Quantcast
Jump to content









Technician Interview Process


Go to solution Solved by Shopcat,

Recommended Posts

When you all interview a potential technician, do you have a specific series of technical/behavioral questions you use to determine his/her diagnostic aptitude? The reason I ask is we have had technicians in the past who have been mechanics for 10+ years but after hiring them we find out they are not very strong in diagnostics, especially electrical. Just trying to see if there was something you all do during the interview process that helps you identify if the candidate is going to be strong in diagnostics.......

Link to comment
Share on other sites

The few people I have had apply I always put through a working interview. I always have at least 1 car that I am flipping and have them do a repair to the vehicle. One guy that I though was more of a parts changer I put on head gaskets on a toyota 3.4 and now I have to put it back together.

 

Another one said he was a good electrical guy and I pulled the ATC fuse on a chevy truck and the service 4WD light came on. He scanned it, had no communication, sat down in front of a wiring diagram and then walked over to the truck to look for the fuse and saw where I pulled it. He got a job.

  • Like 1
Link to comment
Share on other sites

I just spoke to my lead technician today and we are going to implement that idea on my personal vehicle for our next interview with a potential technician. I think it will give us a better understanding of if the technician's thought process for diagnostic work is what we are looking for or not.

  • Like 1
Link to comment
Share on other sites

That's why I insist on ASE certification. In my opinion the company lacks severely in marketing us but if a guy can't pass the tests I don't want him working on my car. The tests are easy for anyone who knows what they are doing. I hire people that are ase certified and can pass a drug test, that last one seems to be the most difficult for some. Lately I've put new hires on a 2-4 week trial, their work ethic and attitude shows itself quickly. Everyone starts like I did, at the bottom. Some guys are too good to sweep or fix flats, they would prefer to watch the guy who signs their checks do the bs work. Lol

 

I like the idea of the skills test, but do you pay the applicant while he's proving himself?

Edited by alfredauto
Link to comment
Share on other sites

  • Solution

5 star, I developed a pre employment questionnaire for a client that asks specifically about their experience with the following scale.

 

1. no experience

2. not frequently performed

3. need help performing

4.. need little help

5. no help needed

 

Next I have questions about 20 plus tasks routinely done at this shop. Then a technician tool inventory , ASE Certs, 20 ASE style questions that indicate specific skills for this shop. This is filled out with the application on site and never leaves the shop.

 

The following admonishment is listed at the top :" Failure to answer the following questions truthfully could result in reduced wages or termination if you are hired and it is discovered you were not truthful" .

 

 

This has help the shop enormously, After reviewing a few of these you will interview ONLY the great applicants .

  • Like 1
Link to comment
Share on other sites

Passing a drug test is the biggest hurdle.

Is there a drug test you can test someone to see if they are doing drugs on the job? No there isn't. What someone does at home is there business is it not. Until there is a test that will I don't support these so called drug test. Don't you think its against peoples rights?

Link to comment
Share on other sites

So I have a tech coming in for an interview this Friday so I decided to put together my own written test. I tried to attach it, but I received an error. Here it is pasted below for you all to use:

 

 

 

1. Technician A says constant-running release bearings are used with hydraulically controlled clutches. Technician B says release bearings move away from the pressure plate to disengage the clutch. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

2. All of the following are true about removing a differential assembly EXCEPT:
A. the axle shafts must be removed.
B. the bearing caps should be marked to the housing.
C. the bearing races and shim pack should not be mixed up.
D. the pinion gear always stays in the axle housing.

3. Which of the following is the best way to check component wear when assembling a transfer case?
A. Prelube the components
B. Clean components thoroughly
C. Clean all sealing surfaces
D. Measure clearances

4. The ignition module uses the digital signal received from the PCM for:
A. rpm input.
B. Hall effect timing.
C. #1 cylinder signal.
D. Computed timing signal.

5. While testing a vehicle for no-start, Technician A says that since there is battery voltage at the electric fuel pump connector with no fuel pump operation it must be a bad fuel pump. Technician B disagrees stating that a voltage drop check should be made at the fuel pump connector before the fuel pump is replaced. Who is right?
A. Technician A only
B. B only
C. Both A and B
D. Neither A nor B

6. A 12-volt battery has just failed a capacity test and is being charged at 40 amps. After three minutes of charge, with the charger still operating, a voltmeter is hooked up across the battery and reads 15 .8 volts. What does this indicate?
A. The battery should be slow charged and put back into service.
B. The battery’s electrolyte should be replaced.
C. The battery is sulfated and should be replaced.
D. This is normal; continue fast charge and return to service.




7. During a stall test, the stall speed is above specifications. Technician A says the exhaust system may be restricted. Technician B says the engine may have low compression. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

8. A customer explain that, “Intermittently the MIL will come on, and transmission will only have one forward speed.” Sometimes after the ignition is cycled the transmission functions normally until the same scenario reappears. While pressure testing, pressure in all ranges are found to be high. Technician A says the problem could be intermittent loss of electrical power to the transmission. Technician B says out-of-range turbine-to-output shaft speed sensor ratio during a shift could be the cause. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

9. During a main line pressure test, the pressure gradually decreases at higher engine speeds. The MOST likely cause of this problem could be:
A. a worn oil pump
B. a restricted oil filter.
C. a stuck pressure regulator.
D. a plugged modulator hose.

10. The headlights on a vehicle go out intermittently and come back on in a few minutes. Technician A says this problem may be caused by an intermittent short to ground. Technician B says this problem may be caused by high charging system voltage. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

11. With the ignition switch off, the ohmmeter leads are connected from the starter solenoid S terminal to the solenoid case. The ohmmeter provides an infinite reading. The cause of this reading could be:
A. the solenoid pull-in winding is grounded.
B. the solenoid hold-in winding is open.
C. the solenoid pull-in winding is shorted.
D. the solenoid hold-in winding is shorted.

12. While diagnosing the cause of a blown fuse in the blower motor circuit, Technician A says a short in the blower motor circuit could cause the fuse to blow. Technician B says an open field winding in the blower motor could have caused the fuse to blow. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B
13. A technician finds that an air-conditioning system has excessive high-side pressure. The low-side pressure is normal to high. A probable cause of this problem cause of this problem is:
A. the condenser air passages are restricted.
B. a leaking thermostatic expansion valve.
C. an open bypass valve.
D. a malfunctioning vapor control switch.

14. Technician A says that excessive steering wheel play can be caused by worn tie-rod ball sockets. Technician B says that steering wheel play can be caused by a worn idler arm. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

15. The thrust angle on a front-wheel drive vehicle is more than specified, and the thrust line is positioned to the left of the geometric centerline. This problem could be caused by:
A. Excessive toe-out on the left rear wheel.
B. Excessive toe-out on the right rear wheel.
C. Excessive positive camber on the left rear wheel.
D. Excessive wear in the left rear lower ball joint.

16. A voltage-drop test is performed on the fuel pump circuit. Technician A says a low-voltage drop across the fuel pump indicates that the fuel pump is serviceable. Technician B says that a high-voltage drop across the fuel pump relay switch indicates that the switch is serviceable. Who is right?
A. Technician A only
B. Technician B only
C. Both A and B
D. Neither A nor B

17. Engine Coolant Temperature integrity is being discussed. Technician A says the ECT readings can be compared with the IAT readings after the vehicle has set for at least eight hours. Technician B says the ECT should set a fault code if it is faulty. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B

18. During a cylinder leakage test, the engine is found to have 90 percent leakage on two cylinders next to one another. Neither cylinder will stay at top dead-center during the test. Which of these is the Most-Likely cause?
A. Burned exhaust valves on both cylinders
B. Holes in the top of the pistons
C. A damaged head gasket
D. A collapsed lifter or lash adjusters both cylinders




19. A loud thumping noise is present during all engine speeds. If the oil pressure is normal, which of these would MOST likely be the cause?
A. Worn pistons and cylinders
B. Loose flywheel bolts
C. Worn main bearings
D. Loose camshaft bearings

20. Undercar Specialist A says an oxygen sensor can be a voltage-producing sensor. Undercar Specialist B says an oxygen sensor is a thermistor sensor. Who is right?
A. A only
B. Specialist B only
C. Both A and B
D. Neither A or B

21. Undercar Specialist A says if vacuum is applied to a positive back pressure EGR valve when the engine is off, a good valve will open. Undercar Specialist B says if vacuum is applied to a negative back pressure EGR valve when the engine is off, a good valve will open. Who is right?

A. A only
B. Specialist B only
C. Both A and B
D. Neither A or B

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Have you checked out Joe's Latest Blog?

         3 comments
      I recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
      Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
      Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
      Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
      Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Changing The Industry
      Episode 156 - David Macholz on Rethinking Technician Certification and Training
    • By carmcapriotto
      Recorded Live at MACS (Mobile Air Climate Systems) 2024 Training Event & Trade Show, Adam Kimmel discusses the refrigerant and thermal management industry. He highlights the significance of air conditioning technology in vehicles, the essential use of fluorine in refrigerants, and the evolution of refrigerants for environmental safety. Adam Kimmel, Koura, [email protected] Show Notes
      The importance of air conditioning (00:00:01) Discussing the significance of air conditioning in vehicles and homes and the commitment of industry professionals. Understanding fluorine in refrigerants (00:01:53) Evolution of refrigerants (00:05:16) Future challenges and developments (00:10:19) Regulations and alternatives (00:14:18) Safety and handling precautions (00:16:10) Engineer training and transparency (00:17:11) Understanding refrigerant nomenclature (00:19:47) Efficiency and GWP (00:25:38) Thanks to our Partners, AAPEX and NAPA TRACS Set your sights on Las Vegas in 2024. Mark your calendar now … November 5th-7th, 2024. AAPEX - Now more than ever. And don’t miss the next free AAPEX webinar. Register now at http://AAPEXSHOW.COM/WEBINAR NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections            
      Click to go to the Podcast on Remarkable Results Radio
    • By carmcapriotto
      Thanks to our Partner, NAPA Auto Care Greg Buckley discusses the importance of using analytics and performance metrics in the automotive industry. He draws parallels between managing a sports team and running an auto repair shop, emphasizing the need for owners to understand their team's strengths and weaknesses. Greg explores the idea of incentivizing performance and accountability, similar to professional athletes. Greg shares his experience with nurturing technicians and the concept of having a "farm team" to develop skills. The conversation also touches on the need for better career pathing, training, and compensation methods to retain talent and improve the industry's professionalism. Greg Buckley, owner of Buckley’s Auto Care in Wilmington, and Millsboro DE.  Greg’s previous episodes HERE. Show Notes
      Introduction to the concept of scorecards (00:02:07) Greg introduces the concept of using scorecards and analytics to measure technician performance. Technician performance metrics (00:03:03) Discussion about technicians having access to their performance data and using it for career decisions. Contract-based employment (00:04:18) Exploring the idea of creating contracts and incentives based on performance metrics. Redefining technician compensation (00:05:20) Discussing the concept of incentives and redefining technician compensation based on performance. Building a career path (00:06:20) Exploring the idea of building a career path for technicians based on performance metrics. The role of analytics in decision-making (00:09:56) Drawing parallels between sports analytics and using analytics in the automotive industry. Training and certifications (00:11:58) Discussion about using shop management systems to track technician performance and productivity. Redefining technician levels (00:15:55) Proposing the idea of redefining technician levels and career pathing within the industry. Baseball analogies (00:16:38) Using baseball analogies to explain the concept of developing technicians through different levels. Understanding team strengths and weaknesses (00:18:16) Exploring the concept of knowing individual strengths and weaknesses to improve performance and success. Grooming technicians and creating career paths (00:19:09) The importance of grooming technicians and creating a career path for their growth and development. Enhancing compensation methods (00:25:05) Exploring the need for different methods of compensation to foster team growth and development. Agreement and rewards system (00:25:58) Discussing the concept of creating agreements and rewards systems based on performance metrics for technicians. Reflecting on baseball and strategic thinking (00:26:52) Reflecting on the strategic thinking involved in baseball and its relevance to business concepts.
      Thanks to our Partner, NAPA Auto Care Learn more about NAPA Auto Care and the benefits of being part of the NAPA family by visiting https://www.napaonline.com/en/auto-care Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections    
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors



×
×
  • Create New...