Quantcast
Jump to content

An Average Day - We all have our comfort zones


Gonzo

Recommended Posts

An Average Day

 

My average day begins with the usual commute to work, the obligatory coffee, and the turn of the key to the front door of the shop. Unlock the overheads, do any morning paper work I have waiting, and get the day started. Monday through Friday it’s the same routine. Occasionally I’ll come in early or stay later than normal, but for the most part every working day has the same general routine, one day to the next, each month, and each year it all seems to roll on and on. Same front door key, same route to work, and usually the same brand of coffee.

 

When there is a chance to change things up it’s a welcome relief from the usual pace of things. For me, being under the dash or under the hood of the modern car is my comfort zone, and it sure doesn’t hurt for me to get out of my comfort zone from time to time. And, like a lot of people on the go day in and day out, that daily grind can turn into a snapping attitude to whomever comes near. I know I could use a little reminder now and then, that what I do for a living ain’t all that bad, and I owe my customers a great deal of gratitude for their patronage and for putting up with this snarly old mechanic. I guess in a way you take those average days in your own little comfort zone and forget there is more to what makes the world go around besides the next car you’re working on. Sometimes it might take a little nudge from an outside source to get you to realize it.

 

Recently I took a few days off and ventured out on a road trip with my wife to one of her “comfort zones”. Ok, I was “volun-told” by the wife, but I didn’t complain too much. (If you’re married…you know what I mean. She insisted that I go; said I needed a break.) It was three days of little old ladies, sewing machines, and quilts. Yes, quilts. My wife is a very accomplished quilter, and I know about as much about quilting as she does cars. I didn’t have any tools, scanners, or hoods to hide under with me. This adventure is definitely out of my comfort zone.

 

My wife was the guest speaker for this quilting retreat. Me… I was the “mule” for the weekend. Well over a hundred ladies with scissors, big fancy (expensive) sewing machines, and colorful fabric were on hand. They kept me busy carrying their machines from the parking lot to their respective class rooms. There weren’t that many husbands at the retreat, and the hotel staff had their hands full with all the ladies, so it was a logical choice that whoever was available became the next bell boy, minus the quirky little cap of course. (And no, I didn’t accept any tips.) If you ask the wife she’ll tell ya, “Oh, he fusses but he loves every minute of it.” (Sure, sure honey, whatever ya think is fine with me.) I wasn’t concerned about what she was telling them anyway, I just pulled my ball cap down a bit tighter, and ask the next little lady with a sewing machine, “Where do ya want this one moved to, ma’am?”

 

This led me to think of how it is when a non-car person makes their way to the automotive repair shop. The actual interaction with the service writer or mechanic can be intimidating for them. For me, a weekend with the wife surrounded by thread and quilts is just about as intimidating. Ok, maybe not nearly as bad, but those little ladies sure know just how to make a grown man blush. Especially when one of them asks me something about their sewing machine, or dare I say… ask me something about quilting. Look… I know what a PCM and a ball joint are, but I haven’t a clue what flying geese or half-square triangles are. And, these ladies loved to rub it in. Uncomfortable, yes, intimidating…well, that gets rather interesting to answer that one. Let’s put it this way, when these ladies stuck me in front of a sewing machine, and clued me in on which buttons to push to make this thing sew… yea…that was intimidating. They got quite a chuckle out of watching some big burly guy fumble around with a sharp needle trying to hold a thin piece of fabric with his big nubby fingers. Sooner or later one of them would push me aside and say, “Here, let me show ya how to do this.” I’d like to think that I can learn how operate any sort of machinery, even one of these ultra-expensive sewing machines…but these ladies…well, they’re in a league of their own. It’s going to take me a lot of practice to get up to their level. It’s pretty intimidating to say the least when they make it look so easy, and I can’t even figure out how to sew a straight line.

 

I’ve got to keep this in mind when I’m back at the shop. I should try harder not to be so intimidating, work on keeping things on common ground, and not so overwhelming for the customer, especially one who is feeling uncomfortable about having some stranger they just met work on their car. I certainly can take some lessons from those little ladies at the quilting retreat. They did their best to make me feel comfortable, even if I did have to endure a little ribbing from them, but it was all in fun. The real heart of the intimidation was trying to hold a conversation with them and not having a clue what they were talking about, or what they were doing. (Sounds like talking to some mechanics aye?) I got it ladies…thank you. Now the big thing is… can I turn this experience of what it’s like to be out of my comfort zone, and turn it into my average day? I’m sure going to try.

 


View full article

Link to comment
Share on other sites



My wife and I ran a quilting store several years ago... (total money pit BTW) so many slow days at the repair shop were divided up between the repair shop and the quilt store. The guys in the shop use to say, "Gonzo in the morning and Gonzetta in the afternoon." Still don't know jack about quilting even after owning a store all those years. LOL

  • Like 1
Link to comment
Share on other sites

  • Have you checked out Joe's Latest Blog?

         5 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Changing The Industry
      Enhancing Shop Operations with John Heller of PartsTech
    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Changing The Industry
      The Basics of Owning An Auto Repair Shop - Part 5
    • By carmcapriotto
      The Weekly Blitz is brought to you by our friends over at Shop Marketing Pros. If you want to take your shop to the next level, you need great marketing. Shop Marketing Pros does top-tier marketing for top-tier shops.
      Click here to learn more about Top Tier Marketing by Shop Marketing Pros and schedule a demo:https://shopmarketingpros.com/chris/
      Check out their podcast here: https://autorepairmarketing.captivate.fm/
      If you would like to join their private Facebook group go here: https://www.facebook.com/groups/autorepairmarketingmastermind
      In this episode, Chris Cotton from Auto Fix Auto Shop Coaching explores the issue of transition leaks in auto repair shops. He explains how frequent task-switching hampers productivity and energy levels for shop owners, service advisors, and technicians. Chris advocates for batch processing to consolidate similar tasks, thereby reducing transition leaks and increasing efficiency. He advises reorganizing work schedules to minimize cognitive load and suggests that while flexibility is necessary, intentional planning can greatly enhance productivity. The episode wraps up with Chris encouraging listeners to embrace growth and efficiency, thanking the sponsor, and promoting a positive work ethic.
       
      Transition Leaks (00:00:06) Explanation of the concept and its impact on auto repair shop owners, service advisors, and technicians.
       
      Impact on Efficiency (00:02:27) Discussion on how transition leaks lead to lost efficiency and diminished capacity for delivering high-quality service.
       
      Batch Processing Strategy (00:04:48) Explanation of the batch processing strategy to combat transition leaks and improve productivity.
       
      Applying the Concept (00:07:03) Guidance on analyzing and reorganizing schedules to minimize transition leaks and increase efficiency.
       
      Embracing Change (00:09:11) Encouragement to prioritize efficiency and quality by embracing a new way of organizing work schedules.
       
      Connect with Chris:
       
      [email protected]
      Phone: 940.400.1008
      www.autoshopcoaching.com
      Facebook: https://www.facebook.com/
      AutoFixAutoShopCoachingYoutube: https://bit.ly/3ClX0ae
       
      #autofixautoshopcoaching #autofixbeautofixing #autoshopprofits #autoshopprofit #autoshopprofitsfirst #autoshopleadership #autoshopmanagement #autorepairshopcoaching #autorepairshopconsulting #autorepairshoptraining #autorepairshop #autorepair #serviceadvisor #serviceadvisorefficiency #autorepairshopmarketing #theweeklyblitz #autofix #shopmarketingpros
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors

×
×
  • Create New...