Quantcast
Jump to content

2014 Ford E350 6.8L


Recommended Posts

Ok guys got a 14 E350 6.8 , P0219= Engine overspeed condition Vehicle has intermotive module for wheelchair lift , I have unplugged it and eliminated it. Driving 40 MPH test drive , throttle released or slowing down engine revs goes into limp . as long as you are moving it is fine I can clear code with verus and off it goes. Mitchell mentions that data stored must need reflash. I called ford they are lost. I just keep going back to this Intermotive module . Anyone ever seen this code. P0219. Thanks David

Link to comment
Share on other sites

I've been reading up on the P0219 code. One of the factors that seems to pop up is wheel slip. In other words... are all the wheel speed sensors working properly? Maybe, that could do it... or it could be a fault in the PCM. Hard to say... basically...I ain't got a clue. LOL

  • Like 1
Link to comment
Share on other sites

Thanks Gonzo, FYI / After 6 hours diag time, We have narrowed it down to transmission, off to the stealership it goes . I am sure they are gonna buck the warranty because of the wheelchair lift. I will keep you informed.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Have you checked out Joe's Latest Blog?

         5 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics



  • Our Sponsors

×
×
  • Create New...