Quantcast
Jump to content

Parts store ownership


Recommended Posts

Hey guys, looking for some advice if you can give any. I have an opertunity to buy a napa parts store and a carquest both guys are ready to retire. I already have a 3 bay shop with 3 full time guys plus my self.

What i am wanting to know is there any other shop owners out there that also have a parts store plus a shop? if so is it worth it or more of a head ache? Any profit in? do the other shops around your town buy from you? I havent got to see either guys year end numbers. I have got them to give me numbers and looks like with out there buildings and looks to be about $250K worth of inventory.

Link to comment
Share on other sites

I'm curious to see what others say about this.

I'm a Parts Tech by trade (I'm from Canada, you guys don't recognize Parts being a trade in the US) and I have a federal certification.

Part of the in class training is learning how to run a parts store (it's basically a compressed business management course).

I could go on for hours about things like profit margins, inventory control and marketing (not the same as advertising).

 

The main things I'd be looking at are:

- The gross and net profits over the last few years (GPM for a part store should be ~30% or you'll go broke)

- Average turnover and how much dead or low turning inventory they have

- How much space you would be getting (whether there's too much or too little space, there's usually too little)

- How does the supplier upchain take care of their stores (Give you room to make good profits vs list while still being competitive, good return policies for obsolete/dead stock, having a good warehouse network to get parts to you quickly etc)

- How extensive is your trade customer base (your bread and butter, the guys who will call on you daily)

 

There's more but this is just off the top of my head. It's no small undertaking, but it could (and probably should) easily be more profitable then your 3 bay shop.

Link to comment
Share on other sites

A couple of quick tests to determine the viability of a business:

Current ratio = Current assets / current liabilities (this should be at least 2.0 in a healthy business)

 

Acid test ratio (quick ratio) = Quick assets / total liabilities (this should be at least 1.0)

Quick assets are cash + accounts receivable + notes receivable + other liquid securities (basically anything that can quickly be converted to cash in hand)

 

Equity to liabilities ratio = owners equity / total liabilities (higher is better)

 

Gross Turnover = Total cost of sales for 1 year / average monthly inventory for same period (jobbers should be 4.5-7.5, you should shoot for 6.0)

To find avg monthly inventory, add the inventory on the same day of each month together, then divide by 12

Link to comment
Share on other sites

I'm curious to see what others say about this.

I'm a Parts Tech by trade (I'm from Canada, you guys don't recognize Parts being a trade in the US) and I have a federal certification.

Part of the in class training is learning how to run a parts store (it's basically a compressed business management course).

I could go on for hours about things like profit margins, inventory control and marketing (not the same as advertising).

 

The main things I'd be looking at are:

- The gross and net profits over the last few years (GPM for a part store should be ~30% or you'll go broke)

- Average turnover and how much dead or low turning inventory they have

- How much space you would be getting (whether there's too much or too little space, there's usually too little)

- How does the supplier upchain take care of their stores (Give you room to make good profits vs list while still being competitive, good return policies for obsolete/dead stock, having a good warehouse network to get parts to you quickly etc)

- How extensive is your trade customer base (your bread and butter, the guys who will call on you daily)

 

There's more but this is just off the top of my head. It's no small undertaking, but it could (and probably should) easily be more profitable then your 3 bay shop.

 

 

The main things I'd be looking at are:

- The gross and net profits over the last few years (GPM for a part store should be ~30% or you'll go broke)

Comercial shops they are %30 mark up Cash Customers are %40

- Average turnover and how much dead or low turning inventory they have

Very good question i will have to ask them that one

- How much space you would be getting (whether there's too much or too little space, there's usually too little)

There is never enough spaces

- How does the supplier upchain take care of their stores (Give you room to make good profits vs list while still being competitive, good return policies for obsolete/dead stock, having a good warehouse network to get parts to you quickly etc)

I Know carquest does take care of them and does have a good return policy

- How extensive is your trade customer base (your bread and butter, the guys who will call on you daily)

Napa has more of the commerical shops in the area which is about 5 in this small town

 

There's more but this is just off the top of my head. It's no small undertaking, but it could (and probably should) easily be more profitable then your 3 bay shop. We are both doing about the same numbers right now. Parts store did 500K last year in sales and i fell 10K short of that mark so close in sales but expenses add up quicker in the shop so i would say he makes 15 to 20k more a year

 

Thank You for your info and replaying to my post I am waiting on Napa to see what there numbers are. And i also know neither on of the stores push stuff as hard as they should.

Link to comment
Share on other sites

The parts stores near me that do the best never say no. One store only sells at a 50% profit. Take it or leave it. Another store strives for 50% but they will always sell a part unless its at a loss. They do better. I'd rather gross 300k a month at 30% than 100k a month at 50%. Its not like a shop that only has so many labor hours a month to maximize, the amount of parts handed over a counter is really unlimited.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Have you checked out Joe's Latest Blog?

         5 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Changing The Industry
      Enhancing Shop Operations with John Heller of PartsTech
    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Changing The Industry
      The Basics of Owning An Auto Repair Shop - Part 5
    • By carmcapriotto
      The Weekly Blitz is brought to you by our friends over at Shop Marketing Pros. If you want to take your shop to the next level, you need great marketing. Shop Marketing Pros does top-tier marketing for top-tier shops.
      Click here to learn more about Top Tier Marketing by Shop Marketing Pros and schedule a demo:https://shopmarketingpros.com/chris/
      Check out their podcast here: https://autorepairmarketing.captivate.fm/
      If you would like to join their private Facebook group go here: https://www.facebook.com/groups/autorepairmarketingmastermind
      In this episode, Chris Cotton from Auto Fix Auto Shop Coaching explores the issue of transition leaks in auto repair shops. He explains how frequent task-switching hampers productivity and energy levels for shop owners, service advisors, and technicians. Chris advocates for batch processing to consolidate similar tasks, thereby reducing transition leaks and increasing efficiency. He advises reorganizing work schedules to minimize cognitive load and suggests that while flexibility is necessary, intentional planning can greatly enhance productivity. The episode wraps up with Chris encouraging listeners to embrace growth and efficiency, thanking the sponsor, and promoting a positive work ethic.
       
      Transition Leaks (00:00:06) Explanation of the concept and its impact on auto repair shop owners, service advisors, and technicians.
       
      Impact on Efficiency (00:02:27) Discussion on how transition leaks lead to lost efficiency and diminished capacity for delivering high-quality service.
       
      Batch Processing Strategy (00:04:48) Explanation of the batch processing strategy to combat transition leaks and improve productivity.
       
      Applying the Concept (00:07:03) Guidance on analyzing and reorganizing schedules to minimize transition leaks and increase efficiency.
       
      Embracing Change (00:09:11) Encouragement to prioritize efficiency and quality by embracing a new way of organizing work schedules.
       
      Connect with Chris:
       
      [email protected]
      Phone: 940.400.1008
      www.autoshopcoaching.com
      Facebook: https://www.facebook.com/
      AutoFixAutoShopCoachingYoutube: https://bit.ly/3ClX0ae
       
      #autofixautoshopcoaching #autofixbeautofixing #autoshopprofits #autoshopprofit #autoshopprofitsfirst #autoshopleadership #autoshopmanagement #autorepairshopcoaching #autorepairshopconsulting #autorepairshoptraining #autorepairshop #autorepair #serviceadvisor #serviceadvisorefficiency #autorepairshopmarketing #theweeklyblitz #autofix #shopmarketingpros
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors



×
×
  • Create New...