Quantcast
Jump to content

Differential Fluid Exchange - What tool are you using?


Recommended Posts

I'm looking for some kind of electric or pneumatic machine that will pump gear oil into differentials as well as fill up transfer cases and transmissions that have to be filled from underneath. Ideally, it would have a small reservoir that could be easily cleaned to switch between fluids and would have a small pump to pump the fluid up and into the diff/TC/Trans.

 

I've looked at some different fluid exchange machines - BG has a differential machine that might do the trick, and I've looked a couple of similar machines online. The problem I'm running into with the machines I've found are that the reservoirs are very large and aren't easily removed for cleaning. I would like to be able to fill up a differential with 75w-140 and then quickly clean the reservoir and use the same machine to put AutoTrak II into the transfer case.

 

Anybody have any experience with this or know of a good piece of equipment?

 

Thanks in advance.

Link to comment
Share on other sites










Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Have you checked out Joe's Latest Blog?

         2 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Hands On
      Hi folks. A quick search and I did not see any recent alignment machine posts. I have a quote from Hunter, $86,000 includes a scissor life and the concrete work to flush mount it, shipping, the machine with wall mount cameras. Some accessories. If I do conservatively 3 alignments a week my break even is approx 4.5 years, a bit longer depending on financing cost.
      I lease my shop, and one of my biggest fears has been getting kicked out of here. Should I be looking at obtaining a location instead? I am always nervous about taking on the massive cost of a bigger building, especially when I struggle so often to hire good people. I talked to a friend that went from a small shop like I have to a larger facility and he said it was a lot more headaches with very little increase in income. I want less headaches, less stress.
       
      Maybe it is my small shop that makes it hard to hire? Is this the right time to try to get a new location? How do I even start finding financing, I do not have a ton of cash saved up right now. Should I get the alignment machine now, and continue to save up for a new location? How much do I need down for a new spot? Should I keep my eye open for other shops that might fail in the coming year and hold off on the alignment machine and continue to stack cash? I am kind of tired of loosing an employee for 30 minutes to an hour to run an alignment across town that may or may not get done to the same quality standards I hold my employees to.
    • By carmcapriotto
      Recorded at MACS (Mobile Air Climate Systems) 2024 Training Event & Trade Show, Frank Woodson from Gates discusses the importance of proper vehicle maintenance, focusing on water pump failures and electrolysis in cooling systems. Frank explains that 70-72% of water pump failures are due to weep leaks from seal failure, often caused by neglected coolant. The episode highlights the significance of thorough diagnostics and maintenance to avoid unnecessary repairs and ensure vehicle reliability. Frank Woodson, Training Manager, North America Aftermarket, Gates Corporation  Show Notes
      Bobby Bassett's Influence (00:01:08) The impact of Bobby Bassett, a former trainer, on the decision to focus on water pumps and the importance of his episode. Understanding Water Pump Failures (00:02:12) The discussion revolves around Bobby Bassett's foresight and the importance of understanding coolant and water pump failures. Preventing Water Pump Comebacks (00:05:46) The potential to prevent water pump comebacks through proper maintenance and the significance of addressing weep leaks and contamination. Water Pump Warranty Sort (00:08:40) Insights into the process of conducting water pump warranty sorts and the significance of analyzing water pump failures. Challenges in Implementing Preventative Measures (00:10:10) The challenges and complexities in educating the industry about the importance of preventative measures for water pump maintenance. Advancements in Hydraulic Hoses (00:12:47) Discussions about new sealing types and hose technologies, including the introduction of unique designs for hydraulic applications. Serpentine Belt System and Alignment Tests (00:13:43) The significance of the serpentine belt system and the use of alignment tests, such as the spray bottle test, to diagnose issues. Teaching about Hydraulics (00:16:16) The satisfaction of teaching and discussing the impact of the serpentine belt system and hydraulics on automotive components. Electrolysis in Cooling Systems (00:17:05) Conversations about the prevalence of electrolysis in cooling systems and the importance of diagnosing and addressing it effectively. Leak source and troubleshooting (00:18:25) Exploring potential sources of leaks and the importance of addressing ground issues and dirty coolant in electrolysis troubleshooting. Signs of electrolysis and pump seal failure (00:19:07) Recognizing signs of electrolysis in water pumps and the impact on pump seal failure.
      Thanks to our Partner, NAPA Auto Care Learn more about NAPA Auto Care and the benefits of being part of the NAPA family by visiting https://www.napaonline.com/en/auto-care Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections    
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors










×
×
  • Create New...