsors



×
×
  • Create New...